Engine-Codes.com
Engine-Codes – Subaru – P0141 Subaru

P0141 Subaru Code - O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 2

Quick Answer

The P0141 code for Subaru vehicles indicates a problem with the O2 sensor heater circuit in Bank 1 Sensor 2. Common causes include Faulty O2 sensor heater circuit, Damaged wiring or connectors, Blown fuse related to the O2 sensor heater circuit. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0141 Subaru indicates O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 2.
Common causes
Common causes include Faulty O2 sensor heater circuit, Damaged wiring or connectors, Blown fuse related to the O2 sensor heater circuit.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0141 Subaru Description

The P0141 code for Subaru vehicles indicates a problem with the O2 sensor heater circuit in Bank 1 Sensor 2. The oxygen sensor, also known as the O2 sensor, is a crucial component in the exhaust system that measures the amount of oxygen in the exhaust gases. The O2 sensor heater circuit is responsible for ensuring that the sensor reaches and maintains the optimal operating temperature quickly. This temperature is essential for accurate readings and proper functioning of the sensor.

OBDII Code P0141 Subaru - O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 2
P0141 Subaru Code - O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 2

Common Causes of P0141 Subaru

  1. Faulty O2 sensor heater circuit
  2. Damaged wiring or connectors
  3. Blown fuse related to the O2 sensor heater circuit
  4. ECM malfunction
  5. Corrosion or contamination in the sensor connections

Symptoms of P0141 Subaru

  1. Check engine light illuminated on the dashboard
  2. Decreased fuel efficiency
  3. Rough idling or stalling
  4. Increased emissions
  5. Poor engine performance

How to Fix P0141 Subaru

  1. Diagnose the O2 sensor heater circuit using a scan tool to confirm the P0141 code.
  2. Inspect the wiring and connectors for damage or corrosion, repairing or replacing as necessary.
  3. Check the fuse related to the O2 sensor heater circuit and replace if blown.
  4. Test the O2 sensor heater circuit for proper voltage and resistance, replacing the sensor if needed.
  5. Clear the trouble codes and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0141 Subaru

The typical repair costs for addressing the P0141 code in a Subaru vehicle can range from $150 to $400, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary depending on factors such as location, vehicle make and model, and engine type. It is advisable to check with local repair shops for a more accurate estimate tailored to your specific situation. Keep in mind that rates may be higher in metropolitan areas or at dealerships, while independent shops may offer more affordable prices.

What does this mean?

Tech Notes for P0141 Subaru

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is triggered when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the sensor and connector are OK, replacing the O2 Sensor 1 usually takes care of the problem.











User Submitted Video

When is the Code Detected?

Current amperage in the rear heated oxygen sensor heater circuit is out of the normal range.

Need more information about the P0141 Subaru code?

Need more information on how to fix the P0141 Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0141 Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0141 Subaru Code

1. What are the common symptoms of OBDII code P0141 in a Subaru?

- Common symptoms include poor fuel economy, rough idling, and an illuminated check engine light.

2. What does OBDII code P0141 indicate in a Subaru?

- OBDII code P0141 indicates a malfunction in the O2 sensor heater circuit for Bank 1 Sensor 2 in a Subaru.

3. What are the possible causes of OBDII code P0141 in a Subaru?

- Possible causes include a faulty O2 sensor, damaged wiring or connectors, a blown fuse, or a problem with the ECM.

4. How can I diagnose the O2 sensor heater circuit malfunction in a Subaru?

- Diagnose the issue by checking the O2 sensor heater circuit for continuity, inspecting wiring and connectors for damage, and testing the fuse related to the sensor heater.

5. Can I drive my Subaru with OBDII code P0141?

- It is best to avoid driving the vehicle with this code as it can lead to decreased fuel efficiency and potential damage to the catalytic converter.

6. How can I repair OBDII code P0141 in my Subaru?

- Repair options include replacing the faulty O2 sensor, repairing damaged wiring or connectors, replacing a blown fuse, or addressing any ECM issues.

7. Is it safe to reset the check engine light after fixing OBDII code P0141 in a Subaru?

- Yes, after fixing the issue causing the code, you can safely reset the check engine light using an OBDII scanner.

8. What is the role of Bank 1 Sensor 2 in a Subaru's exhaust system?

- Bank 1 Sensor 2 is responsible for monitoring the oxygen levels in the exhaust after the catalytic converter to ensure proper fuel mixture.

9. How can I prevent O2 sensor heater circuit malfunctions in my Subaru?

- To prevent such malfunctions, it is essential to perform regular vehicle maintenance, avoid driving with a misfiring engine, and address any issues promptly.

10. Can a Subaru dealership help diagnose and fix OBDII code P0141?

- Yes, Subaru dealerships have the expertise and equipment to diagnose and repair OBDII code P0141 effectively.

Discuss the causes and fixes for P0141 Subaru OBDII Code

Submit a New Comment

Code P0141 Subaru comments

No comments found for this page.