Engine-CodesBuick – P0141 Buick

P0141 Buick Code - HO2S Heater Performance Bank 1 Sensor 2

Quick Answer

The P0141 Buick diagnostic trouble code (DTC) refers to the HO2S (Heated Oxygen Sensor) Heater Performance for Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Damaged wiring or connectors leading to the sensor, Corrosion or contamination affecting the sensor's operation. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0141 Buick indicates HO2S Heater Performance Bank 1 Sensor 2.
Common causes
Common causes include Faulty oxygen sensor, Damaged wiring or connectors leading to the sensor, Corrosion or contamination affecting the sensor's operation.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0141 Buick Description

The P0141 Buick diagnostic trouble code (DTC) refers to the HO2S (Heated Oxygen Sensor) Heater Performance for Bank 1 Sensor 2. This code indicates that the oxygen sensor located downstream of the catalytic converter in Bank 1 is not operating within the expected parameters set by the vehicle's manufacturer. The oxygen sensor plays a crucial role in monitoring the amount of oxygen in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion.

OBDII Code P0141 Buick - HO2S Heater Performance Bank 1 Sensor 2
P0141 Buick Code - HO2S Heater Performance Bank 1 Sensor 2

Common Causes of P0141 Buick

  1. Faulty oxygen sensor.
  2. Damaged wiring or connectors leading to the sensor.
  3. Corrosion or contamination affecting the sensor's operation.
  4. ECM software issues.
  5. Exhaust system leaks.

Symptoms of P0141 Buick

  1. Check Engine Light (MIL) illuminated on the dashboard.
  2. Reduced fuel efficiency.
  3. Rough idle or hesitation during acceleration.
  4. Increased emissions.
  5. Engine misfires.

How to Fix P0141 Buick

  1. Begin by conducting a visual inspection of the oxygen sensor and its wiring connections. Look for any signs of damage, corrosion, or contamination. Replace or repair any damaged components.
  2. Use a multimeter to test the resistance of the oxygen sensor heater circuit. If the resistance is out of spec, replace the sensor.
  3. Clear the DTC with an OBD-II scanner and monitor the sensor's operation using live data to ensure it is functioning correctly.
  4. If the issue persists, check for exhaust leaks or other potential causes that may be affecting the sensor's performance.

Cost to Fix P0141 Buick

The cost of repairing a P0141 Buick code can vary depending on the specific cause of the issue. In general, replacing an oxygen sensor can cost between $100 and $300, including parts and labor. Additional costs may apply if wiring repairs or other components need to be addressed. It's important to factor in diagnostic time and labor rates, which can range from $80 to $150 per hour at most auto repair shops. Prices may vary based on location, vehicle make and model, and the complexity of the repair.

Tech Notes for P0141 Buick

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.











User Submitted Video

Need more information about the P0141 Buick code?

Need more information on how to fix the P0141 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0141 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0141 Buick Code

No Frequently Asked Questions about P0141 Buick Code found.

Discuss the causes and fixes for P0141 Buick OBDII Code

  • Does this cause the windows to fog up Easier

  • Not at all.

  • Can anybody answer this question? On a 2001 Buick 3.8 liter I have a po141 code witch is o2 sensor bank 1 sensor 2 witch one is it the one before the cat or after the cat?

  • What model? Regal, LaSabre?
    "Sensor 2" means is the rear O2 sensor

    Sensor 2 = Rear Sensor = Downstream Sensor = After Catalytic Sensor

  • Had this come up just when my exhaust system went, would this go off because of holes in the tail pipe/muffler?

  • Yes. Holes in the exhaust system could alter the O2 sensors reading, but don't be surprise if the sensor has failed as well. O2 sensor problems are very common.

  • please help. i am using nissan tiida 2008 model. just of recent any rime i am driving and i get caught up in traffic, any slight attempt to accelerate or turtle d car it suddenly turn off.i.e d car go dead and i have to restart it and this process often continue any time i find my self in any traffic. on diagnosis it shows 02 sensor (pending). my question is ...... can 02 sensor cause power to cut off while driving?

  • No, the O2 sensor will not cause that type of problems.

    P0141 NISSAN - Rear Sensor Heater Circuit Malfunction Bank 1 Sensor 2
    Read more: https://www.autocodes.com/p...

  • 03 Buick rendezvous code shows P0141 wood that make it difficult for the tranny to change gears and for it to overheat

  • No, a bad Oxygen sensor won't cause transmission problems or the engine overheat.