Engine-Codes.com
Engine-Codes – Honda – P0141 2018 Honda CR-V

P0141 2018 Honda CR-V Code - Secondary Heated Oxygen Sensor 2 Heater Circuit Malfunction

Quick Answer

The P0141 code indicates a malfunction in the Secondary Heated Oxygen Sensor 2 Heater Circuit in a 2018 Honda CR-V. Common causes include Faulty Oxygen Sensor: The most common cause of the P0141 code is a faulty secondary heated oxygen sensor, Wiring Issues: Damage to the wiring or connectors in the oxygen sensor circuit can prevent the heater from functioning properly, Heater Circuit Failure: The heater circuit itself may fail due to internal faults or issues with the power supply. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0141 2018 Honda CR-V indicates Secondary Heated Oxygen Sensor 2 Heater Circuit Malfunction.
Common causes
Common causes include Faulty Oxygen Sensor: The most common cause of the P0141 code is a faulty secondary heated oxygen sensor, Wiring Issues: Damage to the wiring or connectors in the oxygen sensor circuit can prevent the heater from functioning properly, Heater Circuit Failure: The heater circuit itself may fail due to internal faults or issues with the power supply.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0141 2018 Honda CR-V Description

The P0141 code indicates a malfunction in the Secondary Heated Oxygen Sensor 2 Heater Circuit in a 2018 Honda CR-V. The oxygen sensor plays a crucial role in monitoring and adjusting the air-fuel ratio in the engine to ensure optimal combustion and reduce emissions. The secondary heated oxygen sensor, also known as the downstream oxygen sensor, is located after the catalytic converter and helps to monitor the efficiency of the catalytic converter.

OBDII Code P0141 2018 Honda CR-V - Secondary Heated Oxygen Sensor 2 Heater Circuit Malfunction
P0141 2018 Honda CR-V Code - Secondary Heated Oxygen Sensor 2 Heater Circuit Malfunction

Common Causes of P0141 2018 Honda CR-V

  1. Faulty Oxygen Sensor: The most common cause of the P0141 code is a faulty secondary heated oxygen sensor.
  2. Wiring Issues: Damage to the wiring or connectors in the oxygen sensor circuit can prevent the heater from functioning properly.
  3. Heater Circuit Failure: The heater circuit itself may fail due to internal faults or issues with the power supply.
  4. ECM Malfunction: A malfunction in the engine control module (ECM) can also trigger the P0141 code by not providing the correct signals to the oxygen sensor.

Symptoms of P0141 2018 Honda CR-V

  1. Check Engine Light: The most common symptom associated with the P0141 code is the illumination of the check engine light on the dashboard.
  2. Poor Fuel Economy: A malfunctioning oxygen sensor can cause the engine to run rich or lean, resulting in decreased fuel efficiency.
  3. Rough Idle: The engine may have a rough or unstable idle due to incorrect air-fuel mixture adjustments.
  4. Failed Emissions Test: If the oxygen sensor is not functioning correctly, the vehicle may fail emissions tests due to increased emissions.

How to Fix P0141 2018 Honda CR-V

  1. Diagnose the Issue: Use a diagnostic scanner to retrieve the specific fault code and confirm the malfunction in the secondary heated oxygen sensor 2 heater circuit.
  2. Inspect Wiring and Connectors: Check the wiring and connectors for any damage, corrosion, or loose connections. Repair or replace as necessary.
  3. Test Oxygen Sensor: Test the secondary oxygen sensor to ensure it is functioning correctly. Replace the sensor if it is faulty.
  4. Check Heater Circuit: Verify the integrity of the heater circuit in the oxygen sensor. Replace the sensor if the heater circuit is malfunctioning.
  5. Clear Codes and Recheck: After completing the repairs, clear the fault codes from the ECM and recheck for any recurring issues.

Cost to Fix P0141 2018 Honda CR-V

The cost of repairing a P0141 code in a 2018 Honda CR-V can vary depending on the cause of the issue and the labor rates at the repair shop. Generally, the cost of replacing a secondary heated oxygen sensor can range from $200 to $400, including parts and labor. Additional costs may apply if there are wiring issues or ECM malfunctions that need to be addressed.

What does this mean?

Tech Notes for P0141 2018 Honda CR-V

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is triggered when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the sensor and connector are OK, replacing the O2 Sensor 1 usually takes care of the problem.

Need more information about the P0141 2018 Honda CR-V code?

Need more information on how to fix the P0141 2018 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0141 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0141 2018 Honda CR-V Code

1. What are the common symptoms of OBDII code P0141 in a 2018 Honda CR-V?

The common symptoms of OBDII code P0141 in a 2018 Honda CR-V include poor fuel efficiency, rough idling, and potential stalling of the vehicle.

2. What does the OBDII code P0141 indicate in a 2018 Honda CR-V?

OBDII code P0141 in a 2018 Honda CR-V indicates a Secondary Heated Oxygen Sensor 2 Heater Circuit Malfunction, specifically related to the heating element of the sensor.

3. What are the possible causes of OBDII code P0141 in a 2018 Honda CR-V?

Possible causes of OBDII code P0141 in a 2018 Honda CR-V include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or issues with the vehicle's ECM.

4. How can I diagnose the OBDII code P0141 in my 2018 Honda CR-V?

To diagnose OBDII code P0141 in a 2018 Honda CR-V, you can use an OBDII scanner to read the code, inspect the oxygen sensor and its wiring, check the fuse related to the sensor, and perform a voltage test on the sensor's heater circuit.

5. Is it safe to continue driving my 2018 Honda CR-V with OBDII code P0141?

It is not recommended to continue driving your 2018 Honda CR-V with OBDII code P0141, as it can lead to decreased fuel efficiency, engine performance issues, and potential damage to the catalytic converter.

6. Can I repair OBDII code P0141 in my 2018 Honda CR-V myself?

Depending on your automotive repair skills, you may be able to repair OBDII code P0141 in your 2018 Honda CR-V yourself by replacing the faulty oxygen sensor, repairing damaged wiring, or addressing any other identified issues.

7. How much does it typically cost to repair OBDII code P0141 in a 2018 Honda CR-V?

The cost to repair OBDII code P0141 in a 2018 Honda CR-V can vary depending on the underlying cause, but it may range from $100 to $300 for parts and labor if done at a reputable repair shop.

8. Can a faulty oxygen sensor cause other issues in my 2018 Honda CR-V besides triggering OBDII code P0141?

Yes, a faulty oxygen sensor in your 2018 Honda CR-V can cause other issues such as poor engine performance, increased emissions, and potential damage to the catalytic converter if left unaddressed.

9. How often should the oxygen sensors be replaced in a 2018 Honda CR-V?

Oxygen sensors in a 2018 Honda CR-V typically last around 100,000 miles, but it is recommended to follow the manufacturer's maintenance schedule and replace them as needed to ensure optimal engine performance and emissions control.

10. Will resetting the OBDII code P0141 in my 2018 Honda CR-V make the issue go away permanently?

Resetting the OBDII code P0141 in your 2018 Honda CR-V may temporarily clear the warning light, but if the underlying issue causing the code is not fixed, the code is likely to reappear. It's important to diagnose and repair the root cause to resolve the problem permanently.

Discuss the causes and fixes for P0141 2018 Honda CR-V OBDII Code

Submit a New Comment

Code P0141 2018 Honda CR-V comments

No comments found for this page.