Engine-Codes.com
Engine-Codes – Pontiac – P0140 Pontiac

P0140 Pontiac Code - O2 Sensor Circuit No Activity Detected Bank 1 Sensor 2

Quick Answer

The P0140 diagnostic trouble code (DTC) for Pontiac vehicles indicates that there is no activity detected in the O2 sensor circuit for Bank 1 Sensor 2. Common causes include Faulty O2 sensor, Wiring or connector issues in the O2 sensor circuit, Exhaust leaks near the O2 sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0140 Pontiac indicates O2 Sensor Circuit No Activity Detected Bank 1 Sensor 2.
Common causes
Common causes include Faulty O2 sensor, Wiring or connector issues in the O2 sensor circuit, Exhaust leaks near the O2 sensor.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0140 Pontiac Description

The P0140 diagnostic trouble code (DTC) for Pontiac vehicles indicates that there is no activity detected in the O2 sensor circuit for Bank 1 Sensor 2. This sensor is located downstream of the catalytic converter and is responsible for monitoring the oxygen levels in the exhaust gases. The O2 sensor provides crucial data to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion efficiency.

OBDII Code P0140 Pontiac - O2 Sensor Circuit No Activity Detected Bank 1 Sensor 2
P0140 Pontiac Code - O2 Sensor Circuit No Activity Detected Bank 1 Sensor 2

Common Causes of P0140 Pontiac

  1. Faulty O2 sensor
  2. Wiring or connector issues in the O2 sensor circuit
  3. Exhaust leaks near the O2 sensor
  4. ECM software issues
  5. Catalytic converter failure

Symptoms of P0140 Pontiac

  1. Decreased fuel efficiency
  2. Rough idling or stalling
  3. Engine misfires
  4. Check Engine Light illuminated
  5. Failed emissions test

How to Fix P0140 Pontiac

  1. Begin by inspecting the O2 sensor and its wiring for any visible damage or corrosion.
  2. Test the O2 sensor using a multimeter to check for proper voltage output.
  3. Replace the O2 sensor if it is found to be faulty.
  4. Check and repair any damaged wiring or connectors in the O2 sensor circuit.
  5. Clear the DTC with a scan tool and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0140 Pontiac

The cost of repairing a P0140 O2 sensor circuit no activity detected code can vary depending on the specific cause of the issue. On average, replacing an O2 sensor can cost between $100 to $200 for the part, with additional labor costs ranging from $50 to $100. However, if the problem is related to wiring or connector issues, the repair costs may increase. It is recommended to consult with a certified mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of the vehicle. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and other factors.

What does this mean?

Tech Notes for P0140 Pontiac

Replacing the Rear Heated Oxygen Sensor Bank 1 usually takes care of the problem.

When is the Code Detected?

The P0140 code is set when the voltage signal sent from the sensor to the Engine Control Module is constant.

Need more information about the P0140 Pontiac code?

Need more information on how to fix the P0140 Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0140 Pontiac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0140 Pontiac Code

1. What are the common symptoms of OBDII code P0140 in a Pontiac related to the O2 sensor circuit?

- Common symptoms include poor fuel economy, rough idling, hesitation during acceleration, and the illumination of the check engine light.

2. What does the OBDII code P0140 Pontiac O2 Sensor Circuit No Activity Detected Bank 1 Sensor 2 indicate?

- This code indicates that the O2 sensor located after the catalytic converter on bank 1 (side of the engine with cylinder 1) is not sending any signal or has very low activity.

3. What are the possible causes of the O2 Sensor Circuit No Activity Detected Bank 1 Sensor 2 code in a Pontiac?

- Possible causes include a faulty O2 sensor, damaged wiring or connectors in the O2 sensor circuit, exhaust leaks, or a failed catalytic converter.

4. How can I diagnose the O2 Sensor Circuit No Activity Detected Bank 1 Sensor 2 code in my Pontiac?

- Diagnose the code by visually inspecting the O2 sensor and its wiring, checking for exhaust leaks, using a scan tool to monitor O2 sensor data, and performing voltage tests on the sensor.

5. Can I drive my Pontiac with the P0140 OBDII code?

- It is not recommended to drive your Pontiac with this code for an extended period as it can lead to decreased fuel efficiency and potential damage to the catalytic converter.

6. How can I repair the O2 Sensor Circuit No Activity Detected Bank 1 Sensor 2 code in my Pontiac?

- Repair options include replacing the faulty O2 sensor, repairing damaged wiring or connectors, fixing any exhaust leaks, and addressing any issues with the catalytic converter.

7. Will resetting the check engine light fix the P0140 code in my Pontiac?

- Resetting the check engine light may temporarily clear the code, but it will likely return if the underlying issue with the O2 sensor circuit is not properly diagnosed and repaired.

8. How much does it typically cost to repair the OBDII code P0140 in a Pontiac?

- The cost of repairs can vary depending on the specific issue causing the code, but it may range from $100 to $300 for parts and labor.

9. Are there any DIY tips for addressing the P0140 code in a Pontiac?

- DIY tips include checking and cleaning O2 sensor connectors, inspecting for visible damage in the wiring, and ensuring the sensor is properly secured in place.

10. Can a faulty O2 sensor cause other problems in my Pontiac if left unrepaired?

- Yes, a faulty O2 sensor can lead to decreased fuel efficiency, increased emissions, poor engine performance, and potential damage to the catalytic converter if left unrepaired.

Discuss the causes and fixes for P0140 Pontiac OBDII Code

Submit a New Comment

Code P0140 Pontiac comments

No comments found for this page.