P013F 2017 GMC Sierra Code - HO2S Delay Response Lean to Rich Bank 1 Sensor 2
Quick Answer
The diagnostic trouble code P013F for a 2017 GMC Sierra refers to a HO2S (Heated Oxygen Sensor) Delay Response Lean to Rich Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Wiring or connector issues, Exhaust leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013F 2017 GMC Sierra indicates HO2S Delay Response Lean to Rich Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring or connector issues, Exhaust leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P013F 2017 GMC Sierra Description
The diagnostic trouble code P013F for a 2017 GMC Sierra refers to a HO2S (Heated Oxygen Sensor) Delay Response Lean to Rich Bank 1 Sensor 2. This code indicates that the oxygen sensor located downstream of the catalytic converter on bank 1 is experiencing a delay in switching from a lean to a rich air/fuel mixture. The oxygen sensor plays a crucial role in monitoring the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air/fuel ratio for optimal combustion.
Common Causes of P013F 2017 GMC Sierra
- Faulty oxygen sensor
- Wiring or connector issues
- Exhaust leaks
- Vacuum leaks
- Malfunctioning ECM
Symptoms of P013F 2017 GMC Sierra
- Rough idling or stalling
- Reduced fuel efficiency
- Engine hesitation or surging
- Illuminated check engine light
- Failed emissions test
How to Fix P013F 2017 GMC Sierra
- Use an OBD-II scanner to retrieve the specific trouble code and confirm the issue.
- Inspect the oxygen sensor, wiring, and connectors for any visible damage or corrosion.
- Test the oxygen sensor's response time using a multimeter or oscilloscope.
- Replace the oxygen sensor if it is found to be faulty or not responding correctly.
- Clear the trouble code from the ECM's memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix P013F 2017 GMC Sierra
The typical repair costs for addressing a HO2S Delay Response Lean to Rich Bank 1 Sensor 2 code can vary depending on the specific cause of the issue. In general, the cost of replacing an oxygen sensor ranges from $100 to $300, including parts and labor. Additional costs may apply if wiring or connector repairs are necessary. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle.
Tech Notes for P013F 2017 GMC Sierra
User Submitted Video
Need more information about the P013F 2017 GMC Sierra code?
Need more information on how to fix the P013F 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013F 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013F 2017 GMC Sierra Code
What does the OBDII code P013F mean on a 2017 GMC Sierra?
P013F indicates that the oxygen sensor (HO2S) on Bank 1 Sensor 2 is taking too long to switch from a lean to a rich condition, suggesting a potential issue with the sensor or related components.
What are the symptoms of a P013F code in a 2017 GMC Sierra?
Common symptoms include an illuminated check engine light, decreased fuel efficiency, rough idling, or poor engine performance.
What causes the P013F code to appear on a 2017 GMC Sierra?
The code can be triggered by a faulty oxygen sensor, exhaust leaks, a damaged wiring harness, or issues with the engine control module (ECM).
Is it safe to drive a 2017 GMC Sierra with a P013F code?
While the vehicle may still be drivable, ignoring the issue can lead to reduced fuel efficiency and potentially damage the catalytic converter over time.
How do you diagnose a P013F code on a 2017 GMC Sierra?
A technician will inspect the oxygen sensor, check for exhaust leaks, test the wiring and connectors, and use a scan tool to monitor sensor performance.
Can a dirty or failing oxygen sensor cause the P013F code?
Yes, a dirty or failing oxygen sensor can cause delayed responses and trigger the P013F code.
Can an exhaust leak cause the P013F code on a 2017 GMC Sierra?
Yes, an exhaust leak can disrupt the oxygen sensor's readings and lead to a P013F code.
How do you fix the P013F code on a 2017 GMC Sierra?
Repairs may include replacing the oxygen sensor, fixing exhaust leaks, repairing or replacing damaged wiring, or reprogramming the ECM if necessary.
How much does it cost to repair a P013F code on a 2017 GMC Sierra?
Repair costs vary depending on the issue, but replacing an oxygen sensor typically ranges from $150 to $300, including parts and labor.
Can a bad catalytic converter cause the P013F code?
While rare, a failing catalytic converter can indirectly affect oxygen sensor performance and trigger the P013F code.
Discuss the causes and fixes for P013F 2017 GMC Sierra OBDII Code
Code P013F 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.