P013E 2018 GMC Sierra Code - HO2S Delay Response Rich to Lean Bank 1 Sensor 2
Quick Answer
The P013E diagnostic trouble code (DTC) for a 2018 GMC Sierra refers to a problem with the HO2S (Heated Oxygen Sensor) Delay Response Rich to Lean for Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Wiring or connector issues, ECM malfunction. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013E 2018 GMC Sierra indicates HO2S Delay Response Rich to Lean Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring or connector issues, ECM malfunction.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P013E 2018 GMC Sierra Description
The P013E diagnostic trouble code (DTC) for a 2018 GMC Sierra refers to a problem with the HO2S (Heated Oxygen Sensor) Delay Response Rich to Lean for Bank 1 Sensor 2. This code indicates that the oxygen sensor located downstream of the catalytic converter on bank 1 is experiencing a delay in switching from a rich (excess fuel) to lean (excess oxygen) condition. This delay can lead to incorrect fuel mixture readings being sent to the engine control module (ECM), resulting in poor engine performance, reduced fuel efficiency, and increased emissions.
Common Causes of P013E 2018 GMC Sierra
- Faulty oxygen sensor
- Wiring or connector issues
- ECM malfunction
- Exhaust system leaks
- Fuel system problems
Symptoms of P013E 2018 GMC Sierra
- Rough engine idle
- Hesitation during acceleration
- Decreased fuel efficiency
- Increased emissions output
- Difficulty starting the engine
How to Fix P013E 2018 GMC Sierra
- Diagnose the specific cause of the issue by conducting a thorough inspection of the oxygen sensor, wiring, connectors, and ECM.
- Replace the faulty oxygen sensor with a new, OEM-quality sensor designed for the vehicle's make and model.
- Repair any damaged wiring or connectors, ensuring proper connections and insulation.
- Clear the DTC from the ECM's memory using a diagnostic scan tool.
- Test drive the vehicle to verify that the issue has been resolved and that the oxygen sensor is responding correctly.
Cost to Fix P013E 2018 GMC Sierra
The typical repair costs for addressing a P013E DTC on a 2018 GMC Sierra can vary depending on the specific cause of the issue and the cost of parts and labor. In general, replacing an oxygen sensor can range from $100 to $300, while addressing wiring or connector issues may add to the total cost. Labor rates at auto repair shops can vary between $80 and $150 per hour, so the total repair cost may range from $200 to $500 or more. It is recommended to consult with a local auto repair shop for a more accurate estimate based on the specific circumstances of the vehicle.
Tech Notes for P013E 2018 GMC Sierra
User Submitted Video
Need more information about the P013E 2018 GMC Sierra code?
Need more information on how to fix the P013E 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013E 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013E 2018 GMC Sierra Code
No Frequently Asked Questions about P013E 2018 GMC Sierra Code found.
Discuss the causes and fixes for P013E 2018 GMC Sierra OBDII Code
Code P013E 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.