P013E 2017 GMC Sierra Code - HO2S Delay Response Rich to Lean Bank 1 Sensor 2
Quick Answer
The P013E diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates a problem with the HO2S (Heated Oxygen Sensor) Delay Response Rich to Lean for Bank 1 Sensor 2. Common causes include Faulty HO2S sensor, Wiring or connector issues, Exhaust leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013E 2017 GMC Sierra indicates HO2S Delay Response Rich to Lean Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty HO2S sensor, Wiring or connector issues, Exhaust leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P013E 2017 GMC Sierra Description
The P013E diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates a problem with the HO2S (Heated Oxygen Sensor) Delay Response Rich to Lean for Bank 1 Sensor 2. This means that the oxygen sensor located downstream of the catalytic converter on the bank 1 side of the engine is taking too long to switch from a rich (too much fuel) to lean (too little fuel) air/fuel mixture. This delay in response can lead to inefficient fuel combustion, reduced engine performance, and increased emissions.
Common Causes of P013E 2017 GMC Sierra
- Faulty HO2S sensor
- Wiring or connector issues
- Exhaust leaks
- Vacuum leaks
- ECM malfunction
Symptoms of P013E 2017 GMC Sierra
- Rough idling or stalling
- Decreased fuel efficiency
- Engine misfires
- Check Engine Light illuminated
- Increased emissions
How to Fix P013E 2017 GMC Sierra
- Use an OBD-II scanner to confirm the P013E code and identify the specific sensor location.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Check for exhaust leaks and repair any leaks found.
- Test the HO2S sensor using a multimeter to determine if it is functioning properly, replacing it if necessary.
- Clear the code from the ECM and perform a test drive to ensure the issue has been resolved.
Cost to Fix P013E 2017 GMC Sierra
The cost of repairing a P013E code on a 2017 GMC Sierra can vary depending on the specific cause of the issue. In general, the cost of parts for a new HO2S sensor can range from $50 to $200, while labor costs can range from $100 to $300. Overall, the total repair cost could be anywhere from $150 to $500. It's important to note that these are rough estimates, and actual costs may vary based on factors such as location, labor rates, and any additional repairs needed. It's recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate.
Tech Notes for P013E 2017 GMC Sierra
User Submitted Video
Need more information about the P013E 2017 GMC Sierra code?
Need more information on how to fix the P013E 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013E 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013E 2017 GMC Sierra Code
1. What does the OBDII code P013E mean on a 2017 GMC Sierra?
P013E indicates that the oxygen sensor (HO2S) on Bank 1 Sensor 2 is taking too long to switch from a rich to a lean condition, suggesting a delayed response.
2. What are the common symptoms of P013E in a 2017 GMC Sierra?
Symptoms may include an illuminated check engine light, reduced fuel efficiency, rough idling, or slight hesitation during acceleration.
3. What causes the P013E code in a 2017 GMC Sierra?
Common causes include a faulty downstream oxygen sensor, exhaust leaks, damaged wiring or connectors, or an issue with the engine control module (ECM).
4. Is the P013E code serious on a 2017 GMC Sierra?
While it may not cause immediate drivability issues, ignoring it can lead to reduced fuel efficiency and potential damage to the catalytic converter over time.
5. How do you diagnose the P013E code in a 2017 GMC Sierra?
Diagnosis involves scanning for additional codes, inspecting the oxygen sensor and its wiring, checking for exhaust leaks, and monitoring live data from the oxygen sensor.
6. Can a dirty air filter cause the P013E code on a 2017 GMC Sierra?
While unlikely, a dirty air filter can contribute to improper air-fuel mixture, which may indirectly affect oxygen sensor readings.
7. How do you fix the P013E code on a 2017 GMC Sierra?
Possible fixes include replacing the downstream oxygen sensor, repairing exhaust leaks, fixing damaged wiring, or updating/reprogramming the ECM.
8. How much does it cost to repair the P013E code on a 2017 GMC Sierra?
Replacing a downstream oxygen sensor typically costs between $150 and $300, but costs may vary depending on labor rates and diagnostic needs.
9. Can a P013E code be caused by bad fuel quality in a 2017 GMC Sierra?
Poor fuel quality is unlikely to directly cause P013E, but it can lead to incomplete combustion, which may affect sensor readings.
10. Can I drive my 2017 GMC Sierra with a P013E code?
While the truck may still be drivable, it’s best to address the issue promptly to avoid potential damage to the catalytic converter and ensure optimal performance.
Discuss the causes and fixes for P013E 2017 GMC Sierra OBDII Code
Code P013E 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.