P013E 2017 Chevrolet Silverado Code - HO2S Delay Response Rich to Lean Bank 1 Sensor 2
Quick Answer
The diagnostic trouble code P013E for a 2017 Chevrolet Silverado indicates a problem with the HO2S (Heated Oxygen Sensor) located after the catalytic converter on Bank 1, Sensor 2. Common causes include Faulty HO2S sensor, Wiring or connector issues, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013E 2017 Chevrolet Silverado indicates HO2S Delay Response Rich to Lean Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty HO2S sensor, Wiring or connector issues, Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P013E 2017 Chevrolet Silverado Description
The diagnostic trouble code P013E for a 2017 Chevrolet Silverado indicates a problem with the HO2S (Heated Oxygen Sensor) located after the catalytic converter on Bank 1, Sensor 2. The code specifically points to a delay in the response of the sensor from a rich (too much fuel) to lean (too little fuel) condition. This delay can lead to incorrect fuel mixture readings being sent to the engine control module (ECM), impacting the vehicle's performance and emissions.
Common Causes of P013E 2017 Chevrolet Silverado
- Faulty HO2S sensor
- Wiring or connector issues
- Exhaust leaks near the sensor
- Fuel system problems
- ECM software issues
Symptoms of P013E 2017 Chevrolet Silverado
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Check Engine Light illuminated
- Increased emissions
How to Fix P013E 2017 Chevrolet Silverado
- Begin by diagnosing the specific cause of the delay response, such as testing the HO2S sensor, inspecting wiring, and checking for exhaust leaks.
- Replace the Bank 1, Sensor 2 HO2S sensor if it is found to be faulty.
- Repair any damaged wiring or connectors.
- Address any exhaust leaks near the sensor.
- Clear the diagnostic trouble codes and perform a test drive to ensure the issue has been resolved.
Cost to Fix P013E 2017 Chevrolet Silverado
The cost of repairing a HO2S Delay Response Rich to Lean Bank 1 Sensor 2 issue can vary depending on the specific cause of the problem and the labor rates in your area. Typically, replacing the HO2S sensor can cost between $150 to $300, including parts and labor. Additional costs may apply if wiring repairs or other components need attention. It's recommended to consult with a qualified mechanic or auto repair shop for an accurate estimate based on your vehicle's make and model. Labor rates at auto repair shops can range from $80 to $150 per hour, so the total cost may fluctuate accordingly.
Tech Notes for P013E 2017 Chevrolet Silverado
User Submitted Video
Need more information about the P013E 2017 Chevrolet Silverado code?
Need more information on how to fix the P013E 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013E 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013E 2017 Chevrolet Silverado Code
No Frequently Asked Questions about P013E 2017 Chevrolet Silverado Code found.
Discuss the causes and fixes for P013E 2017 Chevrolet Silverado OBDII Code
Code P013E 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.