P013E 2016 GMC Sierra Code - HO2S Delay Response Rich to Lean Bank 1 Sensor 2
Quick Answer
The diagnostic trouble code P013E for a 2016 GMC Sierra indicates a problem with the HO2S (Heated Oxygen Sensor) Delay Response Rich to Lean for Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Vacuum leak in the intake system, Fuel delivery problem (e.g., clogged fuel injectors). Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013E 2016 GMC Sierra indicates HO2S Delay Response Rich to Lean Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Vacuum leak in the intake system, Fuel delivery problem (e.g., clogged fuel injectors).
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P013E 2016 GMC Sierra Description
The diagnostic trouble code P013E for a 2016 GMC Sierra indicates a problem with the HO2S (Heated Oxygen Sensor) Delay Response Rich to Lean for Bank 1 Sensor 2. This means that the oxygen sensor located downstream of the catalytic converter on bank 1 is taking longer than expected to switch from a rich (too much fuel) to lean (too little fuel) condition. This could be caused by a variety of issues, such as a faulty oxygen sensor, a vacuum leak, a fuel delivery problem, or an exhaust system leak.
Common Causes of P013E 2016 GMC Sierra
- Faulty oxygen sensor
- Vacuum leak in the intake system
- Fuel delivery problem (e.g., clogged fuel injectors)
- Exhaust system leak
- Wiring or connector issues related to the oxygen sensor
Symptoms of P013E 2016 GMC Sierra
- Decreased fuel efficiency
- Rough idling or stalling
- Engine hesitation or misfiring
- Illuminated check engine light
- Reduced engine performance
How to Fix P013E 2016 GMC Sierra
- Use an OBD-II scanner to read and clear the fault codes.
- Inspect the oxygen sensor for any signs of damage or contamination.
- Check for vacuum leaks in the intake system and repair as necessary.
- Test the fuel delivery system for proper functioning, including fuel injectors.
- Inspect the exhaust system for leaks and repair any identified issues.
Cost to Fix P013E 2016 GMC Sierra
The cost of repairing the HO2S Delay Response Rich to Lean Bank 1 Sensor 2 code can vary depending on the specific cause of the issue. On average, the cost of replacing an oxygen sensor can range from $100 to $250, including parts and labor. Additional costs may be incurred if other components need to be repaired or replaced. It is recommended to consult with a qualified mechanic or auto repair shop for an accurate cost estimate based on your vehicle's make and model.
Tech Notes for P013E 2016 GMC Sierra
User Submitted Video
Need more information about the P013E 2016 GMC Sierra code?
Need more information on how to fix the P013E 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013E 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013E 2016 GMC Sierra Code
1. What does the OBDII code P013E mean on a 2016 GMC Sierra?
P013E indicates the oxygen sensor (HO2S) on Bank 1 Sensor 2 has a delayed response when switching from rich to lean conditions.
2. What are the symptoms of a P013E code on a 2016 GMC Sierra?
Common symptoms include poor fuel economy, a potential check engine light, and possibly rough idling or reduced engine performance.
3. What causes the P013E code on a 2016 GMC Sierra?
The code can be triggered by a faulty oxygen sensor, exhaust leaks, wiring or connector issues, or a malfunctioning engine control module (ECM).
4. Which oxygen sensor is Bank 1 Sensor 2 on a 2016 GMC Sierra?
Bank 1 Sensor 2 refers to the downstream oxygen sensor located after the catalytic converter on the side of the engine with cylinder 1.
5. Can an exhaust leak cause the P013E code?
Yes, an exhaust leak near the oxygen sensor can cause inaccurate readings and trigger the P013E code.
6. How do you diagnose the P013E code on a 2016 GMC Sierra?
Diagnosis typically involves using an OBDII scanner to read live data, inspecting the oxygen sensor and its wiring, checking for exhaust leaks, and testing fuel trims.
7. Can a dirty air filter cause the P013E code on a 2016 GMC Sierra?
While unlikely, a severely clogged air filter can impact the air-fuel mixture and indirectly affect oxygen sensor performance.
8. How do you fix the P013E code on a 2016 GMC Sierra?
Repairs may include replacing the downstream oxygen sensor, fixing any exhaust leaks, repairing damaged wiring, or reprogramming the ECM if needed.
9. Can I drive my 2016 GMC Sierra with a P013E code?
Driving with a P013E code is possible but not recommended, as it may lead to decreased fuel efficiency and potential damage to the catalytic converter.
10. How much does it cost to fix the P013E code on a 2016 GMC Sierra?
Repair costs can range from $150 to $400, depending on whether the issue is with the oxygen sensor, wiring, or another related component.
Discuss the causes and fixes for P013E 2016 GMC Sierra OBDII Code
Code P013E 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.