P013E 2015 GMC Sierra Code - HO2S Delay Response Rich to Lean Bank 1 Sensor 2
Quick Answer
The P013E diagnostic trouble code (DTC) for a 2015 GMC Sierra refers to a problem with the HO2S (Heated Oxygen Sensor) Delay Response Rich to Lean for Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Wiring or connector issues, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013E 2015 GMC Sierra indicates HO2S Delay Response Rich to Lean Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring or connector issues, Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P013E 2015 GMC Sierra Description
The P013E diagnostic trouble code (DTC) for a 2015 GMC Sierra refers to a problem with the HO2S (Heated Oxygen Sensor) Delay Response Rich to Lean for Bank 1 Sensor 2. This code indicates that the oxygen sensor located after the catalytic converter on bank 1 is experiencing a delay in switching from a rich to lean air/fuel mixture. The oxygen sensor plays a crucial role in monitoring the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air/fuel ratio for optimal combustion.
Common Causes of P013E 2015 GMC Sierra
- Faulty oxygen sensor
- Wiring or connector issues
- Exhaust leaks near the sensor
- ECM malfunction
- Fuel system problems
Symptoms of P013E 2015 GMC Sierra
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Illuminated check engine light
- Increased emissions
How to Fix P013E 2015 GMC Sierra
- Begin by performing a visual inspection of the oxygen sensor and its wiring for any signs of damage or corrosion.
- Use a scan tool to monitor the oxygen sensor's response time and check for any stored trouble codes.
- Test the oxygen sensor's voltage output and response time using a multimeter to determine if it is functioning correctly.
- If the oxygen sensor is faulty, replace it with a new, OEM-quality sensor and ensure proper installation.
- Clear the DTC and perform a test drive to verify that the issue has been resolved.
Cost to Fix P013E 2015 GMC Sierra
The typical repair costs for addressing a HO2S Delay Response Rich to Lean Bank 1 Sensor 2 code can vary depending on the specific cause of the issue. In general, replacing an oxygen sensor can cost between $100 and $300, including parts and labor. However, additional diagnostic time and potential repairs may increase the overall cost. It is recommended to consult with a trusted mechanic or auto repair shop for a more accurate estimate based on your vehicle's make and model. Keep in mind that labor rates can vary, with hourly rates typically ranging from $80 to $150.
Tech Notes for P013E 2015 GMC Sierra
User Submitted Video
Need more information about the P013E 2015 GMC Sierra code?
Need more information on how to fix the P013E 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013E 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013E 2015 GMC Sierra Code
No Frequently Asked Questions about P013E 2015 GMC Sierra Code found.
Discuss the causes and fixes for P013E 2015 GMC Sierra OBDII Code
Code P013E 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.