P013A 2015 GMC Sierra Code - HO2S Slow Response Rich to Lean Bank 1 Sensor 2
Quick Answer
The diagnostic trouble code P013A for a 2015 GMC Sierra indicates a HO2S (Heated Oxygen Sensor) slow response from rich to lean on Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Wiring or connector issues, Exhaust leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013A 2015 GMC Sierra indicates HO2S Slow Response Rich to Lean Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring or connector issues, Exhaust leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P013A 2015 GMC Sierra Description
The diagnostic trouble code P013A for a 2015 GMC Sierra indicates a HO2S (Heated Oxygen Sensor) slow response from rich to lean on Bank 1 Sensor 2. This means that the oxygen sensor located downstream of the catalytic converter on the bank of cylinders that includes cylinder 1 is not responding quickly enough to changes in the air-fuel mixture from rich (too much fuel) to lean (too little fuel). The oxygen sensor plays a crucial role in monitoring and adjusting the air-fuel ratio to ensure optimal combustion efficiency and reduce harmful emissions.
Common Causes of P013A 2015 GMC Sierra
- Faulty oxygen sensor
- Wiring or connector issues
- Exhaust leaks
- Malfunctioning engine control module (ECM)
- Contaminated fuel affecting air-fuel mixture
Symptoms of P013A 2015 GMC Sierra
- Rough idling
- Hesitation during acceleration
- Decreased fuel efficiency
- Check Engine Light illuminated
- Failed emissions test
How to Fix P013A 2015 GMC Sierra
- Use an OBD-II scanner to confirm the P013A code and identify the specific oxygen sensor causing the issue.
- Inspect the oxygen sensor wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Check for exhaust leaks near the oxygen sensor and repair any leaks found.
- Replace the Bank 1 Sensor 2 oxygen sensor with a new, OEM-quality sensor.
- Clear the trouble code and perform a test drive to ensure the issue has been resolved.
Cost to Fix P013A 2015 GMC Sierra
The typical repair costs for addressing a P013A code on a 2015 GMC Sierra can range from $200 to $500, including parts and labor. However, specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
Tech Notes for P013A 2015 GMC Sierra
User Submitted Video
Need more information about the P013A 2015 GMC Sierra code?
Need more information on how to fix the P013A 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013A 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013A 2015 GMC Sierra Code
No Frequently Asked Questions about P013A 2015 GMC Sierra Code found.
Discuss the causes and fixes for P013A 2015 GMC Sierra OBDII Code
Code P013A 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.