P0139 2010 Nissan Altima Sedan Code - HO2S12 Slow Response
Quick Answer
The P0139 diagnostic trouble code (DTC) for a 2010 Nissan Altima Sedan refers to a slow response from the downstream oxygen sensor (HO2S12). Common causes include Faulty downstream oxygen sensor (HO2S12), Wiring or connector issues, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0139 2010 Nissan Altima Sedan indicates HO2S12 Slow Response.
- Common causes
- Common causes include Faulty downstream oxygen sensor (HO2S12), Wiring or connector issues, Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0139 2010 Nissan Altima Sedan Description
The P0139 diagnostic trouble code (DTC) for a 2010 Nissan Altima Sedan refers to a slow response from the downstream oxygen sensor (HO2S12). The oxygen sensor is a crucial component of the vehicle's emissions control system, responsible for monitoring the oxygen levels in the exhaust gases. The downstream oxygen sensor specifically measures the oxygen content after the catalytic converter to ensure its proper functioning.
Common Causes of P0139 2010 Nissan Altima Sedan
- Faulty downstream oxygen sensor (HO2S12)
- Wiring or connector issues
- Exhaust leaks near the sensor
- Malfunctioning ECM
- Contaminated sensor due to oil or coolant leaks
Symptoms of P0139 2010 Nissan Altima Sedan
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Illuminated check engine light
- Failed emissions test
How to Fix P0139 2010 Nissan Altima Sedan
- Diagnose the issue by using a scan tool to monitor the oxygen sensor's response time.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
- Check for exhaust leaks near the sensor and repair them to prevent false readings.
- Replace the downstream oxygen sensor (HO2S12) if it is found to be faulty.
- Clear the DTC and perform a test drive to ensure the issue has been resolved.
Cost to Fix P0139 2010 Nissan Altima Sedan
The typical repair costs for addressing a P0139 code on a 2010 Nissan Altima Sedan can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically falling between $80 and $150. Factors such as location, vehicle make and model, and engine type can also influence the final repair costs. It is recommended to obtain quotes from local auto repair shops for a more accurate estimate.
Tech Notes for P0139 2010 Nissan Altima Sedan
When is the Code Detected?
Need more information about the P0139 2010 Nissan Altima Sedan code?
Need more information on how to fix the P0139 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0139 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0139 2010 Nissan Altima Sedan Code
1. What does OBDII code P0139 on a 2010 Nissan Altima Sedan mean?
This code, HO2S12 Slow Response, indicates a slow response from the downstream oxygen sensor (HO2S12) in bank 1 sensor 2 in the exhaust system of the vehicle.
2. What are the common symptoms of OBDII code P0139 in a 2010 Nissan Altima Sedan?
Common symptoms include decreased fuel efficiency, rough idling, engine hesitation, and potential stalling.
3. What are the possible causes of OBDII code P0139 in a 2010 Nissan Altima Sedan?
Potential causes include a faulty oxygen sensor, wiring issues in the oxygen sensor circuit, exhaust leaks, or issues with the engine's air-fuel ratio.
4. How serious is OBDII code P0139 in a 2010 Nissan Altima Sedan?
While the vehicle may still be operable with this code, ignoring it can lead to decreased fuel efficiency and potential damage to other components over time.
5. Can I drive my 2010 Nissan Altima Sedan with OBDII code P0139?
It is generally not recommended to drive the vehicle for an extended period with this code present, as it can impact the engine's performance and fuel efficiency.
6. How can I diagnose OBDII code P0139 in my 2010 Nissan Altima Sedan?
Diagnosis typically involves inspecting the oxygen sensor, checking for wiring issues, and ensuring there are no exhaust leaks affecting sensor performance.
7. How can I repair OBDII code P0139 in my 2010 Nissan Altima Sedan?
Common repairs include replacing the downstream oxygen sensor, repairing any damaged wiring, fixing exhaust leaks, and addressing issues with the air-fuel ratio.
8. Will resetting the OBDII code P0139 on my 2010 Nissan Altima Sedan make it go away?
Resetting the code may temporarily clear the warning light, but if the underlying issue is not resolved, the code is likely to reappear after driving the vehicle for a while.
9. Can a DIY enthusiast fix OBDII code P0139 in a 2010 Nissan Altima Sedan?
Depending on the skill level and tools available, some DIY enthusiasts may be able to replace the oxygen sensor or address wiring issues related to this code.
10. How much does it cost to repair OBDII code P0139 in a 2010 Nissan Altima Sedan?
Costs for repairing this code can vary significantly based on the specific issue, but expect to pay for parts like the oxygen sensor and potential labor costs if professional help is needed.
Discuss the causes and fixes for P0139 2010 Nissan Altima Sedan OBDII Code
Code P0139 2010 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.