P0139 2010 Ford Fusion Code - O2 Sensor Circuit Slow Response Bank 1 Sensor 2
Quick Answer
The P0139 diagnostic trouble code (DTC) for a 2010 Ford Fusion indicates an issue with the O2 sensor circuit having a slow response on bank 1 sensor 2. Common causes include Faulty O2 sensor, Wiring or connector issues, Exhaust leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0139 2010 Ford Fusion indicates O2 Sensor Circuit Slow Response Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty O2 sensor, Wiring or connector issues, Exhaust leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0139 2010 Ford Fusion Description
The P0139 diagnostic trouble code (DTC) for a 2010 Ford Fusion indicates an issue with the O2 sensor circuit having a slow response on bank 1 sensor 2. This sensor is responsible for monitoring the oxygen levels in the exhaust gases after they have passed through the catalytic converter. The slow response could indicate a problem with the sensor itself or with the wiring and connections associated with it.
Common Causes of P0139 2010 Ford Fusion
- Faulty O2 sensor
- Wiring or connector issues
- Exhaust leaks
- Vacuum leaks
- Exhaust system damage
Symptoms of P0139 2010 Ford Fusion
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Check Engine Light illuminated
- Failed emissions test
How to Fix P0139 2010 Ford Fusion
- Diagnose the O2 sensor using a scan tool to confirm the slow response on bank 1 sensor 2.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
- Check for exhaust leaks and repair them to ensure proper sensor function.
- Replace the O2 sensor if it is determined to be faulty.
- Clear the DTC and perform a test drive to verify the repair.
Cost to Fix P0139 2010 Ford Fusion
The cost of repairing the O2 sensor circuit slow response issue on a 2010 Ford Fusion can vary depending on the specific cause of the problem. In general, the cost of a new O2 sensor can range from $50 to $200, while labor costs can range from $100 to $200. Overall, the total repair cost could be between $150 and $400. It's important to note that prices can vary based on location, the specific shop or dealership, and the type of O2 sensor needed for the vehicle. It's recommended to get a detailed quote from a trusted mechanic before proceeding with the repair.
Tech Notes for P0139 2010 Ford Fusion
When is the Code Detected?
Need more information about the P0139 2010 Ford Fusion code?
Need more information on how to fix the P0139 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0139 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0139 2010 Ford Fusion Code
1. What does the OBDII code P0139 mean for a 2010 Ford Fusion?
The P0139 code indicates that the oxygen sensor in Bank 1 Sensor 2 is taking too long to respond to changes in the air-fuel mixture, suggesting a slow response time.
2. What are the common symptoms of code P0139 in a 2010 Ford Fusion?
Symptoms may include a check engine light, reduced fuel efficiency, poor engine performance, or a noticeable delay in throttle response.
3. What causes the P0139 code to appear on a 2010 Ford Fusion?
Common causes include a failing downstream O2 sensor, exhaust leaks, a clogged catalytic converter, or wiring issues like damaged or corroded connections.
4. Which oxygen sensor is affected by the P0139 code on a 2010 Ford Fusion?
The P0139 code refers to the downstream oxygen sensor (Sensor 2) on Bank 1, which monitors the efficiency of the catalytic converter.
5. Can a dirty air filter cause the P0139 code on a 2010 Ford Fusion?
While unlikely, a dirty air filter can indirectly affect air-fuel mixture and sensor performance, potentially contributing to the code under certain conditions.
6. How can I diagnose the P0139 code on a 2010 Ford Fusion?
Diagnosis involves inspecting the downstream O2 sensor and its wiring, checking for exhaust leaks, and monitoring live data with a scan tool to confirm the sensor's response time.
7. Can I drive my 2010 Ford Fusion with the P0139 code?
Driving with the P0139 code is possible, but it’s not recommended as it may lead to reduced fuel efficiency, poor performance, and potential damage to the catalytic converter over time.
8. How do you fix the P0139 code on a 2010 Ford Fusion?
Repairs may include replacing the downstream O2 sensor, repairing damaged wiring, fixing exhaust leaks, or addressing issues with the catalytic converter.
9. How much does it cost to repair the P0139 code on a 2010 Ford Fusion?
Replacing the O2 sensor typically costs $150–$300, including parts and labor. Additional repairs, like fixing exhaust leaks or replacing the catalytic converter, can increase costs.
10. Can a faulty catalytic converter trigger the P0139 code on a 2010 Ford Fusion?
Yes, a clogged or failing catalytic converter can cause the downstream O2 sensor to respond more slowly, leading to the P0139 code.
Discuss the causes and fixes for P0139 2010 Ford Fusion OBDII Code
Code P0139 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.