P0139 2009 Ford Fusion Code - O2 Sensor Circuit Slow Response Bank 1 Sensor 2
Quick Answer
The P0139 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates that there is a slow response from the oxygen sensor located in Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Wiring issues (corrosion, damage), Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0139 2009 Ford Fusion indicates O2 Sensor Circuit Slow Response Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring issues (corrosion, damage), Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0139 2009 Ford Fusion Description
The P0139 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates that there is a slow response from the oxygen sensor located in Bank 1 Sensor 2. This sensor is responsible for monitoring the oxygen levels in the exhaust gases after they have passed through the catalytic converter. The slow response can be caused by a variety of issues, including a malfunctioning sensor, wiring problems, or issues with the engine's air-fuel mixture.
Common Causes of P0139 2009 Ford Fusion
- Faulty oxygen sensor
- Wiring issues (corrosion, damage)
- Exhaust leaks near the sensor
- Engine vacuum leaks
- Issues with the catalytic converter
Symptoms of P0139 2009 Ford Fusion
- Decreased fuel efficiency
- Rough idling or stalling
- Check Engine Light illuminated
- Poor acceleration
- Increased emissions
How to Fix P0139 2009 Ford Fusion
- Begin by diagnosing the specific cause of the slow response from the oxygen sensor using a scan tool to monitor sensor data.
- Inspect the wiring harness connected to the oxygen sensor for any signs of damage or corrosion. Repair or replace as necessary.
- Check for exhaust leaks near the sensor and repair any leaks found.
- Test the oxygen sensor itself using a multimeter to ensure it is functioning correctly. Replace the sensor if it is faulty.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0139 2009 Ford Fusion
The cost of repairing a P0139 code on a 2009 Ford Fusion can vary depending on the specific cause of the issue. Typically, the cost of replacing an oxygen sensor can range from $100 to $250, including parts and labor. However, if additional repairs or replacements are needed, such as fixing wiring issues or addressing exhaust leaks, the cost could increase. It's recommended to consult with a trusted mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates and diagnostic fees can vary based on location and the type of repair facility.
Tech Notes for P0139 2009 Ford Fusion
When is the Code Detected?
Need more information about the P0139 2009 Ford Fusion code?
Need more information on how to fix the P0139 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0139 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0139 2009 Ford Fusion Code
What does the OBDII code P0139 mean on a 2009 Ford Fusion?
Code P0139 on a 2009 Ford Fusion indicates that the O2 sensor in Bank 1, Sensor 2 has a slower response time than expected, implying issues in the efficiency of the catalytic converter or the sensor's performance.
What are common symptoms of code P0139 in a 2009 Ford Fusion?
Symptoms of code P0139 may include a check engine light, higher fuel consumption, rough idling, and a possible sulfur or rotten egg smell from the exhaust.
What causes a P0139 code in a 2009 Ford Fusion?
Possible causes for a P0139 code include a faulty oxygen sensor, exhaust leaks near the sensor, issues with the wiring or connector for the oxygen sensor, or a malfunctioning catalytic converter.
How can I diagnose the cause of code P0139 in my 2009 Ford Fusion?
To diagnose code P0139, start by inspecting the oxygen sensor and its wiring for any visible damage or disconnections. Use an OBDII scanner to check the sensor's voltage readings. It's also advisable to check for exhaust leaks, which can affect sensor readings.
What is the repair process for addressing code P0139 on a 2009 Ford Fusion?
Repairing code P0139 typically involves replacing the faulty O2 sensor. If the sensor and wiring are intact, further investigation into the exhaust system and catalytic converter may be necessary.
Can driving my 2009 Ford Fusion with code P0139 cause further damage?
Yes, driving with code P0139 can lead to more significant issues like damage to the catalytic converter or poor engine performance, which could lead to increased emissions and fuel consumption.
Is it necessary to replace the catalytic converter when dealing with code P0139 on a 2009 Ford Fusion?
Not necessarily. You should first replace the O2 sensor and check if the code clears. If the problem persists, further diagnostics on the catalytic converter may be required.
How much does it cost to fix code P0139 in a 2009 Ford Fusion?
The cost primarily depends on whether you need to replace the O2 sensor or the catalytic converter. An O2 sensor replacement can cost between $200 and $300, whereas a catalytic converter replacement can be significantly higher, potentially over $1000.
Discuss the causes and fixes for P0139 2009 Ford Fusion OBDII Code
Code P0139 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.