P0139 2006 Ford Fusion Code - O2 Sensor Circuit Slow Response Bank 1 Sensor 2
Quick Answer
The P0139 diagnostic trouble code (DTC) for a 2006 Ford Fusion indicates an issue with the O2 sensor circuit's slow response in Bank 1 Sensor 2. Common causes include Faulty O2 sensor, Damaged wiring or connectors in the O2 sensor circuit, Exhaust leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0139 2006 Ford Fusion indicates O2 Sensor Circuit Slow Response Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty O2 sensor, Damaged wiring or connectors in the O2 sensor circuit, Exhaust leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0139 2006 Ford Fusion Description
The P0139 diagnostic trouble code (DTC) for a 2006 Ford Fusion indicates an issue with the O2 sensor circuit's slow response in Bank 1 Sensor 2. The O2 sensor, also known as the oxygen sensor, plays a crucial role in monitoring the oxygen levels in the exhaust gases to ensure the proper air-fuel ratio for combustion in the engine. Bank 1 refers to the side of the engine where the number 1 cylinder is located, while Sensor 2 indicates that it is the downstream sensor located after the catalytic converter.
Common Causes of P0139 2006 Ford Fusion
- Faulty O2 sensor
- Damaged wiring or connectors in the O2 sensor circuit
- Exhaust leaks
- Issues with the ECM
- Contaminated or poor-quality fuel
Symptoms of P0139 2006 Ford Fusion
- Decreased fuel efficiency
- Rough idling or stalling
- Check Engine Light illuminated
- Poor engine performance
- Failed emissions test
How to Fix P0139 2006 Ford Fusion
- Use an OBD-II scanner to confirm the P0139 code and identify the specific O2 sensor causing the issue.
- Inspect the O2 sensor wiring and connectors for damage or corrosion. Repair or replace as needed.
- Check for exhaust leaks and repair any leaks found in the exhaust system.
- Replace the faulty O2 sensor if it is determined to be the cause of the slow response.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0139 2006 Ford Fusion
The typical repair costs for addressing a P0139 code on a 2006 Ford Fusion can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. Rates may be higher at dealerships or in metropolitan areas, while independent shops often charge less. For a more precise estimate, it's advisable to check local rates and consult with a trusted mechanic.
Tech Notes for P0139 2006 Ford Fusion
When is the Code Detected?
Need more information about the P0139 2006 Ford Fusion code?
Need more information on how to fix the P0139 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0139 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0139 2006 Ford Fusion Code
1. What does the OBDII code P0139 on a 2006 Ford Fusion indicate?
The P0139 code signifies that the Oxygen Sensor (O2) in Bank 1, Sensor 2 has a slower than normal response time to changes in fuel mixture, indicating potential issues with the sensor or its circuit.
2. Where is Bank 1 Sensor 2 located on a 2006 Ford Fusion?
Bank 1 refers to the side of the engine with the first cylinder. Sensor 2 is the downstream oxygen sensor located after the catalytic converter.
3. What are common symptoms of the P0139 code in a 2006 Ford Fusion?
Symptoms include a check engine light, poor fuel economy, rough engine idle, and sometimes a noticeable drop in engine performance.
4. What could cause the P0139 code to appear on a 2006 Ford Fusion?
Common causes include a faulty oxygen sensor, exhaust leaks near the sensor, damaged or corroded wiring, or problems with the engine's fuel management system.
5. How can I fix the P0139 code on a 2006 Ford Fusion?
Repair options include replacing the oxygen sensor, repairing any leaks in the exhaust system, checking and repairing sensor wiring, and ensuring the fuel system is functioning properly.
6. Is it necessary to replace the O2 sensor immediately if a P0139 code appears?
While the vehicle may still run, it is advisable to address the issue as soon as possible to avoid potential damage to the catalytic converter and to maintain optimal fuel efficiency.
7. How do I confirm that the O2 sensor is the problem when diagnosing code P0139?
Verification can be done using an OBDII scanner to monitor the sensor's voltage output. If the sensor does not respond quickly or adequately to changes in exhaust gas composition, it likely needs replacement.
8. Can driving with a P0139 code damage my 2006 Ford Fusion?
Continuing to drive with this issue can lead to inefficient fuel consumption, higher emissions, and potentially damaging the catalytic converter, leading to more expensive repairs.
9. What tools are required to diagnose and fix a P0139 code?
Tools needed may include an OBDII scanner, digital multimeter, and basic hand tools. For sensor replacement, a specific O2 sensor socket may also be necessary.
Discuss the causes and fixes for P0139 2006 Ford Fusion OBDII Code
Code P0139 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.