P0138 2018 Toyota RAV4 Code - Oxygen Sensor Circuit High Voltage Bank 1 Sensor 2
Quick Answer
The P0138 code for a 2018 Toyota RAV4 specifically refers to an Oxygen Sensor Circuit High Voltage Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Wiring issues such as a short or open circuit, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0138 2018 Toyota RAV4 indicates Oxygen Sensor Circuit High Voltage Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring issues such as a short or open circuit, Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0138 2018 Toyota RAV4 Description
The P0138 code for a 2018 Toyota RAV4 specifically refers to an Oxygen Sensor Circuit High Voltage Bank 1 Sensor 2. This means that the oxygen sensor located after the catalytic converter in Bank 1 is sending a signal indicating a higher than normal voltage to the Engine Control Module (ECM). The oxygen sensor is responsible for measuring the amount of oxygen in the exhaust gases and providing feedback to the ECM to ensure the proper air-fuel mixture for combustion. A high voltage reading from the sensor can be caused by a variety of factors, including issues with the sensor itself, wiring problems, or even underlying engine issues.
Common Causes of P0138 2018 Toyota RAV4
- Faulty oxygen sensor
- Wiring issues such as a short or open circuit
- Exhaust leaks near the sensor
- Engine running rich due to issues with the fuel system
- ECM malfunction
Symptoms of P0138 2018 Toyota RAV4
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Check Engine Light illuminated
- Failed emissions test
How to Fix P0138 2018 Toyota RAV4
- Begin by using an OBD-II scanner to confirm the P0138 code and ensure it is related to the Bank 1 Sensor 2 oxygen sensor.
- Inspect the wiring harness and connectors leading to the oxygen sensor for any signs of damage or corrosion. Repair or replace as necessary.
- Test the oxygen sensor using a multimeter to determine if it is functioning properly. Replace the sensor if it is faulty.
- Clear the error codes with the OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
- If the code persists, further diagnostics may be required to identify any underlying engine issues that may be affecting the oxygen sensor.
Cost to Fix P0138 2018 Toyota RAV4
The cost estimate for repairing a P0138 code on a 2018 Toyota RAV4 can vary depending on the specific cause of the issue. On average, replacing an oxygen sensor can cost between $200 and $300 for parts and labor. However, if wiring repairs or other components need to be replaced, the cost could be higher. It is recommended to consult with a trusted mechanic or auto repair shop to get a more accurate estimate based on the specific diagnosis and repair needed. Keep in mind that labor rates can vary, with rates typically ranging between $80 and $150 per hour.
Tech Notes for P0138 2018 Toyota RAV4
Need more information about the P0138 2018 Toyota RAV4 code?
Need more information on how to fix the P0138 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0138 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0138 2018 Toyota RAV4 Code
1. What does the OBDII code P0138 mean on a 2018 Toyota RAV4?
P0138 indicates that the oxygen sensor on Bank 1 Sensor 2 is detecting a voltage higher than the expected range, suggesting a potential issue in the sensor circuit or related components.
2. What are the symptoms of code P0138 in a 2018 Toyota RAV4?
Common symptoms include the check engine light turning on, poor fuel economy, rough idling, or a noticeable drop in engine performance.
3. What causes the P0138 code on a 2018 Toyota RAV4?
Possible causes include a faulty oxygen sensor (Bank 1 Sensor 2), damaged wiring or connections in the sensor circuit, a short to voltage, or issues with the vehicle's catalytic converter.
4. Can a faulty oxygen sensor trigger the P0138 code on a Toyota RAV4?
Yes, a malfunctioning oxygen sensor is one of the most common reasons for code P0138 to appear.
5. How do I diagnose the P0138 code on my 2018 Toyota RAV4?
Start by inspecting the wiring and connectors for damage or corrosion, then test the oxygen sensor for proper voltage readings using a multimeter. A scan tool can also help monitor live data.
6. Can I drive my 2018 Toyota RAV4 with the P0138 code?
Driving with this code is not recommended, as it can lead to increased emissions, reduced fuel efficiency, and potential damage to the catalytic converter.
7. How much does it cost to fix the P0138 code on a Toyota RAV4?
The repair cost depends on the root cause. Replacing an oxygen sensor typically costs $150-$300, while wiring repairs or catalytic converter replacements can be more expensive.
8. Does a dirty air filter cause the P0138 code on a 2018 Toyota RAV4?
No, a dirty air filter is unlikely to cause this code. P0138 is specifically related to the oxygen sensor circuit and its voltage readings.
9. How do I reset the P0138 code on my 2018 Toyota RAV4?
After fixing the issue, you can reset the code using an OBDII scanner, or it may clear itself after several drive cycles if the problem is resolved.
10. Could a bad catalytic converter cause the P0138 code on a Toyota RAV4?
Yes, a failing catalytic converter can lead to abnormal oxygen sensor readings, which may trigger the P0138 code.
Discuss the causes and fixes for P0138 2018 Toyota RAV4 OBDII Code
Code P0138 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.