Engine-CodesNissan – P0137 2010 Nissan Rogue

P0137 2010 Nissan Rogue Code - Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2

Quick Answer

The P0137 code for a 2010 Nissan Rogue indicates a problem with the Heated Oxygen Sensor (HO2S) circuit having low voltage for Bank 1 Sensor 2. Common causes include Faulty Heated Oxygen Sensor (HO2S), Damaged wiring or connectors in the sensor circuit, Vacuum leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0137 2010 Nissan Rogue indicates Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2.
Common causes
Common causes include Faulty Heated Oxygen Sensor (HO2S), Damaged wiring or connectors in the sensor circuit, Vacuum leaks.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 16, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0137 2010 Nissan Rogue Description

The P0137 code for a 2010 Nissan Rogue indicates a problem with the Heated Oxygen Sensor (HO2S) circuit having low voltage for Bank 1 Sensor 2. The HO2S is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. Bank 1 Sensor 2 specifically refers to the sensor located downstream of the catalytic converter on the side of the engine where cylinder 1 is located.

OBDII Code P0137 2010 Nissan Rogue - Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2
P0137 2010 Nissan Rogue Code - Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2

Common Causes of P0137 2010 Nissan Rogue

  1. Faulty Heated Oxygen Sensor (HO2S)
  2. Damaged wiring or connectors in the sensor circuit
  3. Vacuum leaks
  4. Exhaust system leaks
  5. ECM issues

Symptoms of P0137 2010 Nissan Rogue

  1. Decreased fuel efficiency
  2. Rough idling or stalling
  3. Poor acceleration
  4. Check Engine Light illuminated
  5. Failed emissions test

How to Fix P0137 2010 Nissan Rogue

  1. Begin by diagnosing the specific cause of the low voltage reading, which may involve using a scan tool to monitor the sensor's output and checking the wiring and connectors for any damage.
  2. If the issue is with the HO2S itself, replace Bank 1 Sensor 2 with a new sensor compatible with the Nissan Rogue.
  3. Repair any damaged wiring or connectors in the sensor circuit to ensure proper electrical connections.
  4. Inspect for and repair any vacuum leaks or exhaust system leaks that could be affecting the sensor's readings.
  5. Clear the diagnostic trouble codes from the ECM and perform a test drive to verify that the issue has been resolved.

Cost to Fix P0137 2010 Nissan Rogue

The typical repair costs for addressing a P0137 code on a 2010 Nissan Rogue can vary depending on the specific cause of the issue. Replacement HO2S sensors can range from $50 to $200, while labor costs can range from $100 to $300. Overall, the total repair cost could be between $150 and $500. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.

Tech Notes for P0137 2010 Nissan Rogue

Replacing the Rear Heated Oxygen Sensor Bank 1 usually takes care of the problem.

When is the Code Detected?

The P0137 code is set when the Engine Control Module (ECM) detects that the rear O2 sensor signal voltage remains excessively low for an extended period of time.

Need more information about the P0137 2010 Nissan Rogue code?

Need more information on how to fix the P0137 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0137 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0137 2010 Nissan Rogue Code

1. What does the OBDII code P0137 mean on a 2010 Nissan Rogue?

The code P0137 indicates a potential issue with the Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2 in the vehicle's exhaust system.

2. What are the common symptoms of a P0137 code in a Nissan Rogue?

Common symptoms of a P0137 code may include poor fuel economy, rough idling, decreased engine performance, and an illuminated check engine light on the dashboard.

3. What are the possible causes of a P0137 code in a 2010 Nissan Rogue?

Potential causes of a P0137 code can include a faulty oxygen sensor, damaged wiring or connectors in the oxygen sensor circuit, exhaust system leaks, or issues with the engine's fuel mixture.

4. How can I diagnose a P0137 code on my 2010 Nissan Rogue?

Diagnosing a P0137 code typically involves using an OBDII scanner to read the code, inspecting the oxygen sensor and its wiring for damage, checking for exhaust leaks, and testing the sensor's voltage output.

5. Can I continue driving my Nissan Rogue with a P0137 code?

While it may be possible to drive the vehicle with a P0137 code, it is not recommended as it can lead to decreased fuel efficiency and potential long-term damage to the engine and catalytic converter.

6. What repairs are commonly needed to fix a P0137 code in a Nissan Rogue?

Common repairs for a P0137 code may include replacing the Bank 1 Sensor 2 oxygen sensor, repairing damaged wiring or connectors, fixing exhaust leaks, and resetting the check engine light.

7. How much does it typically cost to repair a P0137 code on a 2010 Nissan Rogue?

The cost of repairing a P0137 code can vary depending on the specific issue causing the code, but it may range from $100 to $300 for parts and labor.

8. Can I reset the check engine light after fixing a P0137 code on my Nissan Rogue?

After repairing the issue causing the P0137 code, you can reset the check engine light using an OBDII scanner or by disconnecting the car's battery for a few minutes.

9. How often should the oxygen sensors be replaced in a 2010 Nissan Rogue?

Oxygen sensors typically last between 50,000 to 100,000 miles, but it is recommended to follow the manufacturer's maintenance schedule for specific replacement intervals.

10. Is it possible to prevent a P0137 code from occurring in my Nissan Rogue?

To help prevent a P0137 code, it's essential to perform regular maintenance on the vehicle, including checking the oxygen sensors during routine inspections and addressing any issues promptly.

Discuss the causes and fixes for P0137 2010 Nissan Rogue OBDII Code

Code P0137 2010 Nissan Rogue comments

No comments found for this page.