P0137 2010 Ford Fusion Code - O2 Sensor Circuit Low Voltage Bank 1 Sensor 2
Quick Answer
The P0137 code for a 2010 Ford Fusion refers to the O2 sensor circuit having low voltage on Bank 1 Sensor 2. Common causes include Faulty O2 sensor, Wiring or connector issues, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0137 2010 Ford Fusion indicates O2 Sensor Circuit Low Voltage Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty O2 sensor, Wiring or connector issues, Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0137 2010 Ford Fusion Description
The P0137 code for a 2010 Ford Fusion refers to the O2 sensor circuit having low voltage on Bank 1 Sensor 2. This means that the downstream oxygen sensor in the exhaust system is not operating within the expected voltage range. The O2 sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. When the voltage from the sensor is too low, it can lead to incorrect fuel trim adjustments, reduced engine performance, and increased emissions.
Common Causes of P0137 2010 Ford Fusion
- Faulty O2 sensor
- Wiring or connector issues
- Exhaust leaks near the sensor
- Vacuum leaks in the intake system
- ECM software issues
Symptoms of P0137 2010 Ford Fusion
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Check Engine Light illuminated
- Failed emissions test
How to Fix P0137 2010 Ford Fusion
- Use an OBD-II scanner to confirm the P0137 code and pinpoint the specific sensor location.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Check for exhaust leaks near the sensor and repair them to prevent false readings.
- Test the O2 sensor's voltage output and replace it if it is outside of the manufacturer's specifications.
- Clear the code with the scanner and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0137 2010 Ford Fusion
The cost of repairing a P0137 code on a 2010 Ford Fusion can vary depending on the cause of the issue. Typically, the cost of a new O2 sensor can range from $50 to $200, while labor costs for the repair can range from $100 to $300. Additional costs may include diagnostic fees and any necessary parts or materials. It is essential to consult with a qualified mechanic or repair shop to get an accurate estimate based on the specific circumstances of the vehicle.
Tech Notes for P0137 2010 Ford Fusion
When is the Code Detected?
Need more information about the P0137 2010 Ford Fusion code?
Need more information on how to fix the P0137 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0137 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0137 2010 Ford Fusion Code
1. What does the OBDII code P0137 on a 2010 Ford Fusion mean?
The P0137 code indicates that the O2 sensor circuit for Bank 1 Sensor 2 is registering low voltage.
2. What are the common symptoms of O2 Sensor Circuit Low Voltage Bank 1 Sensor 2 issue in a 2010 Ford Fusion?
Common symptoms include poor fuel economy, rough idling, engine hesitation, and possible stalling.
3. What are the possible causes of the P0137 code in a 2010 Ford Fusion?
Possible causes include a faulty O2 sensor, damaged wiring or connectors, exhaust leaks, or issues with the engine's fuel and ignition systems.
4. How can I diagnose the O2 Sensor Circuit Low Voltage issue in my 2010 Ford Fusion?
You can diagnose this issue by using a scan tool to read the trouble codes, inspecting the O2 sensor and its wiring, checking for exhaust leaks, and testing the sensor's voltage output.
5. Can I continue driving my 2010 Ford Fusion with the P0137 code?
It's not recommended to drive for an extended period with this code, as it can lead to decreased fuel efficiency and potential damage to the engine over time.
6. How do I repair the O2 Sensor Circuit Low Voltage Bank 1 Sensor 2 problem in my 2010 Ford Fusion?
Repair involves replacing the faulty O2 sensor, repairing damaged wiring, fixing exhaust leaks, or addressing any underlying issues in the fuel and ignition systems.
7. Is it possible to reset the P0137 code in a 2010 Ford Fusion without fixing the underlying issue?
While you can clear the code with a scan tool, it will likely reappear if the underlying problem is not addressed.
8. How much does it typically cost to fix the O2 Sensor Circuit Low Voltage issue in a 2010 Ford Fusion?
The cost can vary depending on the exact cause of the problem, but it can range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast replace the O2 sensor in a 2010 Ford Fusion to fix the P0137 code?
Yes, replacing the O2 sensor is a relatively straightforward task for those with basic mechanical skills and the right tools.
10. How often should the O2 sensors be replaced in a 2010 Ford Fusion for preventive maintenance?
O2 sensors typically last around 60,000 to 90,000 miles, so it's advisable to replace them within this mileage range as part of regular maintenance to avoid issues like the P0137 code.
Discuss the causes and fixes for P0137 2010 Ford Fusion OBDII Code
Code P0137 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.