P0137 2009 Ford Fusion Code - O2 Sensor Circuit Low Voltage Bank 1 Sensor 2
Quick Answer
The P0137 diagnostic trouble code (DTC) indicates that the O2 sensor for Bank 1 Sensor 2 is reporting a low voltage condition. Common causes include Faulty O2 sensor, Wiring or connector issues, Exhaust leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0137 2009 Ford Fusion indicates O2 Sensor Circuit Low Voltage Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty O2 sensor, Wiring or connector issues, Exhaust leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0137 2009 Ford Fusion Description
The P0137 diagnostic trouble code (DTC) indicates that the O2 sensor for Bank 1 Sensor 2 is reporting a low voltage condition. This sensor is responsible for monitoring the oxygen content of the exhaust gases after they have passed through the catalytic converter. The voltage signal from this sensor helps the engine control module (ECM) adjust the air-fuel mixture for optimal combustion. A low voltage reading can indicate a problem with the sensor itself, the wiring, or the catalytic converter. If left unresolved, this issue can lead to decreased fuel efficiency, increased emissions, and potential damage to the catalytic converter.
Common Causes of P0137 2009 Ford Fusion
- Faulty O2 sensor
- Wiring or connector issues
- Exhaust leaks
- Catalytic converter malfunction
- ECM or engine control module issues
Symptoms of P0137 2009 Ford Fusion
- Decreased fuel efficiency
- Rough idling or stalling
- Check Engine Light illuminated
- Failed emissions test
- Engine misfires
How to Fix P0137 2009 Ford Fusion
- Perform a visual inspection of the O2 sensor and its wiring for any visible damage or corrosion.
- Use a multimeter to test the voltage output of the O2 sensor.
- Replace the O2 sensor if it is determined to be faulty.
- Repair any damaged wiring or connectors.
- Check the catalytic converter for proper operation and replace if necessary.
Cost to Fix P0137 2009 Ford Fusion
The cost of repairing a P0137 code can vary depending on the specific cause of the issue. Generally, the cost of a new O2 sensor can range from $50 to $200, while labor costs can range from $100 to $200. In total, the repair for this issue could cost anywhere from $150 to $400. It's important to consider additional costs for diagnostic testing and potential repairs to other related components.
Tech Notes for P0137 2009 Ford Fusion
When is the Code Detected?
Need more information about the P0137 2009 Ford Fusion code?
Need more information on how to fix the P0137 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0137 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0137 2009 Ford Fusion Code
1. What does OBDII code P0137 for a 2009 Ford Fusion mean?
- This code indicates a low voltage condition in the O2 sensor circuit of Bank 1 Sensor 2, specifically the downstream sensor on the same side as the number one cylinder.
2. What are the common symptoms of O2 sensor circuit low voltage (P0137) in a 2009 Ford Fusion?
- Common symptoms include poor fuel economy, rough idling, failed emissions test, and the illumination of the check engine light.
3. What can cause the O2 sensor circuit low voltage code (P0137) in a 2009 Ford Fusion?
- Possible causes include a faulty O2 sensor, damaged wiring, exhaust leaks near the sensor, a failing catalytic converter, or issues with the engine's air-fuel mixture.
4. How can I diagnose the O2 sensor circuit low voltage issue (P0137) in my 2009 Ford Fusion?
- Diagnosing this code typically involves checking the sensor's wiring for damage, inspecting the sensor for physical damage, verifying proper sensor operation, and evaluating the exhaust system for leaks.
5. Can I continue driving my 2009 Ford Fusion with the P0137 OBDII code?
- It is generally not recommended to ignore this code, as it can lead to decreased fuel efficiency and potential damage to the catalytic converter over time.
6. How can I repair the O2 sensor circuit low voltage issue (P0137) in my 2009 Ford Fusion?
- Repair options may include replacing the Bank 1 Sensor 2 oxygen sensor, repairing damaged wiring, fixing exhaust leaks, or addressing underlying issues affecting the air-fuel ratio.
7. Is it possible to reset the OBDII code P0137 in a 2009 Ford Fusion without fixing the underlying issue?
- While clearing the code may temporarily turn off the check engine light, it will not resolve the underlying problem causing the low voltage condition in the O2 sensor circuit.
8. Will a faulty O2 sensor always trigger the P0137 code in a 2009 Ford Fusion?
- While a faulty O2 sensor is a common cause of this code, other factors such as wiring issues, exhaust leaks, or catalytic converter problems can also trigger the P0137 OBDII code.
9. How much does it typically cost to repair the O2 sensor circuit low voltage issue (P0137) in a 2009 Ford Fusion?
- The cost of repair can vary depending on the specific cause of the issue, but generally, replacing the oxygen sensor or addressing wiring problems can range from $100 to $300 or more.
10. Can I fix the O2 sensor circuit low voltage problem (P0137) in my 2009 Ford Fusion myself?
- While some DIY enthusiasts may be able to replace the oxygen sensor or repair wiring themselves, diagnosing and fixing this issue may require specialized tools and expertise, so professional help is often recommended.
Discuss the causes and fixes for P0137 2009 Ford Fusion OBDII Code
Code P0137 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.