P0137 2006 Toyota Highlander Code - Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2
Quick Answer
The P0137 code for a 2006 Toyota Highlander indicates a problem with the Oxygen Sensor Circuit Low Voltage for Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Wiring issues (corrosion, damage), Exhaust leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0137 2006 Toyota Highlander indicates Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring issues (corrosion, damage), Exhaust leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0137 2006 Toyota Highlander Description
The P0137 code for a 2006 Toyota Highlander indicates a problem with the Oxygen Sensor Circuit Low Voltage for Bank 1 Sensor 2. This sensor is located downstream of the catalytic converter and is responsible for monitoring the oxygen levels in the exhaust gases. The Engine Control Module (ECM) uses this information to adjust the air-fuel mixture for optimal combustion.
Common Causes of P0137 2006 Toyota Highlander
- Faulty oxygen sensor
- Wiring issues (corrosion, damage)
- Exhaust leaks
- Faulty catalytic converter
- Engine misfire
Symptoms of P0137 2006 Toyota Highlander
- Decreased fuel efficiency
- Rough idling or stalling
- Check Engine Light illuminated
- Poor acceleration
- Increased emissions
How to Fix P0137 2006 Toyota Highlander
- Diagnose the issue by using a scan tool to read the code and inspect the oxygen sensor and related wiring.
- Replace the Bank 1 Sensor 2 oxygen sensor if it is found to be faulty.
- Check and repair any damaged or corroded wiring connections.
- Inspect the catalytic converter for damage or clogging and replace if necessary.
- Clear the code and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0137 2006 Toyota Highlander
The cost of repairing a P0137 code on a 2006 Toyota Highlander can vary depending on the specific cause of the issue. Typically, the cost of a new oxygen sensor can range from $50 to $200, while the cost of a new catalytic converter can range from $200 to $1000. Labor costs at auto repair shops can range from $80 to $150 per hour. Overall, the total repair cost for this issue could range from $150 to $1000 or more, depending on the extent of the repairs needed. It is recommended to obtain quotes from local auto repair shops to get a more accurate estimate based on your specific situation.
Tech Notes for P0137 2006 Toyota Highlander
When is the Code Detected?
Need more information about the P0137 2006 Toyota Highlander code?
Need more information on how to fix the P0137 2006 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0137 2006 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0137 2006 Toyota Highlander Code
1. What are common symptoms of OBDII code P0137 in a 2006 Toyota Highlander?
- Common symptoms include poor fuel economy, rough idling, and potential issues with the vehicle's emission levels.
2. What does the OBDII code P0137 on a 2006 Toyota Highlander indicate?
- The code P0137 indicates a low voltage condition in the oxygen sensor circuit of Bank 1 Sensor 2 in the vehicle's exhaust system.
3. What are the possible causes of OBDII code P0137 in a 2006 Toyota Highlander?
- Possible causes include a faulty oxygen sensor, wiring issues in the sensor circuit, exhaust leaks, or problems with the engine's fuel system.
4. How can I diagnose the OBDII code P0137 in my 2006 Toyota Highlander?
- Diagnosis typically involves using an OBDII scanner to retrieve the code, visually inspecting the oxygen sensor and related wiring, and conducting voltage tests.
5. Can I drive my 2006 Toyota Highlander with an OBDII code P0137?
- It is not recommended to drive the vehicle with a P0137 code for an extended period as it can lead to decreased fuel efficiency and potential damage to the catalytic converter.
6. How do I repair OBDII code P0137 in my 2006 Toyota Highlander?
- Repair may involve replacing the Bank 1 Sensor 2 oxygen sensor, repairing any damaged wiring, fixing exhaust leaks, or addressing issues in the fuel system.
7. Is it possible to reset the OBDII code P0137 in a 2006 Toyota Highlander without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, the issue causing the code will persist until properly diagnosed and repaired.
8. Can a dirty or clogged air filter trigger the OBDII code P0137 in a 2006 Toyota Highlander?
- While a dirty air filter can affect engine performance, it is not a direct cause of the P0137 code. Focus on checking the oxygen sensor and related components.
9. How long does it typically take to repair OBDII code P0137 in a 2006 Toyota Highlander?
- Repair time can vary based on the exact cause of the code and the availability of parts, but it generally takes a few hours to a day to diagnose and fix the issue.
10. Will fixing the OBDII code P0137 in my 2006 Toyota Highlander improve the vehicle's overall performance?
- Yes, repairing the P0137 code can lead to better fuel efficiency, smoother engine operation, and ensure the vehicle meets emission standards.
Discuss the causes and fixes for P0137 2006 Toyota Highlander OBDII Code
Code P0137 2006 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.