P0136 Mercury Code - Heated Oxygen Sensor Circuit Malfunction Bank 1 Sensor 2
Quick Answer
The P0136 diagnostic trouble code (DTC) for Mercury vehicles indicates a Heated Oxygen Sensor Circuit Malfunction in Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Damaged wiring or connectors, Blown fuse related to the oxygen sensor circuit. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0136 Mercury indicates Heated Oxygen Sensor Circuit Malfunction Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Damaged wiring or connectors, Blown fuse related to the oxygen sensor circuit.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0136 Mercury Description
The P0136 diagnostic trouble code (DTC) for Mercury vehicles indicates a Heated Oxygen Sensor Circuit Malfunction in Bank 1 Sensor 2. This means that there is an issue with the oxygen sensor located downstream from the catalytic converter on the bank 1 side of the engine. The oxygen sensor plays a crucial role in monitoring the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion.
Common Causes of P0136 Mercury
- Faulty oxygen sensor
- Damaged wiring or connectors
- Blown fuse related to the oxygen sensor circuit
- ECM malfunction
- Exhaust leaks near the oxygen sensor
Symptoms of P0136 Mercury
- Decreased fuel efficiency
- Rough idling or stalling
- Hesitation or lack of power during acceleration
- Illuminated check engine light
- Failed emissions test
How to Fix P0136 Mercury
- Begin by using an OBD-II scanner to confirm the P0136 code and identify the specific oxygen sensor causing the issue.
- Inspect the wiring and connectors for any damage or corrosion. Repair or replace as necessary.
- Check the fuse related to the oxygen sensor circuit and replace if blown.
- Test the oxygen sensor using a multimeter to determine if it is functioning correctly. Replace the sensor if it is faulty.
- Clear the DTC with the OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0136 Mercury
The typical repair costs for a P0136 code can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. This estimate includes the price of a new oxygen sensor, wiring repairs, and diagnostic labor. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle model.
Need more information about the P0136 Mercury code?
Need more information on how to fix the P0136 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0136 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0136 Mercury Code
What does the OBDII code P0136 mean for a Mercury?
P0136 indicates a malfunction in the circuit of the heated oxygen sensor (O2 sensor) located in Bank 1, Sensor 2, which monitors the efficiency of the catalytic converter.
What are the common symptoms of code P0136 in a Mercury?
Common symptoms include an illuminated check engine light, decreased fuel efficiency, rough idling, or failed emissions tests, though some vehicles may show no noticeable symptoms.
What causes the P0136 code to appear in a Mercury?
Possible causes include a faulty O2 sensor, damaged wiring or connectors in the sensor circuit, exhaust leaks, or issues with the vehicle's engine control module (ECM).
How do I diagnose the P0136 code on a Mercury?
Start by inspecting the O2 sensor’s wiring and connectors for damage. Use a scan tool to monitor sensor voltage and test the sensor itself for proper operation. Check for exhaust leaks near the sensor.
Can I drive my Mercury with the P0136 code?
Driving with P0136 is generally safe in the short term, but it can lead to reduced fuel efficiency and potential catalytic converter damage if left unresolved.
How can I fix the P0136 code on my Mercury?
Common fixes include replacing the faulty O2 sensor, repairing damaged wiring or connectors, fixing exhaust leaks, or reprogramming/updating the ECM if needed.
How much does it cost to repair the P0136 code on a Mercury?
Repair costs vary, but replacing an O2 sensor typically costs $150–$400, including parts and labor. Wiring repairs or exhaust fixes may add to the total cost.
Can an exhaust leak trigger the P0136 code on a Mercury?
Yes, an exhaust leak near the O2 sensor can cause incorrect readings and trigger the P0136 code.
Do I need special tools to fix the P0136 code on a Mercury?
Basic tools like a socket set and an O2 sensor socket may be needed. A scan tool or multimeter can help diagnose the issue accurately.
How do I prevent the P0136 code from reoccurring in my Mercury?
Regular maintenance, such as inspecting wiring, fixing exhaust leaks promptly, and replacing sensors as recommended, can help prevent the P0136 code.
Discuss the causes and fixes for P0136 Mercury OBDII Code
Code P0136 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.