Engine-Codes - Isuzu - P0136 Isuzu

P0136 Isuzu Code - HO2S Circuit Sensor 2

- Code Popularity: 5,260 Views
- Repair Importance Level: 2/3
- Repair Difficulty Level: 2/3
Table of contents

|What are the Possible Causes of the Code P0136 Isuzu?

  • Faulty Rear Heated Oxygen Sensor Bank 1
  • Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
  • Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
  • Inappropriate fuel pressure
  • Faulty fuel injectors
  • Intake air leaks may be faulty
  • Exhaust gas leaks

|How to Fix the P0136 Isuzu Code?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Code P0136 Isuzu Tech Notes

Replacing the Rear Heated Oxygen Sensor Bank 1 usually takes care of the problem.

|What is the Cost to Diagnose the Code P0136 Isuzu?

Labor: 1.0

The cost to diagnose the P0136 Isuzu code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Does your car have Safety Recalls? → Check here

|When is the P0136 Isuzu Code Detected?

It takes more time for the sensor to respond between rich and lean than the specified time.

|What are Code P0136 Isuzu Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • High Fuel Consumption
  • Excessive Smoke from Exhaust

|What Does the P0136 Isuzu Code Mean?

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.

HO2S Circuit Sensor 2

|Need more Information on the P0136 Isuzu Code?

Need more information on how to fix the P0136 Isuzu code? Get Access to Factory Service Manuals

|Need Help with the P0136 Isuzu Code?

Get the P0136 Isuzu code diagnosed by a professional: Find a repair shop in your area