P0136 Acura Code - Heated Oxygen Sensor Circuit Malfunction Bank 1 Sensor 2
Quick Answer
The P0136 code for Acura vehicles indicates a Heated Oxygen Sensor Circuit Malfunction in Bank 1 Sensor 2. Common causes include Faulty oxygen sensor, Damaged wiring or connectors in the sensor circuit, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0136 Acura indicates Heated Oxygen Sensor Circuit Malfunction Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty oxygen sensor, Damaged wiring or connectors in the sensor circuit, Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0136 Acura Description
The P0136 code for Acura vehicles indicates a Heated Oxygen Sensor Circuit Malfunction in Bank 1 Sensor 2. This means that there is an issue with the oxygen sensor located downstream (after the catalytic converter) on the side of the engine where cylinder 1 is located. The oxygen sensor plays a crucial role in monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion.
Common Causes of P0136 Acura
- Faulty oxygen sensor
- Damaged wiring or connectors in the sensor circuit
- Exhaust leaks near the sensor
- Issues with the ECM
- Contaminated fuel affecting sensor performance
Symptoms of P0136 Acura
- Decreased fuel efficiency
- Rough idling
- Hesitation during acceleration
- Check Engine Light illuminated
- Increased emissions
How to Fix P0136 Acura
- Begin by locating the Bank 1 Sensor 2 oxygen sensor, typically found after the catalytic converter.
- Inspect the sensor wiring and connectors for any damage or corrosion. Replace if necessary.
- Test the oxygen sensor using a multimeter to check for proper voltage output.
- If the sensor is faulty, replace it with a new OEM sensor.
- Clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0136 Acura
The typical repair costs for a P0136 code can range from $150 to $400, including parts and labor. However, specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate. Keep in mind that using OEM parts may increase the cost of the repair.
Need more information about the P0136 Acura code?
Need more information on how to fix the P0136 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0136 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0136 Acura Code
1. What are the common symptoms of OBDII code P0136 in an Acura?
- Common symptoms include reduced fuel efficiency, rough idling, engine hesitation, and the illumination of the Check Engine Light.
2. What does the OBDII code P0136 in an Acura indicate?
- P0136 indicates a malfunction in the heated oxygen sensor circuit for Bank 1 Sensor 2, which is typically located downstream from the catalytic converter.
3. What are the potential causes of a P0136 code in an Acura?
- Possible causes include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, exhaust leaks, or issues with the engine's fuel system.
4. How can I diagnose a P0136 code in my Acura?
- Diagnosis involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and its wiring for damage, and checking for any exhaust leaks near the sensor.
5. Can I drive my Acura with a P0136 code?
- It is generally safe to drive with a P0136 code, but it is recommended to address the issue promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance.
6. How can I repair a P0136 code in my Acura?
- Repair options may include replacing the Bank 1 Sensor 2 oxygen sensor, repairing damaged wiring or connectors, fixing exhaust leaks, or addressing any underlying issues in the fuel system.
7. Are there any DIY tips for fixing a P0136 code in an Acura?
- DIY enthusiasts with automotive experience can attempt to replace the oxygen sensor themselves using the appropriate tools and following manufacturer guidelines.
8. How much does it cost to fix a P0136 code in an Acura?
- The cost of fixing a P0136 code can vary depending on the root cause of the issue, but it typically ranges from $100 to $300 for parts and labor at a repair shop.
9. Can a P0136 code reset itself in an Acura?
- The Check Engine Light may reset after several drive cycles if the issue causing the P0136 code is resolved. However, it is recommended to diagnose and repair the underlying problem to prevent recurrence.
10. How often does a P0136 code occur in Acura vehicles?
- P0136 codes can occur in Acura vehicles due to various factors, such as aging sensors, environmental conditions, or fuel quality, but they are not extremely common.
Discuss the causes and fixes for P0136 Acura OBDII Code
Code P0136 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.