P0135 2020 Honda CR-V Code - Air/Fuel Ratio Sensor 1 Heater Circuit Malfunction
Quick Answer
The P0135 diagnostic trouble code (DTC) on a 2020 Honda CR-V indicates a malfunction in the Air/Fuel Ratio Sensor 1 Heater Circuit. Common causes include Faulty Air/Fuel Ratio Sensor 1, Damaged wiring or connectors in the heater circuit, Blown fuse related to the sensor heater circuit. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0135 2020 Honda CR-V indicates Air/Fuel Ratio Sensor 1 Heater Circuit Malfunction.
- Common causes
- Common causes include Faulty Air/Fuel Ratio Sensor 1, Damaged wiring or connectors in the heater circuit, Blown fuse related to the sensor heater circuit.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0135 2020 Honda CR-V Description
The P0135 diagnostic trouble code (DTC) on a 2020 Honda CR-V indicates a malfunction in the Air/Fuel Ratio Sensor 1 Heater Circuit. This sensor is responsible for monitoring the oxygen content in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air/fuel mixture for optimal combustion. The heater circuit in the sensor is designed to quickly reach operating temperature to improve sensor accuracy and efficiency.
Common Causes of P0135 2020 Honda CR-V
- Faulty Air/Fuel Ratio Sensor 1
- Damaged wiring or connectors in the heater circuit
- Blown fuse related to the sensor heater circuit
- ECM software issue
- Exposure to extreme temperatures or contaminants causing sensor damage
Symptoms of P0135 2020 Honda CR-V
- Check Engine Light illuminated on the dashboard
- Decreased fuel efficiency
- Rough idling or stalling
- Hesitation or lack of power during acceleration
- Increased emissions
How to Fix P0135 2020 Honda CR-V
- Use an OBD-II scanner to confirm the P0135 code and ensure it is related to the Air/Fuel Ratio Sensor 1 Heater Circuit.
- Inspect the sensor, wiring, and connectors for any visible damage or corrosion.
- Test the sensor heater circuit resistance to determine if it is within the manufacturer's specifications.
- Replace the Air/Fuel Ratio Sensor 1 if it is found to be faulty.
- Clear the DTC and perform a test drive to verify that the issue has been resolved.
Cost to Fix P0135 2020 Honda CR-V
The cost of repairing a P0135 code on a 2020 Honda CR-V can vary depending on the specific cause of the issue. In general, the price range for replacing an Air/Fuel Ratio Sensor 1 and addressing related wiring or fuse issues can range from $200 to $500, including parts and labor. It is recommended to consult with a qualified mechanic or dealership for an accurate estimate based on the vehicle's condition and location. Keep in mind that labor rates and diagnostic fees may vary, so it's advisable to inquire about these costs upfront.
Need more information about the P0135 2020 Honda CR-V code?
Need more information on how to fix the P0135 2020 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0135 2020 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0135 2020 Honda CR-V Code
What does the OBDII code P0135 mean for a 2020 Honda CR-V?
P0135 indicates a malfunction in the heater circuit of the air/fuel ratio sensor 1, which can affect the engine's air-fuel mixture control.
What are common symptoms of the P0135 code?
Common symptoms include poor fuel economy, rough idling, increased emissions, and the check engine light illuminating.
What could cause the P0135 code to trigger?
Possible causes include a faulty air/fuel ratio sensor, damaged wiring or connectors, blown fuses, or issues with the engine control module (ECM).
Can I drive my 2020 Honda CR-V with the P0135 code?
While you can continue to drive the vehicle, it's not recommended due to potential damage to the engine and increased emissions. It's best to diagnose and fix the issue as soon as possible.
How can I diagnose the P0135 code?
Use an OBDII scanner to confirm the code, visually inspect the sensor and wiring for damage, check the fuse for the sensor's heater circuit, and test the sensor's resistance with a multimeter.
What is the typical cost to repair the P0135 code?
Repair costs can vary widely but may range from $100 to $400, depending on whether you need to replace the air/fuel ratio sensor or repair wiring issues.
Are there any temporary fixes for the P0135 code?
A temporary fix might include inspecting and repairing any visible wiring damage or ensuring all connectors are secure. However, a proper diagnosis and repair are recommended for long-term solutions.
How can I prevent the P0135 code from occurring in the future?
Regular vehicle maintenance, including checking the electrical connections and the condition of the sensors, can help prevent issues. Addressing any engine performance problems promptly can also reduce the risk.
Does the P0135 code affect my vehicle's emissions?
Yes, the P0135 code can lead to improper air-fuel mixture adjustments, which may result in increased emissions and potentially cause your vehicle to fail an emissions test.
Discuss the causes and fixes for P0135 2020 Honda CR-V OBDII Code
Code P0135 2020 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.