P0135 2018 GMC Sierra Code - HO2S Heater Performance Bank 1 Sensor 1
Quick Answer
The P0135 diagnostic trouble code (DTC) for a 2018 GMC Sierra specifically refers to the HO2S (Heated Oxygen Sensor) Heater Performance for Bank 1 Sensor 1. Common causes include Faulty oxygen sensor heater element, Wiring or connector issues, Blown fuse related to the oxygen sensor heater circuit. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0135 2018 GMC Sierra indicates HO2S Heater Performance Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty oxygen sensor heater element, Wiring or connector issues, Blown fuse related to the oxygen sensor heater circuit.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0135 2018 GMC Sierra Description
The P0135 diagnostic trouble code (DTC) for a 2018 GMC Sierra specifically refers to the HO2S (Heated Oxygen Sensor) Heater Performance for Bank 1 Sensor 1. This code indicates that there is a problem with the heating element in the oxygen sensor located in the exhaust system before the catalytic converter on the bank 1 side of the engine. The oxygen sensor plays a crucial role in monitoring the oxygen levels in the exhaust gases, which helps the engine control module (ECM) adjust the air-fuel mixture for optimal combustion efficiency.
Common Causes of P0135 2018 GMC Sierra
- Faulty oxygen sensor heater element
- Wiring or connector issues
- Blown fuse related to the oxygen sensor heater circuit
- ECM software or hardware problems
- Exhaust system leaks affecting sensor performance
Symptoms of P0135 2018 GMC Sierra
- Decreased fuel efficiency
- Rough idling or stalling
- Hesitation or lack of power during acceleration
- Illuminated check engine light
- Engine misfires
How to Fix P0135 2018 GMC Sierra
- Begin by diagnosing the specific cause of the P0135 code using an OBD-II scanner to pinpoint the issue with the HO2S heater performance.
- Inspect the wiring and connectors associated with the oxygen sensor for any signs of damage or corrosion. Repair or replace as necessary.
- Check the fuse related to the oxygen sensor heater circuit and replace if blown.
- Test the oxygen sensor heater element for proper functionality and replace the sensor if it is found to be faulty.
- Clear the DTC and perform a test drive to ensure the code does not return, indicating a successful repair.
Cost to Fix P0135 2018 GMC Sierra
The typical repair costs for addressing a P0135 code on a 2018 GMC Sierra can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically falling between $80 and $150. Factors such as location, vehicle make and model, and engine type can also influence repair costs. For a more accurate estimate, it is recommended to consult with local auto repair shops.
Tech Notes for P0135 2018 GMC Sierra
Need more information about the P0135 2018 GMC Sierra code?
Need more information on how to fix the P0135 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0135 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0135 2018 GMC Sierra Code
1. What does the OBDII code P0135 mean on a 2018 GMC Sierra?
P0135 indicates a problem with the heater circuit of the oxygen sensor (HO2S) in Bank 1, Sensor 1, meaning the sensor is not heating up properly to function efficiently.
2. What are the symptoms of code P0135 in a 2018 GMC Sierra?
Common symptoms include an illuminated check engine light, reduced fuel efficiency, difficulty passing emissions tests, and possibly rough idling or poor engine performance.
3. What causes the P0135 code on a 2018 GMC Sierra?
Causes can include a blown fuse, damaged wiring or connectors, a faulty oxygen sensor, or a malfunctioning engine control module (ECM).
4. Where is Bank 1 Sensor 1 located on a 2018 GMC Sierra?
Bank 1 Sensor 1 is the oxygen sensor located upstream (before the catalytic converter) on the side of the engine with cylinder 1.
5. Can I drive my 2018 GMC Sierra with the P0135 code?
While it may still be drivable, ignoring the issue can lead to decreased fuel efficiency and potential damage to the catalytic converter over time.
6. How is the P0135 code diagnosed in a 2018 GMC Sierra?
A mechanic will typically use a scan tool to confirm the code, inspect the sensor wiring and connectors, check for blown fuses, and test the oxygen sensor’s resistance and voltage.
7. How do I fix the P0135 code on my 2018 GMC Sierra?
Common fixes include replacing the faulty oxygen sensor, repairing damaged wiring or connectors, replacing blown fuses, or in rare cases, replacing the ECM.
8. How much does it cost to fix the P0135 code on a 2018 GMC Sierra?
The cost varies, but replacing an oxygen sensor generally ranges from $150 to $400, including parts and labor.
9. Can a dirty air filter cause the P0135 code in a 2018 GMC Sierra?
No, a dirty air filter is unlikely to cause this code, as P0135 specifically relates to the oxygen sensor’s heater circuit, not general airflow issues.
10. Will clearing the P0135 code fix the problem on my 2018 GMC Sierra?
Clearing the code may turn off the check engine light temporarily, but if the underlying issue isn’t resolved, the code will likely return.
Discuss the causes and fixes for P0135 2018 GMC Sierra OBDII Code
Code P0135 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.