P0135 2016 GMC Sierra Code - HO2S Heater Performance Bank 1 Sensor 1
Quick Answer
The P0135 diagnostic trouble code (DTC) for a 2016 GMC Sierra refers to the HO2S (Heated Oxygen Sensor) Heater Performance on Bank 1 Sensor 1. Common causes include Faulty oxygen sensor heater, Damaged wiring or connectors, Blown fuse. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0135 2016 GMC Sierra indicates HO2S Heater Performance Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty oxygen sensor heater, Damaged wiring or connectors, Blown fuse.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0135 2016 GMC Sierra Description
The P0135 diagnostic trouble code (DTC) for a 2016 GMC Sierra refers to the HO2S (Heated Oxygen Sensor) Heater Performance on Bank 1 Sensor 1. This code indicates that there is a malfunction in the heating element of the oxygen sensor located in the exhaust system before the catalytic converter on the side with cylinder 1. The oxygen sensor plays a crucial role in monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion.
Common Causes of P0135 2016 GMC Sierra
- Faulty oxygen sensor heater
- Damaged wiring or connectors
- Blown fuse
- Malfunctioning ECM
- Corrosion or contamination on sensor connectors
Symptoms of P0135 2016 GMC Sierra
- Decreased fuel efficiency
- Rough idling or stalling
- Hesitation during acceleration
- Increased emissions
- Engine misfires
How to Fix P0135 2016 GMC Sierra
- Perform a visual inspection of the oxygen sensor and its wiring for any visible damage.
- Test the oxygen sensor heater circuit using a multimeter to check for continuity and resistance.
- Check the fuse related to the oxygen sensor heater circuit and replace if necessary.
- Inspect the ECM for any signs of malfunction and reprogram or replace if needed.
- Clear the DTC and perform a test drive to ensure the issue has been resolved.
Cost to Fix P0135 2016 GMC Sierra
The typical repair costs for addressing a P0135 code on a 2016 GMC Sierra can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's recommended to obtain quotes from local shops for a more accurate estimate.
Tech Notes for P0135 2016 GMC Sierra
Need more information about the P0135 2016 GMC Sierra code?
Need more information on how to fix the P0135 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0135 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0135 2016 GMC Sierra Code
What does the OBDII code P0135 mean for a 2016 GMC Sierra?
P0135 indicates a malfunction in the heater circuit of the oxygen sensor (HO2S) on Bank 1 Sensor 1, which is responsible for monitoring the air-fuel mixture.
What are the symptoms of code P0135 on a 2016 GMC Sierra?
Symptoms may include the check engine light turning on, poor fuel economy, rough idle, or increased emissions.
What causes the P0135 code to appear?
Common causes include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or an issue with the ECM.
How do I diagnose the P0135 code?
Start by inspecting the wiring and connectors for damage, test the heater circuit for continuity, and check the sensor's resistance using a multimeter.
Can I drive my 2016 GMC Sierra with the P0135 code?
While the vehicle is typically drivable, prolonged driving with this code can lead to increased emissions and potential damage to the catalytic converter.
How do I fix the P0135 code?
Repairs may include replacing the faulty oxygen sensor, repairing damaged wiring, checking and replacing fuses, or addressing ECM issues if necessary.
How much does it cost to fix the P0135 code?
Replacing the oxygen sensor typically costs $150 to $400, depending on parts and labor. Wiring repairs or ECM replacements may cost more.
Is Bank 1 Sensor 1 upstream or downstream?
Bank 1 Sensor 1 is the upstream oxygen sensor, located before the catalytic converter on the side of the engine with cylinder 1.
Can a bad oxygen sensor cause the P0135 code?
Yes, a defective oxygen sensor heater element is one of the most common reasons for the P0135 code.
How do I prevent the P0135 code from occurring again?
Regular maintenance, inspecting wiring, and replacing oxygen sensors at recommended intervals can help prevent this issue from reoccurring.
Discuss the causes and fixes for P0135 2016 GMC Sierra OBDII Code
Code P0135 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.