P0133 Lexus Code - HO2S11 Circuit Slow Response
Quick Answer
The P0133 code for Lexus vehicles refers to a slow response from the HO2S11 (Heated Oxygen Sensor 1 Sensor 1) circuit. Common causes include Contaminated or deteriorating HO2S11 sensor, Wiring issues such as corrosion or damage, Faulty ECM. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0133 Lexus indicates HO2S11 Circuit Slow Response.
- Common causes
- Common causes include Contaminated or deteriorating HO2S11 sensor, Wiring issues such as corrosion or damage, Faulty ECM.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0133 Lexus Description
The P0133 code for Lexus vehicles refers to a slow response from the HO2S11 (Heated Oxygen Sensor 1 Sensor 1) circuit. The HO2S11 sensor is responsible for measuring the oxygen content in the exhaust gases and sending this information to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. A slow response from this sensor can lead to decreased engine performance, reduced fuel efficiency, and increased emissions.
Common Causes of P0133 Lexus
- Contaminated or deteriorating HO2S11 sensor
- Wiring issues such as corrosion or damage
- Faulty ECM
- Exhaust leaks
- Poor quality fuel
Symptoms of P0133 Lexus
- Rough idling
- Hesitation during acceleration
- Decreased fuel efficiency
- Increased emissions
- Check engine light illuminated
How to Fix P0133 Lexus
- Begin by diagnosing the issue using a diagnostic scan tool to confirm the P0133 code and identify the specific cause.
- Inspect the HO2S11 sensor and wiring for any signs of contamination, damage, or corrosion. Replace the sensor if necessary.
- Check for exhaust leaks that may be affecting the sensor's readings. Repair or replace any damaged components.
- Test the ECM to ensure it is functioning properly and communicating with the HO2S11 sensor correctly. Replace the ECM if it is faulty.
- Clear the code from the ECM's memory and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P0133 Lexus
The cost of repairing a P0133 code for a Lexus vehicle can vary depending on the specific cause of the issue. On average, replacing the HO2S11 sensor can cost between $100 and $300, including parts and labor. If additional repairs are required, such as fixing wiring issues or replacing the ECM, the total cost can range from $200 to $800 or more. It is important to note that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Additionally, prices for parts and labor may be higher at dealerships or in metropolitan areas. It is recommended to obtain quotes from local repair shops for a more accurate estimate of the repair costs.
Tech Notes for P0133 Lexus
When is the Code Detected?
Need more information about the P0133 Lexus code?
Need more information on how to fix the P0133 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0133 Lexus code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0133 Lexus Code
No Frequently Asked Questions about P0133 Lexus Code found.
Discuss the causes and fixes for P0133 Lexus OBDII Code
Code P0133 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.