Engine-CodesNissan – P0133 2013 Nissan Rogue

P0133 2013 Nissan Rogue Code - Air Fuel Ratio Circuit Slow Response Bank 1 Sensor 1

Quick Answer

The P0133 diagnostic trouble code (DTC) for a 2013 Nissan Rogue indicates an issue with the Air Fuel Ratio Circuit Slow Response for Bank 1 Sensor 1. Common causes include Faulty oxygen sensor: The most common cause of this code is a malfunctioning oxygen sensor that is not responding as quickly as it should, Wiring issues: Damaged or corroded wiring connecting the oxygen sensor to the ECM can cause communication problems and trigger this code, Exhaust leaks: Leaks in the exhaust system before the oxygen sensor can lead to inaccurate readings and trigger the code. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0133 2013 Nissan Rogue indicates Air Fuel Ratio Circuit Slow Response Bank 1 Sensor 1.
Common causes
Common causes include Faulty oxygen sensor: The most common cause of this code is a malfunctioning oxygen sensor that is not responding as quickly as it should, Wiring issues: Damaged or corroded wiring connecting the oxygen sensor to the ECM can cause communication problems and trigger this code, Exhaust leaks: Leaks in the exhaust system before the oxygen sensor can lead to inaccurate readings and trigger the code.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0133 2013 Nissan Rogue Description

The P0133 diagnostic trouble code (DTC) for a 2013 Nissan Rogue indicates an issue with the Air Fuel Ratio Circuit Slow Response for Bank 1 Sensor 1. This code specifically relates to the upstream oxygen sensor located before the catalytic converter on the side of the engine that contains cylinder #1. The oxygen sensor is responsible for measuring the oxygen content in the exhaust gases and sending this information to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion.

OBDII Code P0133 2013 Nissan Rogue - Air Fuel Ratio Circuit Slow Response Bank 1 Sensor 1
P0133 2013 Nissan Rogue Code - Air Fuel Ratio Circuit Slow Response Bank 1 Sensor 1

Common Causes of P0133 2013 Nissan Rogue

  1. Faulty oxygen sensor: The most common cause of this code is a malfunctioning oxygen sensor that is not responding as quickly as it should.
  2. Wiring issues: Damaged or corroded wiring connecting the oxygen sensor to the ECM can cause communication problems and trigger this code.
  3. Exhaust leaks: Leaks in the exhaust system before the oxygen sensor can lead to inaccurate readings and trigger the code.
  4. Vacuum leaks: Any vacuum leaks in the intake system can affect the air-fuel mixture and cause the oxygen sensor to respond slowly.

Symptoms of P0133 2013 Nissan Rogue

  1. Decreased fuel efficiency: A malfunctioning oxygen sensor can cause the engine to run rich or lean, leading to decreased fuel economy.
  2. Rough idling or stalling: Incorrect air-fuel mixture can result in rough idling or even engine stalling.
  3. Check Engine Light: The illumination of the Check Engine Light on the dashboard is a common symptom associated with this code.
  4. Reduced engine performance: The vehicle may experience a loss of power or acceleration due to improper fuel mixture.

How to Fix P0133 2013 Nissan Rogue

  1. Diagnose the issue: Use a diagnostic scanner to read the code and perform tests to determine if the oxygen sensor is responding slowly.
  2. Replace the oxygen sensor: If the sensor is faulty, replace it with a new one compatible with the vehicle's make and model.
  3. Check wiring: Inspect the wiring harness for any damage or corrosion and repair or replace as needed.
  4. Repair exhaust leaks: If there are any leaks in the exhaust system, repair them to ensure accurate readings from the oxygen sensor.
  5. Clear the code: After completing the repairs, clear the code from the ECM's memory using the diagnostic scanner.

Cost to Fix P0133 2013 Nissan Rogue

The typical repair costs for addressing a P0133 code on a 2013 Nissan Rogue can range from $150 to $400, depending on the cost of the oxygen sensor and any additional parts or labor required for the repair. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check local rates for a more accurate estimate.

Tech Notes for P0133 2013 Nissan Rogue

Replacing the Air fuel ratio (A/F) sensor 1 bank 1 usually takes care of the problem.

When is the Code Detected?

The Air Fuel Ratio (A/F) signal computed by Engine Control Module (ECM) from the A/F sensor 1 signal takes more than the specified time

Need more information about the P0133 2013 Nissan Rogue code?

Need more information on how to fix the P0133 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0133 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0133 2013 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0133 in a 2013 Nissan Rogue?

- Common symptoms include poor fuel economy, rough idling, engine misfires, and an illuminated check engine light.

2. What does the OBDII code P0133 on a 2013 Nissan Rogue indicate?

- The code P0133 indicates a slow response from the air-fuel ratio sensor located in Bank 1 Sensor 1 of the vehicle.

3. What are some possible causes of the P0133 code in a 2013 Nissan Rogue?

- Possible causes include a faulty air-fuel ratio sensor, wiring issues, a vacuum leak, exhaust system leaks, or a malfunctioning engine control module.

4. How can I diagnose the P0133 code on my 2013 Nissan Rogue?

- Diagnosing the P0133 code involves checking the air-fuel ratio sensor's wiring, connections, and sensor performance using an OBDII scanner or multimeter.

5. Can I drive my 2013 Nissan Rogue with the P0133 code present?

- It is not recommended to drive your vehicle with the P0133 code as it can cause decreased fuel efficiency and potential engine damage if left unaddressed.

6. How can I repair the P0133 code on my 2013 Nissan Rogue?

- Repairing the P0133 code may involve replacing the air-fuel ratio sensor, repairing wiring issues, fixing any vacuum or exhaust leaks, or reprogramming the engine control module.

7. Are there any DIY tips for fixing the P0133 code in a 2013 Nissan Rogue?

- While some aspects of diagnosing and repairing the P0133 code can be done DIY, it is recommended to seek professional help for accurate diagnosis and proper repair.

8. How much does it typically cost to repair the P0133 code on a 2013 Nissan Rogue?

- The cost of repairing the P0133 code can vary depending on the exact cause of the issue, but it may range from $100 to $500, including parts and labor.

9. Will resetting the check engine light resolve the P0133 code temporarily?

- Resetting the check engine light may temporarily clear the code, but unless the underlying issue causing the P0133 code is addressed, the light is likely to come back on.

10. How often should the air-fuel ratio sensor be replaced in a 2013 Nissan Rogue to prevent the P0133 code?

- The air-fuel ratio sensor should typically be replaced every 100,000 miles or as recommended by the manufacturer to prevent issues like the P0133 code from occurring.

Discuss the causes and fixes for P0133 2013 Nissan Rogue OBDII Code

Code P0133 2013 Nissan Rogue comments

No comments found for this page.