P0130 Scion Code - Oxygen Sensor Circuit Malfunction Bank 1 Sensor 1
Quick Answer
The P0130 Scion code indicates an issue with the oxygen sensor circuit for Bank 1 Sensor 1. Common causes include Faulty oxygen sensor, Damaged wiring or connectors in the sensor circuit, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0130 Scion indicates Oxygen Sensor Circuit Malfunction Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty oxygen sensor, Damaged wiring or connectors in the sensor circuit, Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0130 Scion Description
The P0130 Scion code indicates an issue with the oxygen sensor circuit for Bank 1 Sensor 1. This sensor is responsible for measuring the oxygen content in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. A malfunction in this circuit can lead to poor engine performance, increased emissions, and potential damage to the catalytic converter.
Common Causes of P0130 Scion
- Faulty oxygen sensor
- Damaged wiring or connectors in the sensor circuit
- Exhaust leaks near the sensor
- Contaminated sensor due to oil or coolant leaks
- ECM software issues
Symptoms of P0130 Scion
- Decreased fuel efficiency
- Rough idling or stalling
- Hesitation during acceleration
- Engine misfires
- Failed emissions test
How to Fix P0130 Scion
- Start by identifying the location of Bank 1 Sensor 1, typically located on the exhaust manifold before the catalytic converter.
- Inspect the wiring and connectors for any damage or corrosion. Repair or replace as necessary.
- Test the oxygen sensor using a multimeter to check for proper functionality. Replace the sensor if it is faulty.
- Clear the diagnostic trouble codes with a scan tool and test drive the vehicle to ensure the issue has been resolved.
- If the code persists, further diagnostics may be needed to identify any underlying issues with the ECM or exhaust system.
Cost to Fix P0130 Scion
The cost of repairing an oxygen sensor circuit malfunction can vary depending on the make and model of the vehicle, as well as the location of the sensor. On average, the cost of replacing an oxygen sensor ranges from $150 to $400, including parts and labor. Additional costs may apply if other components in the circuit need to be repaired or replaced. It's advisable to consult with a mechanic or auto repair shop for a more accurate estimate based on the specific vehicle and location.
When is the Code Detected?
Need more information about the P0130 Scion code?
Need more information on how to fix the P0130 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0130 Scion code diagnosed by a professional: Find a repair shop in your area
Information for Specific Scion Models
- P0130 2005 Scion xB — Oxygen Sensor Circuit Malfunction Bank 1 Sensor 1
- P0130 2006 Scion xB — Oxygen Sensor Circuit Malfunction Bank 1 Sensor 1
- P0130 2007 Scion xB — Oxygen Sensor Circuit Malfunction Bank 1 Sensor 1
Frequently Asked Questions about P0130 Scion Code
No Frequently Asked Questions about P0130 Scion Code found.
Discuss the causes and fixes for P0130 Scion OBDII Code
Code P0130 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.