Engine-Codes.com
Engine-Codes – Nissan – P0130 Nissan

P0130 Nissan Code - Air Fuel Ratio Circuit Bank 1 Sensor 1

Quick Answer

The P0130 diagnostic trouble code (DTC) for Nissan vehicles specifically refers to an issue with the Air Fuel Ratio Circuit for Bank 1 Sensor 1. Common causes include Faulty Air Fuel Ratio Sensor: The sensor itself may be malfunctioning, providing incorrect readings to the ECU, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECU can cause communication errors, Exhaust Leaks: Leaks in the exhaust system can affect the sensor's readings, triggering the P0130 code. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0130 Nissan indicates Air Fuel Ratio Circuit Bank 1 Sensor 1.
Common causes
Common causes include Faulty Air Fuel Ratio Sensor: The sensor itself may be malfunctioning, providing incorrect readings to the ECU, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECU can cause communication errors, Exhaust Leaks: Leaks in the exhaust system can affect the sensor's readings, triggering the P0130 code.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0130 Nissan Description

The P0130 diagnostic trouble code (DTC) for Nissan vehicles specifically refers to an issue with the Air Fuel Ratio Circuit for Bank 1 Sensor 1. This sensor is located in the exhaust system before the catalytic converter and is responsible for measuring the oxygen content in the exhaust gases. The data collected by this sensor is crucial for the engine control unit (ECU) to adjust the air-fuel mixture to ensure optimal combustion efficiency.

OBDII Code P0130 Nissan - Air Fuel Ratio Circuit Bank 1 Sensor 1
P0130 Nissan Code - Air Fuel Ratio Circuit Bank 1 Sensor 1

Common Causes of P0130 Nissan

  1. Faulty Air Fuel Ratio Sensor: The sensor itself may be malfunctioning, providing incorrect readings to the ECU.
  2. Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECU can cause communication errors.
  3. Exhaust Leaks: Leaks in the exhaust system can affect the sensor's readings, triggering the P0130 code.
  4. Engine Control Module (ECM) Failure: A malfunctioning ECM can also lead to issues with the Air Fuel Ratio Circuit.
  5. Fuel System Problems: Issues with the fuel system, such as a clogged fuel filter, can impact the air-fuel mixture.

Symptoms of P0130 Nissan

  1. Check Engine Light: The most common symptom associated with the P0130 code is the illumination of the check engine light on the vehicle's dashboard.
  2. Decreased Fuel Efficiency: A faulty Air Fuel Ratio Sensor can lead to incorrect fuel mixture adjustments, resulting in decreased fuel efficiency.
  3. Rough Idling: The engine may experience rough idling or stalling due to incorrect air-fuel ratios.
  4. Engine Misfires: Incorrect air-fuel ratios can cause engine misfires, leading to a rough running engine.
  5. Increased Emissions: A malfunctioning Air Fuel Ratio Sensor can result in increased emissions from the vehicle.

How to Fix P0130 Nissan

  1. Diagnostic Scan: Use an OBD-II scanner to retrieve the specific trouble code and confirm that it is indeed P0130.
  2. Check Sensor Wiring: Inspect the wiring harness connecting the sensor to the ECU for any damage or corrosion.
  3. Test Sensor: Test the Air Fuel Ratio Sensor using a multimeter to ensure it is functioning correctly.
  4. Replace Sensor: If the sensor is faulty, replace it with a new one following manufacturer guidelines.
  5. Clear Codes: Clear the DTC using the OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0130 Nissan

The cost of repairing a P0130 code can vary depending on the specific cause of the issue. On average, replacing an Air Fuel Ratio Sensor can cost between $100 to $300 for the part alone. Labor costs can range from $80 to $150 per hour, with the total repair bill potentially amounting to $200 to $500. It's important to note that these estimates are rough averages and actual costs may vary based on the vehicle's make and model, as well as the location and labor rates of the auto repair shop.

What does this mean?

Tech Notes for P0130 Nissan

Replacing the Air fuel ratio (A/F) sensor bank 1 sensor 1 usually takes care of the problem.



For Nissan models before 2005 see: P0130 Nissan

When is the Code Detected?

The Air Fuel Ratio (A/F) signal computed by Engine Control Module (ECM) from the A/F sensor 1 signal is constantly in the range other than approx. 1.5V.

Need more information about the P0130 Nissan code?

Need more information on how to fix the P0130 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0130 Nissan code diagnosed by a professional: Find a repair shop in your area

Information for Specific Nissan Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0130 Nissan Code

1. What are the common symptoms of OBDII code P0130 in a Nissan?

The common symptoms of code P0130 in a Nissan include poor fuel economy, rough idling, engine misfires, and the illumination of the check engine light.

2. What does the OBDII code P0130 on a Nissan mean?

Code P0130 in a Nissan indicates a malfunction in the Air Fuel Ratio Circuit Bank 1 Sensor 1, which is the oxygen sensor located before the catalytic converter.

3. What are the possible causes of OBDII code P0130 in a Nissan?

The potential causes of code P0130 in a Nissan include a faulty oxygen sensor, wiring issues in the sensor circuit, exhaust leaks, or a problem with the engine's fuel system.

4. How can I diagnose the OBDII code P0130 in my Nissan?

Diagnosing code P0130 in a Nissan involves using an OBDII scanner to retrieve the specific fault code, inspecting the oxygen sensor and its wiring for damage, and checking for any exhaust leaks.

5. Can I drive my Nissan with OBDII code P0130?

It is not recommended to drive your Nissan with code P0130, as it can lead to poor engine performance and potential damage to the catalytic converter. It is best to address the issue promptly.

6. How do I repair OBDII code P0130 in my Nissan?

Repairing code P0130 in a Nissan may involve replacing the faulty oxygen sensor, repairing damaged wiring, fixing any exhaust leaks, or addressing issues with the fuel system as needed.

7. Is it possible to reset OBDII code P0130 in a Nissan without fixing the underlying issue?

Resetting the code without addressing the underlying problem may temporarily turn off the check engine light, but the code is likely to return if the root cause is not resolved.

8. How much does it cost to fix OBDII code P0130 in a Nissan?

The cost of fixing code P0130 in a Nissan can vary depending on the specific issue causing the code, the labor rates of the repair shop, and the cost of any replacement parts needed.

9. How often does OBDII code P0130 occur in Nissan vehicles?

Code P0130 can occur in Nissan vehicles with higher mileage or as they age, especially if the oxygen sensor or related components begin to wear out or fail.

10. Can a DIY enthusiast repair OBDII code P0130 in a Nissan?

While some DIY enthusiasts may be able to address code P0130 by replacing the oxygen sensor or checking for wiring issues, it is recommended to consult a professional mechanic for accurate diagnosis and repair.

Discuss the causes and fixes for P0130 Nissan OBDII Code

Submit a New Comment

  • Hi, my car is nissan altima 2013 2.5 sv
    coming 5 codes can you help me.
    p0130 p014d p014c p0172 p0443

    Reply to Comment

  • Start by clearing all the codes and then check what code comes back first.. Sounds like you may have a problem with the Mass Air Flow (MAF) sensor. Also make sure the air filter and air filter box are clean.

    Reply to Comment

  • Hi,i sorry i forget to tell you there red oil on air filter?I changed the air filter and agin coming red oil on the filter OMG from where coming that oil ,and i changed MAF sensor still same problem,thanks please help me.

    Reply to Comment