P0130 Acura Code - Air/Fuel Ratio Sensor 1 Out of Range
Quick Answer
The diagnostic trouble code P0130 for Acura vehicles indicates that the Air/Fuel Ratio Sensor 1 is out of range. Common causes include Faulty Air/Fuel Ratio Sensor 1, Damaged wiring or connectors, Exhaust leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0130 Acura indicates Air/Fuel Ratio Sensor 1 Out of Range.
- Common causes
- Common causes include Faulty Air/Fuel Ratio Sensor 1, Damaged wiring or connectors, Exhaust leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0130 Acura Description
The diagnostic trouble code P0130 for Acura vehicles indicates that the Air/Fuel Ratio Sensor 1 is out of range. This sensor is responsible for measuring the amount of oxygen in the exhaust gases and providing feedback to the engine control module for proper air/fuel mixture adjustment. When the sensor is out of range, it means that the air/fuel ratio being measured is not within the expected parameters, which can lead to poor engine performance, decreased fuel efficiency, and increased emissions.
Common Causes of P0130 Acura
- Faulty Air/Fuel Ratio Sensor 1
- Damaged wiring or connectors
- Exhaust leaks
- Malfunctioning engine control module
- Contamination of sensor
Symptoms of P0130 Acura
- Rough idling
- Hesitation or stalling
- Decreased power and acceleration
- Engine misfires
- Increased fuel consumption
How to Fix P0130 Acura
- Diagnose the issue by using a scan tool to verify the P0130 code and inspect the sensor and related components.
- Replace the Air/Fuel Ratio Sensor 1 if it is determined to be faulty. Ensure the new sensor is compatible with the vehicle's make and model.
- Check the wiring and connectors for any damage or corrosion. Repair or replace as necessary.
- Inspect for any exhaust leaks and repair them to prevent further contamination of the sensor.
- Clear the diagnostic trouble codes and perform a test drive to ensure the issue has been resolved.
Cost to Fix P0130 Acura
The cost of repairing the Air/Fuel Ratio Sensor 1 out of range issue can vary depending on the make and model of the vehicle, as well as the location and labor rates of the auto repair shop. Typically, the cost of a new sensor can range from $100 to $300, with additional costs for labor and any necessary parts or repairs. Overall, the total repair cost for this issue can average between $200 and $500. It is advisable to consult with a professional mechanic for a more accurate estimate based on the specific circumstances of the vehicle.
Need more information about the P0130 Acura code?
Need more information on how to fix the P0130 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0130 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0130 Acura Code
What does OBDII code P0130 mean for an Acura?
P0130 indicates that the Air/Fuel Ratio Sensor 1 (upstream sensor) is reporting values outside the expected range, affecting engine performance and efficiency.
What are the symptoms of code P0130 on an Acura?
Symptoms may include poor fuel economy, rough idle, reduced engine performance, and the check engine light being illuminated.
What causes the P0130 code on an Acura?
Common causes include a faulty air/fuel ratio sensor, damaged wiring or connectors, exhaust leaks near the upstream sensor, or issues with the engine control module (ECM).
Can I drive my Acura with a P0130 code?
While the car may still be drivable, driving with a P0130 code can lead to decreased fuel efficiency and potential damage to the catalytic converter over time.
How do I diagnose code P0130 on an Acura?
Diagnosis typically involves inspecting the air/fuel ratio sensor, checking for wiring issues, testing for exhaust leaks, and using a scan tool to monitor sensor performance.
How do I fix code P0130 on an Acura?
Fixes may include replacing the air/fuel ratio sensor, repairing or replacing damaged wiring, sealing exhaust leaks, or updating/reprogramming the ECM if necessary.
What tools do I need to repair a P0130 code on an Acura?
Common tools include an OBDII scan tool, multimeter for testing wiring, socket set for sensor removal, and exhaust sealant if leaks are present.
How much does it cost to repair a P0130 code on an Acura?
Repair costs vary but can range from $150 to $400 for parts and labor, depending on whether the sensor needs replacement or wiring repairs are required.
Can a dirty air filter cause a P0130 code on an Acura?
A dirty air filter typically does not cause this code, but it can indirectly affect air/fuel mixture and engine performance, exacerbating existing sensor issues.
Is code P0130 related to the oxygen sensor on an Acura?
Yes, the air/fuel ratio sensor is a type of oxygen sensor that monitors the air-fuel mixture in the exhaust to optimize engine performance.
Discuss the causes and fixes for P0130 Acura OBDII Code
Code P0130 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.