P0129 Jeep Code - Barometric Pressure Out Of Range Low
Quick Answer
When the P0129 code appears on a Jeep, it indicates that the barometric pressure sensor is detecting a pressure that is lower than the expected range. Common causes include Faulty Barometric Pressure Sensor: The most common cause of the P0129 code is a malfunctioning barometric pressure sensor, Vacuum Leaks: Any vacuum leaks in the intake system can lead to incorrect pressure readings and trigger this code, Wiring Issues: Damaged or corroded wiring connected to the barometric pressure sensor can cause inaccurate readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0129 Jeep indicates Barometric Pressure Out Of Range Low.
- Common causes
- Common causes include Faulty Barometric Pressure Sensor: The most common cause of the P0129 code is a malfunctioning barometric pressure sensor, Vacuum Leaks: Any vacuum leaks in the intake system can lead to incorrect pressure readings and trigger this code, Wiring Issues: Damaged or corroded wiring connected to the barometric pressure sensor can cause inaccurate readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0129 Jeep Description
When the P0129 code appears on a Jeep, it indicates that the barometric pressure sensor is detecting a pressure that is lower than the expected range. The barometric pressure sensor is crucial for the proper functioning of the vehicle's engine control system, as it helps in determining the correct air-fuel mixture for combustion. When the barometric pressure is out of range low, it can lead to issues with engine performance, fuel efficiency, and emissions. This code can trigger the vehicle's check engine light and put the engine into a reduced power mode to prevent further damage.
Common Causes of P0129 Jeep
- Faulty Barometric Pressure Sensor: The most common cause of the P0129 code is a malfunctioning barometric pressure sensor.
- Vacuum Leaks: Any vacuum leaks in the intake system can lead to incorrect pressure readings and trigger this code.
- Wiring Issues: Damaged or corroded wiring connected to the barometric pressure sensor can cause inaccurate readings.
- PCM Malfunction: A problem with the powertrain control module (PCM) can also result in the barometric pressure sensor reading being out of range low.
Symptoms of P0129 Jeep
- Check Engine Light: The most common symptom associated with the P0129 code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Power: The vehicle may go into a reduced power mode to prevent further damage to the engine.
- Poor Fuel Efficiency: The engine may experience decreased fuel efficiency due to incorrect air-fuel mixture.
- Rough Idle: The vehicle may have a rough or erratic idle when the barometric pressure is out of range low.
How to Fix P0129 Jeep
- Diagnose: Use an OBD-II scanner to read the code and confirm that it is indeed P0129. Check the barometric pressure sensor and related components for any visible signs of damage or wear.
- Replace Barometric Pressure Sensor: If the sensor is found to be faulty, replace it with a new one. Make sure to follow the manufacturer's instructions for proper installation.
- Check for Vacuum Leaks: Inspect the intake system for any vacuum leaks and repair or replace any damaged components.
- Check Wiring: Inspect the wiring connected to the barometric pressure sensor for any damage or corrosion. Repair or replace any faulty wiring.
- Clear Codes: After completing the repair, clear the code using the OBD-II scanner to reset the check engine light.
Cost to Fix P0129 Jeep
The cost of repairing a P0129 code on a Jeep can vary depending on the specific model and year of the vehicle, as well as the location and labor rates of the auto repair shop. Typically, the cost of replacing a barometric pressure sensor ranges from $100 to $200, including parts and labor. Additional costs may be incurred if there are other underlying issues contributing to the code. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on the specific circumstances.
Need more information about the P0129 Jeep code?
Need more information on how to fix the P0129 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0129 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0129 Jeep Code
No Frequently Asked Questions about P0129 Jeep Code found.
Discuss the causes and fixes for P0129 Jeep OBDII Code
Code P0129 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.