P0125 2009 HONDA ACCORD Code - Engine Coolant Temperature Sensor 1 Malfunction/Slow Response
|P0125 2009 HONDA ACCORD code possible causes
- Low engine coolant level
- Leaking or stuck open thermostat
- Faulty Engine Coolant Temperature (ECT) sensor
- Engine Coolant Temperature (ECT) sensor harness is open or shorted
- Engine Coolant Temperature (ECT) sensor electrical circuit poor connection
|How is the P0125 2009 HONDA ACCORD code repair?
Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P0125 2009 HONDA ACCORD code
The cost to diagnose the P0125 2009 HONDA ACCORD code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the P0125 2009 HONDA ACCORD code detected?
The voltage sent to Engine Control Module (ECM) from the Engine Coolant Temperature (ECT) sensor is not practical, even when some time has passed after starting the engine. The engine is taking too long to reach the normal temperature level.
|What are P0125 2009 HONDA ACCORD code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is P0125 2009 HONDA ACCORD code meaning?
The Engine Coolant Temperature (ECT
) sensor is used to detect the engine coolant temperature. The sensor modifies a voltage signal from the Engine Control Module (ECM
). The modified signal returns to the ECM
as the engine coolant temperature input. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increases.