P0123 Mitsubishi Code - Throttle Position Sensor Circuit High Input
Quick Answer
The P0123 code in a Mitsubishi vehicle indicates that there is a high input signal coming from the throttle position sensor circuit. Common causes include Faulty throttle position sensor, Wiring or connector issues in the TPS circuit, Corrosion or damage to TPS sensor terminals. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 Mitsubishi indicates Throttle Position Sensor Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Wiring or connector issues in the TPS circuit, Corrosion or damage to TPS sensor terminals.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0123 Mitsubishi Description
The P0123 code in a Mitsubishi vehicle indicates that there is a high input signal coming from the throttle position sensor circuit. The throttle position sensor (TPS) is a crucial component of the engine management system, as it monitors the position of the throttle valve and sends this information to the engine control unit (ECU). The ECU then uses this data to adjust the air-fuel mixture and ignition timing for optimal engine performance.
Common Causes of P0123 Mitsubishi
- Faulty throttle position sensor
- Wiring or connector issues in the TPS circuit
- Corrosion or damage to TPS sensor terminals
- ECU malfunction affecting TPS signal
- Vacuum leaks affecting TPS operation
Symptoms of P0123 Mitsubishi
- Loss of power or hesitation during acceleration
- Rough idling or stalling
- Poor fuel efficiency
- Check Engine Light illuminated on the dashboard
- Difficulty shifting gears in an automatic transmission vehicle
How to Fix P0123 Mitsubishi
- Begin by diagnosing the issue using an OBD-II scanner to confirm the P0123 code and identify the specific TPS circuit problem.
- Inspect the throttle position sensor and its wiring for any visible damage, corrosion, or loose connections. Replace or repair as necessary.
- Test the TPS sensor using a multimeter to ensure it is sending the correct voltage signals to the ECU. Adjust or replace the sensor if needed.
- Clear the error code using the OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, consult a professional mechanic to further diagnose and repair any underlying issues with the throttle position sensor circuit.
Cost to Fix P0123 Mitsubishi
The typical repair costs for addressing a P0123 code in a Mitsubishi vehicle can range from $100 to $300, depending on the extent of the issue and the parts needed for repair. This estimate includes the cost of a new throttle position sensor, any necessary wiring repairs, and labor charges. It is important to note that diagnostic time and labor rates at auto repair shops can vary, so it is advisable to check with local service providers for a more accurate estimate based on your specific vehicle make and model.
When is the Code Detected?
Need more information about the P0123 Mitsubishi code?
Need more information on how to fix the P0123 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 Mitsubishi Code
1. What does the OBDII code P0123 mean for a Mitsubishi?
P0123 indicates that the Throttle Position Sensor (TPS) circuit has a high input voltage, suggesting a possible fault with the sensor or its wiring.
2. What are the common symptoms of a P0123 code in a Mitsubishi?
Symptoms may include poor acceleration, rough idling, reduced fuel efficiency, a lack of throttle response, or the vehicle entering "limp" mode.
3. What causes the P0123 code to trigger in a Mitsubishi?
Common causes include a faulty throttle position sensor, damaged or corroded wiring, a loose connector, or issues with the engine control module (ECM).
4. How can I diagnose a P0123 code on my Mitsubishi?
Start by inspecting the TPS and its wiring for damage or loose connections. Use a multimeter to test the sensor's voltage output and compare it to manufacturer specifications.
5. Can I drive my Mitsubishi with a P0123 code?
Driving with this code is not recommended, as it could lead to unsafe driving conditions due to erratic throttle response or reduced engine performance.
6. How do I fix the P0123 code on a Mitsubishi?
Repairs may involve replacing the throttle position sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming the ECM if necessary.
7. How much does it cost to fix a P0123 code on a Mitsubishi?
The cost varies but typically ranges from $100 to $300, depending on whether the TPS or wiring needs repair and if professional diagnostics are required.
8. Can a dirty throttle body cause a P0123 code?
A dirty throttle body is not a direct cause of P0123 but may contribute to throttle-related issues. Cleaning it during diagnostics is a good preventative step.
9. Will resetting the check engine light fix a P0123 code?
Resetting the light might temporarily clear the code, but the underlying issue must be resolved to prevent it from returning.
10. Is the P0123 code specific to Mitsubishi vehicles?
No, P0123 is a generic OBDII code that can apply to many vehicles, but the repair steps may vary depending on the manufacturer and model.
Discuss the causes and fixes for P0123 Mitsubishi OBDII Code
Code P0123 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.