P0123 2014 Chevrolet Silverado Code - Throttle Position Sensor Circuit High Voltage
Quick Answer
The P0123 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that there is a high voltage condition in the throttle position sensor (TPS) circuit. Common causes include Faulty throttle position sensor, Damaged or corroded wiring in the TPS circuit, Loose or poor connections in the TPS circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2014 Chevrolet Silverado indicates Throttle Position Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty throttle position sensor, Damaged or corroded wiring in the TPS circuit, Loose or poor connections in the TPS circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0123 2014 Chevrolet Silverado Description
The P0123 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that there is a high voltage condition in the throttle position sensor (TPS) circuit. The throttle position sensor is a crucial component of the vehicle's electronic throttle control system, responsible for monitoring the position of the throttle pedal and sending this information to the engine control module (ECM). The ECM uses this data to adjust the air-fuel mixture and ignition timing for optimal engine performance.
Common Causes of P0123 2014 Chevrolet Silverado
- Faulty throttle position sensor
- Damaged or corroded wiring in the TPS circuit
- Loose or poor connections in the TPS circuit
- Issues with the ECM or other related components
- Environmental factors such as moisture or debris affecting the TPS circuit
Symptoms of P0123 2014 Chevrolet Silverado
- Erratic idling or surging engine speed
- Poor acceleration or lack of throttle response
- Engine stalling or hesitation during acceleration
- Illumination of the Check Engine Light
- Reduced fuel efficiency
How to Fix P0123 2014 Chevrolet Silverado
- Begin by diagnosing the specific cause of the high voltage condition using a diagnostic scanner to read the trouble codes and data from the TPS sensor.
- Inspect the throttle position sensor and its wiring for any signs of damage, corrosion, or loose connections. Replace or repair any faulty components as needed.
- Test the TPS sensor's voltage output using a multimeter to ensure it is within the specified range. Adjust or replace the sensor if necessary.
- Clear the DTC from the ECM's memory using the diagnostic scanner and perform a test drive to verify that the issue has been resolved.
- If the problem persists, further diagnostic testing may be required to identify any underlying issues with the ECM or other related components.
Cost to Fix P0123 2014 Chevrolet Silverado
The typical repair costs for addressing a P0123 code on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue and the extent of the repairs needed. In general, replacing a faulty throttle position sensor can cost between $100 and $200, while repairing damaged wiring or connectors may range from $50 to $150. Labor costs at auto repair shops typically range from $80 to $150 per hour, with the total repair bill potentially amounting to several hundred dollars. It is advisable to consult with a trusted mechanic or dealership for a more accurate estimate based on the specific circumstances of the vehicle.
Need more information about the P0123 2014 Chevrolet Silverado code?
Need more information on how to fix the P0123 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2014 Chevrolet Silverado Code
What does the OBDII code P0123 mean for a 2014 Chevrolet Silverado?
P0123 indicates that the Throttle Position Sensor (TPS) circuit is detecting a higher voltage than expected, typically above 4.5 volts.
What are the common symptoms of code P0123 in a 2014 Chevrolet Silverado?
Symptoms may include poor acceleration, rough idling, hesitation during acceleration, and the Check Engine Light being illuminated.
What causes the P0123 code to appear in a 2014 Chevrolet Silverado?
Common causes include a faulty Throttle Position Sensor (TPS), damaged wiring or connectors, or issues with the vehicle's Engine Control Module (ECM).
Can I drive my 2014 Chevrolet Silverado with the P0123 code active?
Driving with this code may be possible but is not recommended due to potential safety risks like erratic throttle response or reduced engine performance.
How do I diagnose the P0123 code on a 2014 Chevrolet Silverado?
Start by inspecting the TPS wiring and connectors for damage or corrosion. Use a multimeter to check the voltage levels at the TPS sensor and ensure they are within the specified range.
How do I fix the P0123 code on a 2014 Chevrolet Silverado?
Repairs may include replacing the Throttle Position Sensor, repairing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.
Does the P0123 code require a TPS sensor replacement on a 2014 Chevrolet Silverado?
Not always. If the sensor tests within specifications, the issue may lie in the wiring, connectors, or ECM.
How much does it cost to repair the P0123 code on a 2014 Chevrolet Silverado?
Costs vary depending on the repairs needed. Replacing the TPS sensor may cost $100-$300, while wiring or ECM repairs could add to the expense.
Can a dirty throttle body cause the P0123 code on a 2014 Chevrolet Silverado?
A dirty throttle body is unlikely to directly cause P0123, but cleaning it as part of routine maintenance may prevent other throttle-related issues.
Should I clear the P0123 code after repairs on a 2014 Chevrolet Silverado?
Yes, after completing repairs, clear the code with an OBDII scanner and test drive the vehicle to confirm the issue has been resolved.
Discuss the causes and fixes for P0123 2014 Chevrolet Silverado OBDII Code
Code P0123 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.