P0123 2012 Nissan Rogue Code - Throttle Position Sensor/Switch '1' Circuit High Input
Quick Answer
The P0123 diagnostic trouble code (DTC) specifically refers to the Throttle Position Sensor/Switch '1' Circuit High Input in a 2012 Nissan Rogue. Common causes include Faulty throttle position sensor, Corroded or damaged wiring/connectors leading to the TPS, Issues with the ECM or related components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2012 Nissan Rogue indicates Throttle Position Sensor/Switch '1' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Corroded or damaged wiring/connectors leading to the TPS, Issues with the ECM or related components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0123 2012 Nissan Rogue Description
The P0123 diagnostic trouble code (DTC) specifically refers to the Throttle Position Sensor/Switch '1' Circuit High Input in a 2012 Nissan Rogue. This code indicates that there is a problem with the throttle position sensor (TPS) or its circuitry, resulting in a high voltage input being detected by the engine control module (ECM). The TPS is a crucial sensor that monitors the position of the throttle valve and provides feedback to the ECM to adjust fuel delivery and ignition timing accordingly. When the TPS circuit reports a high voltage input, it can lead to various issues with engine performance, fuel economy, and drivability.
Common Causes of P0123 2012 Nissan Rogue
- Faulty throttle position sensor
- Corroded or damaged wiring/connectors leading to the TPS
- Issues with the ECM or related components
- Vacuum leaks affecting the TPS readings
- Mechanical issues with the throttle body affecting sensor operation
Symptoms of P0123 2012 Nissan Rogue
- Engine hesitation or lack of response when accelerating
- Rough idling or stalling at idle
- Poor fuel efficiency
- Check Engine Light illuminated on the dashboard
- Reduced engine power or performance
How to Fix P0123 2012 Nissan Rogue
- Begin by conducting a thorough inspection of the throttle position sensor, wiring, and connectors for any visible damage or corrosion.
- Test the TPS using a multimeter to check for proper voltage output and resistance values according to the manufacturer's specifications.
- If the TPS is found to be faulty, replace it with a new sensor and ensure proper calibration and alignment.
- Check and repair any damaged wiring or connectors associated with the TPS to ensure a reliable connection.
- Clear the DTC codes from the ECM and perform a test drive to confirm that the issue has been resolved.
Cost to Fix P0123 2012 Nissan Rogue
The typical repair costs for addressing a Throttle Position Sensor/Switch '1' Circuit High Input code in a 2012 Nissan Rogue can range from $100 to $300, depending on the specific components that need to be replaced and the labor involved. This estimate includes the cost of a new throttle position sensor, any necessary wiring or connectors, and the labor charges for diagnosis and repair. It is important to note that the actual costs may vary based on the location of the repair shop, the availability of parts, and the extent of the damage or repairs required. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate based on your individual circumstances.
Tech Notes for P0123 2012 Nissan Rogue
When is the Code Detected?
Need more information about the P0123 2012 Nissan Rogue code?
Need more information on how to fix the P0123 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2012 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0123 in a 2012 Nissan Rogue?
The common symptoms of OBDII code P0123 in a 2012 Nissan Rogue include issues with acceleration, poor engine performance, stalling, and in some cases, the vehicle may go into limp mode.
2. What does the OBDII code P0123 'Throttle Position Sensor/Switch '1' Circuit High Input' mean for a 2012 Nissan Rogue?
The OBDII code P0123 indicates that there is a high input signal coming from the throttle position sensor or switch '1' circuit in a 2012 Nissan Rogue, suggesting a potential issue with the throttle position sensor.
3. What are the possible causes of OBDII code P0123 in a 2012 Nissan Rogue?
Some possible causes of OBDII code P0123 in a 2012 Nissan Rogue include a faulty throttle position sensor, a damaged sensor wiring harness, a corroded connector, or issues with the engine control module.
4. How can I diagnose the OBDII code P0123 in my 2012 Nissan Rogue?
Diagnosing OBDII code P0123 in a 2012 Nissan Rogue typically involves using a scan tool to retrieve the code, checking the throttle position sensor's wiring and connector for any damage or corrosion, and testing the sensor's voltage output.
5. Can I continue driving my 2012 Nissan Rogue with OBDII code P0123?
It is not recommended to continue driving your 2012 Nissan Rogue with OBDII code P0123, as it can lead to poor engine performance, stalling, and potentially unsafe driving conditions. It is best to address the issue promptly.
6. How do I repair OBDII code P0123 in my 2012 Nissan Rogue?
To repair OBDII code P0123 in a 2012 Nissan Rogue, you may need to replace the throttle position sensor, repair any damaged wiring or connectors, or reset the engine control module to clear the code.
7. Are there any DIY tips for fixing OBDII code P0123 in my 2012 Nissan Rogue?
While some basic troubleshooting steps like checking the sensor's wiring and connector can be done DIY, it is recommended to consult a professional mechanic for a proper diagnosis and repair of OBDII code P0123 in a 2012 Nissan Rogue.
8. How much does it typically cost to repair OBDII code P0123 in a 2012 Nissan Rogue?
The cost of repairing OBDII code P0123 in a 2012 Nissan Rogue can vary depending on the specific issue causing the code, the labor rates of the repair shop, and the cost of parts needed for the repair. It is advisable to get a few quotes from different mechanics.
9. Can a faulty throttle position sensor cause other issues in a 2012 Nissan Rogue besides triggering OBDII code P0123?
Yes, a faulty throttle position sensor in a 2012 Nissan Rogue can cause a range of issues beyond triggering OBDII code P0123, including poor fuel economy, rough idling, difficulty shifting gears, and overall reduced engine performance.
10. How important is it to address OBDII code P0123 promptly in a 2012 Nissan Rogue?
It is crucial to address OBDII code P0123 promptly in a 2012 Nissan Rogue to prevent further damage to the vehicle, ensure optimal engine performance, and maintain safe driving conditions. Delaying repairs can lead to more severe issues down the line.
Discuss the causes and fixes for P0123 2012 Nissan Rogue OBDII Code
Code P0123 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.