Engine-Codes.com
Engine-Codes – Nissan – P0123 2008 Nissan Versa

P0123 2008 Nissan Versa Code - Throttle Position Sensor/Switch '1' Circuit High Input

Quick Answer

The P0123 code on a 2008 Nissan Versa indicates a problem with the Throttle Position Sensor (TPS) circuit, specifically a high input signal. Common causes include Faulty Throttle Position Sensor, Damaged or corroded wiring in the TPS circuit, Poor electrical connection at the TPS sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0123 2008 Nissan Versa indicates Throttle Position Sensor/Switch '1' Circuit High Input.
Common causes
Common causes include Faulty Throttle Position Sensor, Damaged or corroded wiring in the TPS circuit, Poor electrical connection at the TPS sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 11, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0123 2008 Nissan Versa Description

The P0123 code on a 2008 Nissan Versa indicates a problem with the Throttle Position Sensor (TPS) circuit, specifically a high input signal. The TPS is a crucial component that monitors the position of the throttle valve and sends this information to the engine control module (ECM) to adjust fuel injection and ignition timing. When the TPS circuit reports a high input signal, it means that the voltage being sent by the sensor is higher than the expected range, causing the ECM to incorrectly interpret throttle position. This can lead to various drivability issues and affect the overall performance of the vehicle.

OBDII Code P0123 2008 Nissan Versa - Throttle Position Sensor/Switch '1' Circuit High Input
P0123 2008 Nissan Versa Code - Throttle Position Sensor/Switch '1' Circuit High Input

Common Causes of P0123 2008 Nissan Versa

  1. Faulty Throttle Position Sensor
  2. Damaged or corroded wiring in the TPS circuit
  3. Poor electrical connection at the TPS sensor
  4. Issues with the ECM or related components
  5. Environmental factors such as moisture or debris affecting the TPS sensor

Symptoms of P0123 2008 Nissan Versa

  1. Erratic or surging engine performance
  2. Difficulty accelerating smoothly
  3. Check Engine Light illuminated on the dashboard
  4. Reduced fuel efficiency
  5. Engine stalling or idling inconsistently

How to Fix P0123 2008 Nissan Versa

  1. Start by verifying the P0123 code using a diagnostic scanner and checking for any other related codes.
  2. Inspect the Throttle Position Sensor and its wiring for any visible damage or corrosion.
  3. Test the TPS sensor using a multimeter to ensure it is functioning within the specified voltage range.
  4. Replace the Throttle Position Sensor if it fails the voltage test, making sure to calibrate the new sensor properly.
  5. Clear the diagnostic trouble codes, reset the ECM, and test drive the vehicle to confirm that the issue has been resolved.

Cost to Fix P0123 2008 Nissan Versa

The typical repair costs for addressing a P0123 code on a 2008 Nissan Versa can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor in your area. Additional costs may be incurred if other components need to be replaced or if further diagnostics are required. It is recommended to consult with a professional mechanic or auto repair shop to get an accurate estimate based on your vehicle's condition and location. Labor rates at auto repair shops can vary, so it's advisable to research local rates to get a more precise cost estimate.

When is the Code Detected?

An excessively high voltage from the Throttle Position Sensor (TPS) '1' is sent to Engine Control Module (ECM).

Need more information about the P0123 2008 Nissan Versa code?

Need more information on how to fix the P0123 2008 Nissan Versa code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0123 2008 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0123 2008 Nissan Versa Code

1. What are the common symptoms of OBDII code P0123 on a 2008 Nissan Versa?

- Common symptoms include the engine stalling, reduced fuel efficiency, hesitation or lack of response when pressing the gas pedal, and the check engine light illuminating.

2. What causes the Throttle Position Sensor/Switch '1' Circuit High Input error code on a 2008 Nissan Versa?

- The P0123 code is typically triggered by a faulty throttle position sensor, damaged wiring or connectors leading to the sensor, or issues with the throttle control system itself.

3. How can I diagnose the Throttle Position Sensor/Switch '1' Circuit High Input issue on my 2008 Nissan Versa?

- You can diagnose the problem by performing a visual inspection of the throttle position sensor and its wiring, using an OBDII scanner to retrieve the error code, and testing the sensor's voltage output with a multimeter.

4. Can I continue driving my 2008 Nissan Versa with the P0123 error code?

- It is not recommended to drive your vehicle with the P0123 code as it can lead to poor engine performance, potential stalling, and further damage to the engine or other components.

5. How do I repair the Throttle Position Sensor/Switch '1' Circuit High Input issue on my 2008 Nissan Versa?

- To repair the P0123 code, you may need to replace the throttle position sensor, repair any damaged wiring or connectors, clear the error code with an OBDII scanner, and test the system to ensure the problem is resolved.

6. Can a DIY enthusiast fix the P0123 error code on a 2008 Nissan Versa?

- Depending on your skill level and access to tools, a DIY enthusiast may be able to replace the throttle position sensor or repair wiring issues causing the P0123 code. However, complex diagnosis and repair may require professional assistance.

7. Will resetting the error code make the P0123 issue go away permanently?

- Simply resetting the error code without addressing the underlying cause, such as a faulty throttle position sensor, will not permanently resolve the P0123 issue. It is crucial to diagnose and fix the root problem.

8. How much does it cost to repair the Throttle Position Sensor/Switch '1' Circuit High Input error on a 2008 Nissan Versa?

- The cost of repairing the P0123 error can vary depending on the cause of the issue, labor rates in your area, and whether you choose to replace the sensor yourself or have a mechanic do the work. Costs may range from $100 to $300 or more.

9. Are there any preventive measures to avoid the P0123 error code on a 2008 Nissan Versa?

- To prevent the P0123 code, it's advisable to perform regular maintenance checks on your vehicle, including inspecting the throttle position sensor and related components, and addressing any issues promptly to avoid sensor failure.

Discuss the causes and fixes for P0123 2008 Nissan Versa OBDII Code

Submit a New Comment

Code P0123 2008 Nissan Versa comments

No comments found for this page.