P0122 2014 Toyota RAV4 Code - Throttle / Pedal Position Sensor / Switch 'A' Circuit Low Input
Quick Answer
The P0122 diagnostic trouble code (DTC) for a 2014 Toyota RAV4 indicates that there is a low input signal detected from the throttle/pedal position sensor or switch 'A' circuit. Common causes include Faulty throttle/pedal position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or poor connection in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2014 Toyota RAV4 indicates Throttle / Pedal Position Sensor / Switch 'A' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle/pedal position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or poor connection in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0122 2014 Toyota RAV4 Description
The P0122 diagnostic trouble code (DTC) for a 2014 Toyota RAV4 indicates that there is a low input signal detected from the throttle/pedal position sensor or switch 'A' circuit. This sensor is crucial for monitoring the position of the accelerator pedal and transmitting this information to the engine control module (ECM) to adjust fuel delivery and engine performance accordingly.
Common Causes of P0122 2014 Toyota RAV4
- Faulty throttle/pedal position sensor
- Damaged wiring or connectors in the sensor circuit
- Corrosion or poor connection in the sensor circuit
- ECM software issues
- Accelerator pedal assembly issues
Symptoms of P0122 2014 Toyota RAV4
- Illumination of the check engine light on the dashboard
- Reduced engine power or acceleration
- Hesitation or surging while driving
- Difficulty maintaining a consistent speed
- Stalling or rough idling
How to Fix P0122 2014 Toyota RAV4
- Begin by conducting a comprehensive diagnostic scan to confirm the P0122 code and identify the exact cause of the issue.
- Inspect the throttle/pedal position sensor and its wiring for any signs of damage, corrosion, or poor connections. Replace or repair as needed.
- Check the accelerator pedal assembly for proper operation and potential issues. Replace if necessary.
- Clear the DTC and reset the ECM to relearn the sensor's correct position and improve engine performance.
- Test drive the vehicle to ensure that the symptoms associated with the P0122 code have been resolved.
Cost to Fix P0122 2014 Toyota RAV4
The typical repair costs for addressing a P0122 code in a 2014 Toyota RAV4 can range from $150 to $400, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
Tech Notes for P0122 2014 Toyota RAV4
User Submitted Video
Need more information about the P0122 2014 Toyota RAV4 code?
Need more information on how to fix the P0122 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2014 Toyota RAV4 Code
Q: What does OBDII code P0122 mean on a 2014 Toyota RAV4?
A: Code P0122 indicates that the throttle or pedal position sensor "A" circuit is reporting a voltage input lower than expected.
Q: What are the common symptoms of code P0122 in a 2014 Toyota RAV4?
A: Symptoms may include reduced engine performance, rough idling, hesitation during acceleration, and the check engine light turning on.
Q: What causes code P0122 in a 2014 Toyota RAV4?
A: Common causes include a faulty throttle position sensor, damaged wiring or connectors, or issues with the engine control module (ECM).
Q: Can I drive my 2014 Toyota RAV4 with code P0122?
A: While it may still be drivable, driving with code P0122 can lead to poor engine performance and potential safety concerns. It’s best to address the issue promptly.
Q: How do you diagnose code P0122 in a 2014 Toyota RAV4?
A: Diagnosis typically involves using a scan tool to confirm the code, inspecting the throttle position sensor and wiring, and testing the sensor’s voltage output.
Q: How can code P0122 be fixed on a 2014 Toyota RAV4?
A: Repairs may include replacing the throttle position sensor, repairing damaged wiring or connectors, or recalibrating the ECM if necessary.
Q: How much does it cost to repair code P0122 on a 2014 Toyota RAV4?
A: Repair costs vary, but replacing a throttle position sensor typically ranges from $100 to $300, including parts and labor.
Q: Can a dirty throttle body cause code P0122 in a 2014 Toyota RAV4?
A: Yes, a dirty or clogged throttle body can affect the sensor’s readings and potentially trigger code P0122.
Q: Is it necessary to clear the code after fixing P0122 on a 2014 Toyota RAV4?
A: Yes, after repairs, the code should be cleared using a scan tool to ensure the issue has been resolved.
Q: Can low battery voltage trigger code P0122 in a 2014 Toyota RAV4?
A: Yes, low battery voltage can interfere with sensor readings and may contribute to the P0122 code.
Discuss the causes and fixes for P0122 2014 Toyota RAV4 OBDII Code
Code P0122 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.