P0122 2013 Toyota RAV4 Code - Throttle / Pedal Position Sensor / Switch 'A' Circuit Low Input
Quick Answer
The P0122 diagnostic trouble code (DTC) for a 2013 Toyota RAV4 refers to an issue with the Throttle/Pedal Position Sensor/Switch 'A' Circuit having a low input signal. Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2013 Toyota RAV4 indicates Throttle / Pedal Position Sensor / Switch 'A' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0122 2013 Toyota RAV4 Description
The P0122 diagnostic trouble code (DTC) for a 2013 Toyota RAV4 refers to an issue with the Throttle/Pedal Position Sensor/Switch 'A' Circuit having a low input signal. This sensor is crucial for the proper functioning of the vehicle's electronic throttle control system. The throttle position sensor (TPS) is responsible for monitoring the position of the throttle pedal and sending this information to the engine control module (ECM). The ECM uses this data to determine the appropriate fuel delivery and ignition timing for optimal engine performance.
Common Causes of P0122 2013 Toyota RAV4
- Faulty throttle position sensor
- Damaged wiring or connectors in the sensor circuit
- Corrosion or contamination in the sensor
- Issues with the ECM
- Electrical problems such as short circuits or open circuits
Symptoms of P0122 2013 Toyota RAV4
- Reduced engine power
- Rough idling or stalling
- Poor acceleration
- Illuminated check engine light
- Decreased fuel efficiency
How to Fix P0122 2013 Toyota RAV4
- Begin by conducting a thorough inspection of the throttle position sensor, wiring, and connectors for any visible damage or corrosion.
- Use a multimeter to test the throttle position sensor for proper voltage output according to manufacturer specifications.
- If the sensor is faulty, replace it with a new one and ensure proper calibration.
- Check and repair any damaged wiring or connectors in the sensor circuit.
- Clear the diagnostic trouble codes from the ECM and perform a test drive to verify that the issue has been resolved.
Cost to Fix P0122 2013 Toyota RAV4
The typical repair costs for addressing a P0122 code in a 2013 Toyota RAV4 can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor. It is important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. Rates may be higher at dealerships or in metropolitan areas, while independent shops may offer lower prices. It is advisable to obtain quotes from multiple sources to get a more accurate estimate for the repair.
Tech Notes for P0122 2013 Toyota RAV4
User Submitted Video
Need more information about the P0122 2013 Toyota RAV4 code?
Need more information on how to fix the P0122 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P0122 in a 2013 Toyota RAV4?
- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
2. What does the Throttle / Pedal Position Sensor / Switch 'A' Circuit Low Input mean in relation to OBDII code P0122 on a 2013 Toyota RAV4?
- It indicates that the voltage signal from the throttle position sensor (TPS) or accelerator pedal position sensor (APP) is lower than the expected range.
3. What are the possible causes of OBDII code P0122 in a 2013 Toyota RAV4?
- Causes may include a faulty TPS or APP sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
4. How can I diagnose the Throttle / Pedal Position Sensor / Switch 'A' Circuit Low Input issue in my 2013 Toyota RAV4?
- You can use a multimeter to test the TPS or APP sensor's voltage output, inspect the sensor wiring for damage, and check for any loose connections.
5. Can driving with OBDII code P0122 in a 2013 Toyota RAV4 cause further damage?
- Continuing to drive with this code may lead to poor engine performance, reduced fuel efficiency, and potential damage to other engine components over time.
6. Is it safe to ignore OBDII code P0122 in a 2013 Toyota RAV4?
- Ignoring this code can result in drivability issues and may lead to safety concerns on the road. It's recommended to address the underlying problem promptly.
7. How can I reset OBDII code P0122 in my 2013 Toyota RAV4?
- You can reset the code using an OBDII scanner or by disconnecting the car's battery for a few minutes. However, the code will likely return if the underlying issue is not fixed.
8. Can I repair OBDII code P0122 in a 2013 Toyota RAV4 myself?
- Depending on your mechanical skills and tools, you may be able to replace a faulty sensor or repair wiring issues yourself. However, complex diagnostics may require professional help.
9. Are there any preventative measures to avoid OBDII code P0122 in a 2013 Toyota RAV4?
- Regular maintenance, such as checking and cleaning sensor connectors, inspecting wiring harnesses, and using quality fuel, can help prevent issues leading to this code.
10. How much does it typically cost to repair OBDII code P0122 in a 2013 Toyota RAV4?
- The cost of repairs can vary based on the specific issue causing the code. Costs may include sensor replacement, wiring repairs, or ECM reprogramming, ranging from $100 to $500 or more.
Discuss the causes and fixes for P0122 2013 Toyota RAV4 OBDII Code
Code P0122 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.