P0122 2012 Ford Fusion Code - Throttle/Pedal Position Sensor 'A' Circuit Low Input
Quick Answer
The P0122 diagnostic trouble code (DTC) for a 2012 Ford Fusion indicates an issue with the Throttle/Pedal Position Sensor 'A' Circuit Low Input. Common causes include Faulty throttle/pedal position sensor, Wiring issues or poor connections in the sensor circuit, Corrosion or damage to sensor terminals. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2012 Ford Fusion indicates Throttle/Pedal Position Sensor 'A' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle/pedal position sensor, Wiring issues or poor connections in the sensor circuit, Corrosion or damage to sensor terminals.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0122 2012 Ford Fusion Description
The P0122 diagnostic trouble code (DTC) for a 2012 Ford Fusion indicates an issue with the Throttle/Pedal Position Sensor 'A' Circuit Low Input. This means that the Engine Control Module (ECM) has detected a lower than expected voltage signal from the throttle or pedal position sensor. The throttle/pedal position sensor is responsible for monitoring the position of the throttle pedal and sending this information to the ECM to adjust the engine's air-fuel mixture and ignition timing accordingly.
Common Causes of P0122 2012 Ford Fusion
- Faulty throttle/pedal position sensor
- Wiring issues or poor connections in the sensor circuit
- Corrosion or damage to sensor terminals
- ECM software or hardware issues
- Environmental factors such as moisture or debris affecting sensor operation
Symptoms of P0122 2012 Ford Fusion
- Rough idling
- Poor acceleration
- Stalling
- Inability to start
- Reduced fuel efficiency
How to Fix P0122 2012 Ford Fusion
- Perform a visual inspection of the throttle/pedal position sensor and wiring for any obvious signs of damage or corrosion.
- Test the sensor using a multimeter to check for proper voltage signals.
- Replace the throttle/pedal position sensor if it is found to be faulty.
- Repair any damaged or corroded wiring connections.
- Clear the DTC with a scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0122 2012 Ford Fusion
The cost of repairing a Throttle/Pedal Position Sensor 'A' Circuit Low Input issue on a 2012 Ford Fusion can vary depending on the specific cause of the problem and the extent of the repairs needed. In general, the cost of replacing a throttle/pedal position sensor can range from $100 to $300, including parts and labor. Additional costs may apply if wiring repairs or ECM diagnostics are required. It's advisable to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your specific situation. Labor rates at auto repair shops typically range from $80 to $150 per hour, but may vary based on location and other factors.
Tech Notes for P0122 2012 Ford Fusion
When is the Code Detected?
Need more information about the P0122 2012 Ford Fusion code?
Need more information on how to fix the P0122 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P0122 in a 2012 Ford Fusion?
The common symptoms of OBDII code P0122 in a 2012 Ford Fusion include reduced engine power, hesitation or stalling when accelerating, and illuminated Check Engine Light.
2. What does the OBDII code P0122 indicate in a 2012 Ford Fusion?
OBDII code P0122 in a 2012 Ford Fusion indicates a Throttle/Pedal Position Sensor 'A' Circuit Low Input, meaning the sensor is reporting a lower voltage signal than expected.
3. What are the possible causes of OBDII code P0122 in a 2012 Ford Fusion?
The possible causes of OBDII code P0122 in a 2012 Ford Fusion include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the Engine Control Module (ECM).
4. How can I diagnose the cause of OBDII code P0122 in my 2012 Ford Fusion?
To diagnose the cause of OBDII code P0122 in a 2012 Ford Fusion, you can use a scan tool to check for any other related trouble codes, visually inspect the throttle position sensor and its wiring, and perform voltage tests on the sensor.
5. Can I continue driving my 2012 Ford Fusion with OBDII code P0122?
It is not recommended to continue driving your 2012 Ford Fusion with OBDII code P0122, as it can lead to poor engine performance, reduced fuel efficiency, and potential safety risks due to unexpected stalling.
6. How can I repair OBDII code P0122 in my 2012 Ford Fusion?
To repair OBDII code P0122 in a 2012 Ford Fusion, you may need to replace the throttle position sensor, repair any damaged wiring or connectors, or reprogram the Engine Control Module (ECM) if necessary.
7. Is it possible to reset OBDII code P0122 in a 2012 Ford Fusion by disconnecting the battery?
While disconnecting the battery may temporarily clear the trouble code, it is recommended to diagnose and repair the underlying issue causing OBDII code P0122 in a 2012 Ford Fusion to prevent it from reoccurring.
8. How much does it cost to fix OBDII code P0122 in a 2012 Ford Fusion?
The cost of fixing OBDII code P0122 in a 2012 Ford Fusion can vary depending on the cause of the issue, parts needed for repair, and labor costs at a repair shop. It is advisable to get a diagnosis and estimate from a qualified mechanic.
9. Can a DIY enthusiast fix OBDII code P0122 in a 2012 Ford Fusion?
A DIY enthusiast with proper tools and knowledge of automotive systems may be able to fix OBDII code P0122 in a 2012 Ford Fusion by following repair guides or tutorials specific to the throttle position sensor and related components.
10. How can I prevent OBDII code P0122 from appearing in my 2012 Ford Fusion in the future?
To prevent OBDII code P0122 from appearing in your 2012 Ford Fusion in the future, you can regularly inspect and maintain the throttle position sensor and its wiring, avoid rough driving that can damage sensor components, and address any engine performance issues promptly.
Discuss the causes and fixes for P0122 2012 Ford Fusion OBDII Code
Code P0122 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.