Engine-CodesNissan – P0122 2011 Nissan Sentra

P0122 2011 Nissan Sentra Code - Throttle Position Sensor/Switch 'A' Circuit Low Input

Quick Answer

The P0122 code for a 2011 Nissan Sentra indicates a problem with the Throttle Position Sensor/Switch 'A' Circuit, specifically a low input signal. Common causes include Faulty throttle position sensor, Wiring issues or poor connections in the TPS circuit, Corrosion or contamination in the TPS sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0122 2011 Nissan Sentra indicates Throttle Position Sensor/Switch 'A' Circuit Low Input.
Common causes
Common causes include Faulty throttle position sensor, Wiring issues or poor connections in the TPS circuit, Corrosion or contamination in the TPS sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0122 2011 Nissan Sentra Description

The P0122 code for a 2011 Nissan Sentra indicates a problem with the Throttle Position Sensor/Switch 'A' Circuit, specifically a low input signal. The throttle position sensor (TPS) is a crucial component of the vehicle's electronic control system, as it monitors the position of the throttle valve and sends this information to the engine control module (ECM). The ECM uses this data to determine the appropriate air-fuel mixture for optimal engine performance.

OBDII Code P0122 2011 Nissan Sentra - Throttle Position Sensor/Switch 'A' Circuit Low Input
P0122 2011 Nissan Sentra Code - Throttle Position Sensor/Switch 'A' Circuit Low Input

Common Causes of P0122 2011 Nissan Sentra

  1. Faulty throttle position sensor
  2. Wiring issues or poor connections in the TPS circuit
  3. Corrosion or contamination in the TPS sensor
  4. ECM software or hardware issues
  5. Mechanical problems with the throttle body

Symptoms of P0122 2011 Nissan Sentra

  1. Rough idling or stalling
  2. Lack of power or acceleration
  3. Poor fuel efficiency
  4. Check Engine Light illuminated
  5. Limp mode activation

How to Fix P0122 2011 Nissan Sentra

  1. Begin by diagnosing the TPS using a multimeter to test for proper voltage output.
  2. Inspect the wiring and connectors for any signs of damage, corrosion, or loose connections.
  3. Replace the throttle position sensor if it is found to be faulty.
  4. Clear the diagnostic trouble codes and reset the ECM to see if the issue persists.
  5. Test drive the vehicle to ensure that the problem has been resolved and that the TPS is functioning correctly.

Cost to Fix P0122 2011 Nissan Sentra

The cost of repairing a P0122 code on a 2011 Nissan Sentra can vary depending on the specific cause of the issue. In general, the price of a new throttle position sensor ranges from $50 to $150, while labor costs can range from $100 to $200. Overall, the total repair cost for this issue could be around $150 to $350, including parts and labor. It is important to note that diagnostic time and labor rates at auto repair shops can vary, so it is advisable to check with local shops for a more accurate estimate.

When is the Code Detected?

An excessively low voltage from the Throttle Position Sensor (TPS) is sent to Engine Control Module (ECM).

Need more information about the P0122 2011 Nissan Sentra code?

Need more information on how to fix the P0122 2011 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0122 2011 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0122 2011 Nissan Sentra Code

1. What are the common symptoms of OBDII code P0122 in a 2011 Nissan Sentra?

- Common symptoms include reduced engine power, poor acceleration, stalling, and difficulty maintaining a consistent speed.

2. What does the OBDII code P0122 indicate in a 2011 Nissan Sentra?

- The code indicates an issue with the Throttle Position Sensor/Switch 'A' Circuit, specifically a low input signal.

3. What are the possible causes of OBDII code P0122 in a 2011 Nissan Sentra?

- Possible causes include a faulty throttle position sensor, damaged wiring or connectors, a malfunctioning throttle body, or issues with the engine control module (ECM).

4. How can I diagnose the Throttle Position Sensor/Switch 'A' Circuit low input issue in my 2011 Nissan Sentra?

- You can use a scan tool to check for the P0122 code, visually inspect the throttle position sensor and its wiring, and perform voltage tests to determine the source of the low input signal.

5. Can I continue driving my 2011 Nissan Sentra with OBDII code P0122?

- It is not recommended to drive your vehicle with this code as it can lead to further engine performance issues and potentially cause safety concerns.

6. How can I repair OBDII code P0122 in my 2011 Nissan Sentra?

- Repair options include replacing the throttle position sensor, repairing or replacing damaged wiring, cleaning the throttle body, or reprogramming the engine control module.

7. Is it possible to reset the OBDII code P0122 in a 2011 Nissan Sentra without fixing the underlying issue?

- While you can clear the code temporarily, it is essential to address the root cause to prevent the issue from recurring.

8. Are there any DIY tips for troubleshooting OBDII code P0122 in a 2011 Nissan Sentra?

- DIY tips include checking for loose or damaged wiring, cleaning the throttle body, and ensuring proper connections to the throttle position sensor.

9. Can a dirty throttle body cause OBDII code P0122 in a 2011 Nissan Sentra?

- Yes, a dirty throttle body can disrupt the throttle position sensor's operation and lead to a low input signal, triggering the P0122 code.

10. How much does it typically cost to repair OBDII code P0122 in a 2011 Nissan Sentra?

- The cost of repair can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.

Discuss the causes and fixes for P0122 2011 Nissan Sentra OBDII Code

Code P0122 2011 Nissan Sentra comments

No comments found for this page.