P0122 2009 Nissan Versa Code - Throttle Position Sensor/Switch '1' Circuit Low Input
Quick Answer
The P0122 diagnostic trouble code (DTC) for a 2009 Nissan Versa indicates an issue with the Throttle Position Sensor/Switch '1' Circuit, specifically a low input signal. Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Corrosion or poor connections in the TPS circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2009 Nissan Versa indicates Throttle Position Sensor/Switch '1' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Corrosion or poor connections in the TPS circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0122 2009 Nissan Versa Description
The P0122 diagnostic trouble code (DTC) for a 2009 Nissan Versa indicates an issue with the Throttle Position Sensor/Switch '1' Circuit, specifically a low input signal. The throttle position sensor (TPS) is a crucial component in the vehicle's electronic fuel injection system, as it monitors the position of the throttle valve and sends this information to the engine control module (ECM). The ECM uses this data to determine the appropriate air-fuel mixture for optimal engine performance and efficiency.
Common Causes of P0122 2009 Nissan Versa
- Faulty throttle position sensor
- Damaged wiring or connectors in the TPS circuit
- Corrosion or poor connections in the TPS circuit
- Issues with the engine control module (ECM)
- Environmental factors such as moisture or debris affecting the TPS
Symptoms of P0122 2009 Nissan Versa
- Poor acceleration and throttle response
- Rough idling or stalling
- Difficulty starting the vehicle
- Reduced fuel efficiency
- Illumination of the Check Engine Light
How to Fix P0122 2009 Nissan Versa
- Begin by diagnosing the issue using a scan tool to confirm the P0122 code and identify the specific TPS '1' circuit causing the low input signal.
- Inspect the wiring and connectors in the TPS circuit for any damage, corrosion, or poor connections. Repair or replace as needed.
- Test the throttle position sensor using a multimeter to ensure it is functioning properly. Replace the sensor if it is faulty.
- Clear the DTC and reset the ECM to see if the issue persists. Test drive the vehicle to confirm that the symptoms have been resolved.
- If the problem persists, further diagnostics may be necessary to identify any underlying issues with the ECM or other related components.
Cost to Fix P0122 2009 Nissan Versa
The typical repair costs for addressing a P0122 code on a 2009 Nissan Versa can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor. This estimate includes the price of a new throttle position sensor, wiring repairs, and diagnostic time. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle specifics.
When is the Code Detected?
Need more information about the P0122 2009 Nissan Versa code?
Need more information on how to fix the P0122 2009 Nissan Versa code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2009 Nissan Versa code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2009 Nissan Versa Code
1. What are the common symptoms of OBDII code P0122 on a 2009 Nissan Versa?
- Common symptoms include poor acceleration, stalling, rough idling, and a decrease in fuel efficiency.
2. What does the OBDII code P0122 indicate on a 2009 Nissan Versa?
- OBDII code P0122 indicates an issue with the Throttle Position Sensor/Switch '1' Circuit having a low input.
3. What are the possible causes of OBDII code P0122 on a 2009 Nissan Versa?
- Possible causes include a faulty throttle position sensor, damaged wiring or connectors, a malfunctioning throttle body, or issues with the engine control module (ECM).
4. How can I diagnose the OBDII code P0122 on my 2009 Nissan Versa?
- Diagnosis typically involves checking the throttle position sensor's voltage using a multimeter, inspecting the wiring and connectors for damage, and testing the throttle body for proper functionality.
5. Can I drive my 2009 Nissan Versa with OBDII code P0122?
- It is not recommended to drive your vehicle with OBDII code P0122 as it can lead to performance issues and potential safety hazards.
6. How can I repair OBDII code P0122 on my 2009 Nissan Versa?
- Repairing OBDII code P0122 may involve replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, cleaning or replacing the throttle body, or reprogramming the ECM.
7. Will resetting the OBDII code P0122 on my 2009 Nissan Versa make it go away permanently?
- Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the code is not addressed, it is likely to reappear.
8. How much does it cost to fix OBDII code P0122 on a 2009 Nissan Versa?
- The cost of fixing OBDII code P0122 can vary depending on the specific cause of the issue and labor rates in your area. It is recommended to get a diagnosis from a professional technician for an accurate estimate.
9. Can a DIY enthusiast repair OBDII code P0122 on a 2009 Nissan Versa?
- Depending on your mechanical skills and access to tools, some DIY enthusiasts may be able to repair OBDII code P0122 by following repair guides or tutorials. However, it is recommended to seek professional help if unsure.
10. How long does it typically take to repair OBDII code P0122 on a 2009 Nissan Versa?
- The repair time for OBDII code P0122 can vary depending on the specific cause of the issue and the expertise of the technician. It can range from a few hours to a full day in some cases.
Discuss the causes and fixes for P0122 2009 Nissan Versa OBDII Code
Code P0122 2009 Nissan Versa comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.