P0122 2008 Nissan Rogue Code - Throttle Position Sensor/Switch '1' Circuit Low Input
Quick Answer
The diagnostic trouble code P0122 in a 2008 Nissan Rogue indicates an issue with the Throttle Position Sensor/Switch '1' Circuit, specifically a low input signal. Common causes include The following are some common causes that could trigger the P0122 code in a 2008 Nissan Rogue:, Faulty throttle position sensor: The TPS may be worn out, damaged, or malfunctioning, leading to inaccurate readings and triggering the code, Wiring issues: Damaged or corroded wiring connections between the TPS and ECM can disrupt the signal transmission, causing a low input voltage. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2008 Nissan Rogue indicates Throttle Position Sensor/Switch '1' Circuit Low Input.
- Common causes
- Common causes include The following are some common causes that could trigger the P0122 code in a 2008 Nissan Rogue:, Faulty throttle position sensor: The TPS may be worn out, damaged, or malfunctioning, leading to inaccurate readings and triggering the code, Wiring issues: Damaged or corroded wiring connections between the TPS and ECM can disrupt the signal transmission, causing a low input voltage.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0122 2008 Nissan Rogue Description
The diagnostic trouble code P0122 in a 2008 Nissan Rogue indicates an issue with the Throttle Position Sensor/Switch '1' Circuit, specifically a low input signal. The throttle position sensor (TPS) is a vital component of the vehicle's electronic fuel injection system, as it monitors the position of the throttle valve and sends this information to the engine control module (ECM). The ECM uses this data to determine the appropriate air-fuel mixture for optimal engine performance and efficiency.
Common Causes of P0122 2008 Nissan Rogue
The following are some common causes that could trigger the P0122 code in a 2008 Nissan Rogue:
- Faulty throttle position sensor: The TPS may be worn out, damaged, or malfunctioning, leading to inaccurate readings and triggering the code.
- Wiring issues: Damaged or corroded wiring connections between the TPS and ECM can disrupt the signal transmission, causing a low input voltage.
- Poor electrical connection: Loose or poor connections at the TPS or ECM can result in erratic voltage signals, leading to the code.
- Throttle body issues: A dirty or malfunctioning throttle body can affect the TPS readings, causing the low input signal.
- ECM problems: A faulty engine control module could also be the culprit behind the P0122 code, as it may not be receiving or interpreting the TPS data correctly.
Symptoms of P0122 2008 Nissan Rogue
The following are some possible symptoms that could be associated with the P0122 code:
- Rough idling: The engine may idle erratically or inconsistently, causing vibrations and noise.
- Hesitation during acceleration: The vehicle may struggle to accelerate smoothly or respond sluggishly to throttle input.
- Stalling: The engine may stall unexpectedly, especially when coming to a stop or at low speeds.
- Poor fuel economy: The vehicle may consume more fuel than usual due to the inefficient air-fuel mixture.
- Check Engine Light: The Check Engine Light may illuminate on the dashboard, indicating a fault with the TPS circuit.
How to Fix P0122 2008 Nissan Rogue
To resolve the P0122 code in a 2008 Nissan Rogue, the following steps can be taken:
- Diagnose the issue: Use an OBD-II scanner to retrieve the trouble code and perform a thorough inspection of the TPS, wiring, and connections.
- Test the throttle position sensor: Check the TPS for proper operation using a multimeter to measure voltage output at various throttle positions.
- Inspect wiring and connections: Verify the integrity of the wiring harness and connectors for any damage, corrosion, or loose connections.
- Clean or replace throttle body: Clean the throttle body to remove any carbon buildup or debris that could affect TPS readings. If necessary, replace the throttle body.
- Replace faulty components: If the throttle position sensor or ECM is found to be faulty, replace the defective component with a new one to restore proper function.
Cost to Fix P0122 2008 Nissan Rogue
The cost of repairing a Throttle Position Sensor/Switch '1' Circuit Low Input issue in a 2008 Nissan Rogue can vary depending on the specific cause of the problem and the labor rates at the auto repair shop. Generally, the cost of replacing a throttle position sensor ranges from $50 to $200, while the cost of a new throttle body can range from $200 to $500. Labor costs can add an additional $100 to $300, depending on the complexity of the repair.
Tech Notes for P0122 2008 Nissan Rogue
When is the Code Detected?
Need more information about the P0122 2008 Nissan Rogue code?
Need more information on how to fix the P0122 2008 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2008 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0122 in a 2008 Nissan Rogue?
- Common symptoms include poor acceleration, rough idling, stalling, and the Check Engine light being illuminated.
2. What does the OBDII code P0122 'Throttle Position Sensor/Switch '1' Circuit Low Input' mean for a 2008 Nissan Rogue?
- This code indicates that the Engine Control Module (ECM) has detected a low voltage signal from the throttle position sensor.
3. What are the possible causes of OBDII code P0122 in a 2008 Nissan Rogue?
- Possible causes include a faulty throttle position sensor, corroded wiring or connectors, a damaged throttle body, or issues with the ECM.
4. How can I diagnose the cause of OBDII code P0122 in my 2008 Nissan Rogue?
- You can use a multimeter to test the throttle position sensor's voltage output, inspect the wiring and connectors for damage, and perform a visual inspection of the throttle body.
5. Is it safe to continue driving with OBDII code P0122 in a 2008 Nissan Rogue?
- It is not recommended to drive with this code present, as it can lead to poor engine performance and potential safety hazards.
6. Can I reset the OBDII code P0122 in my 2008 Nissan Rogue by disconnecting the battery?
- Disconnecting the battery may temporarily clear the code, but it is essential to diagnose and address the underlying issue to prevent the code from reoccurring.
7. How much does it typically cost to repair OBDII code P0122 in a 2008 Nissan Rogue?
- The cost of repair can vary depending on the exact cause of the code, but it may range from $100 to $300 or more, including parts and labor.
8. Can a DIY enthusiast fix OBDII code P0122 in a 2008 Nissan Rogue?
- Depending on the skill level and access to tools, some DIY enthusiasts may be able to replace the throttle position sensor or address wiring issues themselves.
9. Will OBDII code P0122 cause my 2008 Nissan Rogue to fail an emissions test?
- Yes, the presence of this code may cause your vehicle to fail an emissions test due to the impact on engine performance and emissions control systems.
10. How urgent is it to address OBDII code P0122 in a 2008 Nissan Rogue?
- It is recommended to address this code promptly to prevent further damage to the engine and ensure optimal vehicle performance and safety.
Discuss the causes and fixes for P0122 2008 Nissan Rogue OBDII Code
Code P0122 2008 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.