Engine-Codes.com
Engine-Codes – Toyota – P0122 2006 Toyota Corolla

P0122 2006 Toyota Corolla Code - Throttle Position Sensor/Switch 'A' Circuit Low Input 3ZZ-FE Engine

Quick Answer

The P0122 diagnostic trouble code (DTC) for a 2006 Toyota Corolla with the 3ZZ-FE engine indicates a problem with the Throttle Position Sensor/Switch 'A' Circuit, specifically a low input signal. Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Corroded or dirty throttle body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0122 2006 Toyota Corolla indicates Throttle Position Sensor/Switch 'A' Circuit Low Input 3ZZ-FE Engine.
Common causes
Common causes include Faulty throttle position sensor, Damaged wiring or connectors in the TPS circuit, Corroded or dirty throttle body.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0122 2006 Toyota Corolla Description

The P0122 diagnostic trouble code (DTC) for a 2006 Toyota Corolla with the 3ZZ-FE engine indicates a problem with the Throttle Position Sensor/Switch 'A' Circuit, specifically a low input signal. The throttle position sensor (TPS) is a crucial component of the engine management system, as it monitors the position of the throttle valve and sends this information to the engine control module (ECM). The ECM uses this data to adjust fuel delivery and ignition timing, optimizing engine performance and fuel efficiency.

OBDII Code P0122 2006 Toyota Corolla - Throttle Position Sensor/Switch 'A' Circuit Low Input 3ZZ-FE Engine
P0122 2006 Toyota Corolla Code - Throttle Position Sensor/Switch 'A' Circuit Low Input 3ZZ-FE Engine

Common Causes of P0122 2006 Toyota Corolla

  1. Faulty throttle position sensor
  2. Damaged wiring or connectors in the TPS circuit
  3. Corroded or dirty throttle body
  4. Issues with the engine control module (ECM)
  5. Electrical problems such as a short circuit or open circuit in the TPS circuit

Symptoms of P0122 2006 Toyota Corolla

  1. Rough idling or fluctuating idle speed
  2. Stalling or hesitation during acceleration
  3. Poor fuel economy
  4. Difficulty starting the engine
  5. Limp mode activation

How to Fix P0122 2006 Toyota Corolla

  1. Begin by conducting a thorough inspection of the throttle position sensor, wiring, and connectors for any visible damage or corrosion.
  2. Test the throttle position sensor using a multimeter to check for proper voltage output and resistance values.
  3. Clean the throttle body to ensure smooth operation and eliminate any potential obstructions.
  4. If the TPS is determined to be faulty, replace it with a new, OEM-quality sensor.
  5. Clear the diagnostic trouble codes from the ECM and perform a test drive to verify that the issue has been resolved.

Cost to Fix P0122 2006 Toyota Corolla

The typical repair costs for addressing a P0122 code on a 2006 Toyota Corolla with the 3ZZ-FE engine can range from $100 to $300, depending on the cost of the throttle position sensor and any additional parts or labor required. It's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates typically range between $80 and $150 per hour, with variations in metropolitan areas, dealerships, and independent shops. It's recommended to obtain quotes from local shops for a more accurate estimate.

When is the Code Detected?

An excessively low voltage from the Throttle Position Sensor (TPS) is sent to Engine Control Module (ECM).

Need more information about the P0122 2006 Toyota Corolla code?

Need more information on how to fix the P0122 2006 Toyota Corolla code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0122 2006 Toyota Corolla code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0122 2006 Toyota Corolla Code

1. What are the common symptoms of OBDII code P0122 in a 2006 Toyota Corolla?

The common symptoms of OBDII code P0122 in a 2006 Toyota Corolla include poor acceleration, sluggish throttle response, and potentially stalling or rough idling.

2. What does the OBDII code P0122 indicate in a 2006 Toyota Corolla?

OBDII code P0122 in a 2006 Toyota Corolla indicates a Throttle Position Sensor/Switch 'A' Circuit Low Input issue related to the 3ZZ-FE engine.

3. What are the possible causes of OBDII code P0122 in a 2006 Toyota Corolla?

Possible causes of OBDII code P0122 in a 2006 Toyota Corolla include a faulty throttle position sensor, damaged wiring or connectors, or issues with the engine control module (ECM).

4. How can I diagnose the OBDII code P0122 in my 2006 Toyota Corolla?

To diagnose OBDII code P0122 in a 2006 Toyota Corolla, you can use an OBDII scanner to read the code, visually inspect the throttle position sensor and related wiring, and perform voltage tests to check sensor functionality.

5. Is it safe to continue driving with OBDII code P0122 in a 2006 Toyota Corolla?

It is not recommended to continue driving with OBDII code P0122 in a 2006 Toyota Corolla as it can lead to poor engine performance and potential safety issues due to erratic throttle response.

6. Can I reset the OBDII code P0122 in a 2006 Toyota Corolla by disconnecting the battery?

While disconnecting the battery may clear the code temporarily, it is important to address the underlying issue causing OBDII code P0122 in a 2006 Toyota Corolla to prevent it from reoccurring.

7. How can I repair OBDII code P0122 in my 2006 Toyota Corolla?

To repair OBDII code P0122 in a 2006 Toyota Corolla, you may need to replace the throttle position sensor, repair damaged wiring or connectors, or reset the ECM after addressing the root cause.

8. Can a DIY enthusiast fix OBDII code P0122 in a 2006 Toyota Corolla?

Depending on their skill level and access to tools, a DIY enthusiast may be able to fix OBDII code P0122 in a 2006 Toyota Corolla by following a repair manual or seeking guidance from online resources.

9. How much does it typically cost to repair OBDII code P0122 in a 2006 Toyota Corolla at a professional mechanic?

The cost to repair OBDII code P0122 in a 2006 Toyota Corolla at a professional mechanic can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

10. Are there any recalls or technical service bulletins related to OBDII code P0122 in a 2006 Toyota Corolla?

It is advisable to check with a Toyota dealership or online resources for any recalls or technical service bulletins related to OBDII code P0122 in a 2006 Toyota Corolla to see if there are any known issues or solutions provided by the manufacturer.

Discuss the causes and fixes for P0122 2006 Toyota Corolla OBDII Code

Submit a New Comment

Code P0122 2006 Toyota Corolla comments

No comments found for this page.