P0118 2013 Nissan Rogue Code - Engine Coolant Temperature Sensor Circuit High
Quick Answer
The P0118 code on a 2013 Nissan Rogue indicates a problem with the Engine Coolant Temperature (ECT) Sensor Circuit. Common causes include Faulty ECT sensor: The most common cause of the P0118 code is a malfunctioning ECT sensor, Over time, the sensor may become inaccurate or fail completely, Wiring issues: Damage or corrosion to the wiring connected to the ECT sensor can cause a high signal to be sent to the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0118 2013 Nissan Rogue indicates Engine Coolant Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty ECT sensor: The most common cause of the P0118 code is a malfunctioning ECT sensor, Over time, the sensor may become inaccurate or fail completely, Wiring issues: Damage or corrosion to the wiring connected to the ECT sensor can cause a high signal to be sent to the ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0118 2013 Nissan Rogue Description
The P0118 code on a 2013 Nissan Rogue indicates a problem with the Engine Coolant Temperature (ECT) Sensor Circuit. This sensor is responsible for monitoring the temperature of the engine coolant and sending the information to the engine control module (ECM). When the ECM detects that the signal from the ECT sensor is higher than expected, it triggers this code. A high signal typically indicates that the engine coolant temperature is too high, which can lead to various issues with engine performance and efficiency.
Common Causes of P0118 2013 Nissan Rogue
- Faulty ECT sensor: The most common cause of the P0118 code is a malfunctioning ECT sensor. Over time, the sensor may become inaccurate or fail completely.
- Wiring issues: Damage or corrosion to the wiring connected to the ECT sensor can cause a high signal to be sent to the ECM.
- Coolant level: A low coolant level or air pockets in the cooling system can affect the ECT sensor's readings.
- Thermostat issues: A malfunctioning thermostat can cause the engine coolant temperature to rise, triggering the P0118 code.
- ECM failure: In rare cases, a problem with the engine control module itself may be the cause of the high engine coolant temperature sensor circuit.
Symptoms of P0118 2013 Nissan Rogue
- Engine overheating: One of the most common symptoms associated with a high engine coolant temperature sensor circuit is engine overheating. If the sensor is sending inaccurate signals to the ECM, the engine may not receive the correct cooling commands, leading to overheating.
- Poor fuel efficiency: Incorrect engine coolant temperature readings can cause the ECM to adjust the fuel mixture excessively, resulting in poor fuel efficiency.
- Check Engine Light: The illumination of the check engine light on the dashboard is a common indicator of this code being triggered.
- Rough idling or stalling: An improperly functioning ECT sensor can cause the engine to run erratically, leading to rough idling or stalling.
- Difficulty starting the engine: In some cases, a faulty ECT sensor can prevent the engine from starting or cause extended cranking times.
How to Fix P0118 2013 Nissan Rogue
- Diagnose the issue: Use a diagnostic scanner to read the code and further investigate the ECT sensor and its wiring for any visible damage or issues.
- Replace the ECT sensor: If the sensor is faulty, it will need to be replaced with a new one. Ensure the new sensor is compatible with your Nissan Rogue model.
- Check wiring and connections: Inspect the wiring harness and connections for any damage or corrosion. Repair or replace any damaged components.
- Test the cooling system: Check the coolant level and pressure, bleed air from the system, and ensure the thermostat is functioning correctly.
- Clear the code: Once the repairs have been completed, clear the code using the diagnostic scanner to reset the ECM and turn off the check engine light.
Cost to Fix P0118 2013 Nissan Rogue
The cost of repairing a high engine coolant temperature sensor circuit can vary depending on the specific cause of the issue and the cost of parts and labor. In general, replacing the ECT sensor can range from $50 to $150, while addressing wiring or thermostat problems may increase the total cost. Labor rates at auto repair shops typically range from $80 to $150 per hour, with dealerships and metropolitan areas often charging higher rates. It is recommended to get a specific estimate from a local auto repair shop to determine the exact cost for your 2013 Nissan Rogue.
Tech Notes for P0118 2013 Nissan Rogue
When is the Code Detected?
Need more information about the P0118 2013 Nissan Rogue code?
Need more information on how to fix the P0118 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0118 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0118 2013 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0118 in a 2013 Nissan Rogue?
The common symptoms of code P0118 in a 2013 Nissan Rogue include engine overheating, rough idling, poor fuel economy, and the Check Engine light illuminating on the dashboard.
2. What can cause the OBDII code P0118 in a 2013 Nissan Rogue?
The most common cause of code P0118 in a 2013 Nissan Rogue is a faulty engine coolant temperature sensor or a problem with the sensor's circuit, which leads to incorrect temperature readings.
3. How does a high engine coolant temperature sensor circuit affect the performance of a 2013 Nissan Rogue?
A high engine coolant temperature sensor circuit can cause the engine to run too hot or too cold, leading to potential engine damage, decreased fuel efficiency, and poor overall performance in a 2013 Nissan Rogue.
4. How can I diagnose the issue related to OBDII code P0118 in my 2013 Nissan Rogue?
To diagnose the issue related to code P0118, you can start by checking the engine coolant level, visually inspecting the sensor and its wiring for any damage, and using an OBDII scanner to monitor the sensor's readings.
5. Can I still drive my 2013 Nissan Rogue with OBDII code P0118?
It is not recommended to drive your 2013 Nissan Rogue with code P0118 for an extended period as it can lead to engine overheating and potential damage. It's best to address the issue promptly.
6. Is it possible to repair the high engine coolant temperature sensor circuit issue in a 2013 Nissan Rogue myself?
While some DIY enthusiasts may attempt to replace the engine coolant temperature sensor or repair the circuit themselves, it is advisable to seek professional help to ensure proper diagnosis and repair of the issue.
7. How much does it typically cost to repair OBDII code P0118 in a 2013 Nissan Rogue?
The cost of repairing code P0118 in a 2013 Nissan Rogue can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor at a repair shop.
8. Can a malfunctioning engine coolant temperature sensor affect other systems in a 2013 Nissan Rogue?
Yes, a malfunctioning engine coolant temperature sensor can potentially affect other systems in a 2013 Nissan Rogue, such as the fuel injection system, emission controls, and overall engine performance.
9. What are some preventive maintenance tips to avoid encountering OBDII code P0118 in a 2013 Nissan Rogue?
To prevent issues related to code P0118, it's essential to maintain regular coolant system inspections, replace the engine coolant temperature sensor as recommended by the manufacturer, and address any cooling system problems promptly.
10. How urgent is it to address OBDII code P0118 in a 2013 Nissan Rogue?
It is important to address code P0118 promptly in a 2013 Nissan Rogue to prevent potential engine damage, overheating, and further performance issues. Ignoring the code can lead to more costly repairs in the long run.
Discuss the causes and fixes for P0118 2013 Nissan Rogue OBDII Code
Code P0118 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.