Engine-Codes.com
Engine-Codes – Nissan – P0117 2013 Nissan Rogue

P0117 2013 Nissan Rogue Code - Engine Coolant Temperature Circuit Low

Quick Answer

The P0117 diagnostic trouble code (DTC) for a 2013 Nissan Rogue indicates a problem with the Engine Coolant Temperature (ECT) sensor circuit registering a low voltage. Common causes include Faulty ECT Sensor: The ECT sensor itself may be malfunctioning, providing inaccurate temperature readings, Damaged Wiring or Connectors: Corrosion, fraying, or damage to the wiring or connectors in the ECT circuit can disrupt the signal to the ECM, ECM Malfunction: A problem with the engine control module (ECM) can also trigger the P0117 code by not properly interpreting the ECT sensor data. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0117 2013 Nissan Rogue indicates Engine Coolant Temperature Circuit Low.
Common causes
Common causes include Faulty ECT Sensor: The ECT sensor itself may be malfunctioning, providing inaccurate temperature readings, Damaged Wiring or Connectors: Corrosion, fraying, or damage to the wiring or connectors in the ECT circuit can disrupt the signal to the ECM, ECM Malfunction: A problem with the engine control module (ECM) can also trigger the P0117 code by not properly interpreting the ECT sensor data.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0117 2013 Nissan Rogue Description

The P0117 diagnostic trouble code (DTC) for a 2013 Nissan Rogue indicates a problem with the Engine Coolant Temperature (ECT) sensor circuit registering a low voltage. The ECT sensor is responsible for measuring the temperature of the engine coolant and sending this information to the engine control module (ECM). The ECM uses this data to adjust fuel delivery and ignition timing for optimal engine performance and emissions control. When the ECT sensor circuit registers a low voltage, it can lead to inaccurate temperature readings, which may result in poor engine performance, reduced fuel efficiency, and potential damage to the engine if not addressed promptly.

OBDII Code P0117 2013 Nissan Rogue - Engine Coolant Temperature Circuit Low
P0117 2013 Nissan Rogue Code - Engine Coolant Temperature Circuit Low

Common Causes of P0117 2013 Nissan Rogue

  1. Faulty ECT Sensor: The ECT sensor itself may be malfunctioning, providing inaccurate temperature readings.
  2. Damaged Wiring or Connectors: Corrosion, fraying, or damage to the wiring or connectors in the ECT circuit can disrupt the signal to the ECM.
  3. ECM Malfunction: A problem with the engine control module (ECM) can also trigger the P0117 code by not properly interpreting the ECT sensor data.
  4. Coolant Leak: A coolant leak can affect the ECT sensor's ability to accurately measure coolant temperature, leading to a low voltage reading.
  5. Thermostat Stuck Open: A thermostat that is stuck open can cause the engine to run cooler than normal, triggering the P0117 code.

Symptoms of P0117 2013 Nissan Rogue

  1. Check Engine Light: The most common symptom associated with the P0117 code is the illumination of the check engine light on the vehicle's dashboard.
  2. Engine Overheating: A malfunctioning ECT sensor may provide inaccurate temperature readings, leading to engine overheating.
  3. Poor Fuel Economy: Incorrect coolant temperature readings can result in improper fuel delivery, leading to decreased fuel efficiency.
  4. Rough Idle: The engine may experience rough idling or stalling due to incorrect temperature data affecting fuel delivery and ignition timing.
  5. Hard Starting: A faulty ECT sensor can cause difficulty starting the engine, especially in cold weather conditions.

How to Fix P0117 2013 Nissan Rogue

  1. Diagnose the Issue: Use a scan tool to read the DTC and perform a visual inspection of the ECT sensor, wiring, and connectors to identify any obvious issues.
  2. Test the ECT Sensor: Check the ECT sensor's resistance with a multimeter at different temperatures to determine if it is functioning correctly.
  3. Inspect Wiring and Connectors: Check for any damage, corrosion, or loose connections in the ECT circuit and repair or replace as needed.
  4. Replace ECT Sensor: If the ECT sensor is faulty, replace it with a new sensor following the manufacturer's recommendations.
  5. Clear DTC and Test Drive: Clear the DTC with a scan tool after completing the repair, and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0117 2013 Nissan Rogue

The cost of repairing a P0117 code on a 2013 Nissan Rogue can vary depending on the specific cause of the issue. In general, the cost of parts for a new ECT sensor can range from $20 to $50, while labor costs at an auto repair shop can range from $80 to $150 per hour. The total repair cost, including parts and labor, may range from $100 to $300. It is important to note that these are rough estimates, and actual costs may vary based on the location, vehicle make and model, and the specific diagnosis and repair process required. It is recommended to consult with a qualified mechanic or auto repair shop to get a more accurate cost estimate for addressing the P0117 code on a 2013 Nissan Rogue.

What does this mean?

Tech Notes for P0117 2013 Nissan Rogue

If the coolant level is not low and thermostat is not stuck open or closed replacing the Engine Coolant Temperature (ECT) sensor should take care of the problem.

When is the Code Detected?

An excessively low voltage from the sensor is sent to ECM.

Need more information about the P0117 2013 Nissan Rogue code?

Need more information on how to fix the P0117 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0117 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0117 2013 Nissan Rogue Code

1. What are common symptoms of OBDII code P0117 in a 2013 Nissan Rogue?

The common symptoms of code P0117 in a 2013 Nissan Rogue include issues with the engine cooling system, such as overheating, poor fuel economy, rough idling, and a decrease in engine performance.

2. What does the OBDII code P0117 "Engine Coolant Temperature Circuit Low" mean in a 2013 Nissan Rogue?

The P0117 code in a 2013 Nissan Rogue indicates that the engine coolant temperature sensor is reading a temperature below the normal operating range.

3. What are the possible causes of OBDII code P0117 in a 2013 Nissan Rogue?

Possible causes of code P0117 in a 2013 Nissan Rogue include a faulty engine coolant temperature sensor, issues with the wiring or connectors related to the sensor, or a problem with the engine control module (ECM).

4. How can I diagnose the OBDII code P0117 in a 2013 Nissan Rogue?

You can diagnose the P0117 code in a 2013 Nissan Rogue by checking the engine coolant temperature sensor, inspecting the wiring and connectors for any damage or corrosion, and using a scan tool to monitor the sensor's readings.

5. Can I still drive my 2013 Nissan Rogue with OBDII code P0117?

It is not recommended to drive your 2013 Nissan Rogue with the P0117 code present, as it can lead to engine overheating and potential damage. It is best to address the issue promptly to avoid further complications.

6. How can I repair OBDII code P0117 in a 2013 Nissan Rogue?

To repair the P0117 code in a 2013 Nissan Rogue, you may need to replace the engine coolant temperature sensor, repair any damaged wiring or connectors, or reset the ECM after addressing the underlying issue.

7. Is it possible to reset the OBDII code P0117 in a 2013 Nissan Rogue without repairs?

While you can clear the P0117 code temporarily by resetting the ECM, it is crucial to address the root cause of the issue to prevent the code from reappearing. Ignoring the underlying problem may lead to further complications.

8. How much does it typically cost to repair OBDII code P0117 in a 2013 Nissan Rogue?

The cost to repair the P0117 code in a 2013 Nissan Rogue can vary depending on the exact cause of the issue and the labor rates in your area. Replacing the engine coolant temperature sensor or repairing wiring may cost between $100 to $300, including parts and labor.

9. Can a DIY enthusiast fix OBDII code P0117 in a 2013 Nissan Rogue?

A DIY enthusiast with the necessary tools and knowledge may be able to address the P0117 code in a 2013 Nissan Rogue by replacing the engine coolant temperature sensor or repairing wiring issues. However, if unsure, it is recommended to seek professional help.

10. Will OBDII code P0117 in a 2013 Nissan Rogue affect vehicle emissions?

Yes, the P0117 code in a 2013 Nissan Rogue can affect vehicle emissions by causing the engine to run inefficiently, potentially leading to increased emissions. It is essential to address the issue promptly to maintain the vehicle's emission levels within acceptable limits.

Discuss the causes and fixes for P0117 2013 Nissan Rogue OBDII Code

Submit a New Comment

Code P0117 2013 Nissan Rogue comments

No comments found for this page.