Engine-Codes.com
Engine-Codes – Nissan – P0117 2008 Nissan Rogue

P0117 2008 Nissan Rogue Code - Engine Coolant Temperature Circuit Low

Quick Answer

The P0117 diagnostic trouble code (DTC) for a 2008 Nissan Rogue indicates a problem with the Engine Coolant Temperature (ECT) Circuit being low. Common causes include Faulty ECT sensor, Short or open circuit in the ECT wiring, Corroded or damaged connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0117 2008 Nissan Rogue indicates Engine Coolant Temperature Circuit Low.
Common causes
Common causes include Faulty ECT sensor, Short or open circuit in the ECT wiring, Corroded or damaged connector.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0117 2008 Nissan Rogue Description

The P0117 diagnostic trouble code (DTC) for a 2008 Nissan Rogue indicates a problem with the Engine Coolant Temperature (ECT) Circuit being low. The ECT sensor is responsible for monitoring the temperature of the engine coolant and sending this information to the engine control module (ECM). The ECM uses this data to adjust fuel delivery and ignition timing, ensuring optimal engine performance and efficiency. When the ECT circuit is reading lower than expected, it can lead to issues with engine performance, fuel economy, emissions, and overall drivability.

OBDII Code P0117 2008 Nissan Rogue - Engine Coolant Temperature Circuit Low
P0117 2008 Nissan Rogue Code - Engine Coolant Temperature Circuit Low

Common Causes of P0117 2008 Nissan Rogue

  1. Faulty ECT sensor
  2. Short or open circuit in the ECT wiring
  3. Corroded or damaged connector
  4. ECM malfunction
  5. Coolant level or quality issues

Symptoms of P0117 2008 Nissan Rogue

  1. Engine running hotter or colder than normal
  2. Poor fuel economy
  3. Rough idling or stalling
  4. Check Engine Light illuminated
  5. Difficulty starting the engine

How to Fix P0117 2008 Nissan Rogue

  1. Begin by diagnosing the ECT sensor using a scan tool to monitor its readings and compare them to the actual coolant temperature.
  2. Inspect the ECT wiring for any signs of damage, corrosion, or loose connections. Repair or replace any damaged wiring as needed.
  3. Test the ECT sensor resistance with a multimeter to determine if it is functioning within specifications. Replace the sensor if it is out of range.
  4. Clear the DTC codes using a scan tool and monitor the vehicle's operation to ensure the issue has been resolved.
  5. If the problem persists, further diagnostic testing may be required to identify the root cause and address it accordingly.

Cost to Fix P0117 2008 Nissan Rogue

The typical repair costs for addressing a P0117 code on a 2008 Nissan Rogue can vary depending on the specific cause of the issue. Replacement ECT sensors typically range from $20 to $50, while labor costs can vary between $80 and $150 per hour. Additional costs may include diagnostic testing, wiring repairs, or ECM replacement if necessary. Overall, the total repair cost for this issue could range from $100 to $300 or more, depending on the extent of the repairs needed. It's recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of your vehicle.

What does this mean?

Tech Notes for P0117 2008 Nissan Rogue

If the coolant level is not low and thermostat is not stuck open or closed replacing the Engine Coolant Temperature (ECT) sensor should take care of the problem.

When is the Code Detected?

An excessively low voltage from the sensor is sent to ECM.

Need more information about the P0117 2008 Nissan Rogue code?

Need more information on how to fix the P0117 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0117 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0117 2008 Nissan Rogue Code

1. What does OBDII code P0117 on a 2008 Nissan Rogue indicate?

The code P0117 on a 2008 Nissan Rogue specifically points to an issue with the Engine Coolant Temperature Circuit registering as too low.

2. What are the common symptoms of OBDII code P0117 on a 2008 Nissan Rogue?

Common symptoms associated with code P0117 include the engine running hotter than normal, poor fuel economy, and potentially a check engine light illumination.

3. What are the possible causes of OBDII code P0117 on a 2008 Nissan Rogue?

The Engine Coolant Temperature Circuit Low code P0117 on a 2008 Nissan Rogue can be triggered by a faulty coolant temperature sensor, a wiring issue in the circuit, or a problem with the engine control module.

4. How can I diagnose the OBDII code P0117 on a 2008 Nissan Rogue?

Diagnosing code P0117 typically involves using a scan tool to check the coolant temperature sensor readings, inspecting the sensor and its wiring for damage, and testing the circuit for any faults.

5. Can I drive my 2008 Nissan Rogue with OBDII code P0117?

It is generally not recommended to drive your 2008 Nissan Rogue with code P0117 as it can lead to poor engine performance and potential overheating issues. It is best to address the problem promptly.

6. How can I repair OBDII code P0117 on a 2008 Nissan Rogue?

Repairing code P0117 may involve replacing the faulty coolant temperature sensor, repairing any damaged wiring in the circuit, or addressing any issues with the engine control module.

7. Will resetting the OBDII codes fix P0117 on a 2008 Nissan Rogue?

Simply resetting the OBDII codes may temporarily clear the check engine light, but it will not fix the underlying issue causing code P0117. Proper diagnosis and repair are necessary.

8. Is it safe to continue driving if the OBDII code P0117 comes and goes on a 2008 Nissan Rogue?

While the code may intermittently appear and disappear, it is still important to address the underlying issue causing code P0117 to prevent potential engine damage or performance issues.

9. Can a DIY enthusiast fix OBDII code P0117 on a 2008 Nissan Rogue?

Depending on your skill level and access to tools, some DIY enthusiasts may be able to diagnose and repair code P0117 by replacing the coolant temperature sensor or checking the wiring for issues.

10. How much does it typically cost to repair OBDII code P0117 on a 2008 Nissan Rogue?

The cost of repairing code P0117 on a 2008 Nissan Rogue can vary depending on the specific cause of the issue. Costs may include parts such as a new coolant temperature sensor and labor for diagnosis and repair.

Discuss the causes and fixes for P0117 2008 Nissan Rogue OBDII Code

Submit a New Comment

Code P0117 2008 Nissan Rogue comments

No comments found for this page.