P0116 2013 Nissan Rogue Code - Engine Coolant Temperature Sensor Circuit Range/Performance
Quick Answer
The P0116 diagnostic trouble code (DTC) for a 2013 Nissan Rogue refers to the Engine Coolant Temperature (ECT) Sensor Circuit Range/Performance. Common causes include Faulty ECT Sensor: The most common cause of a P0116 DTC is a faulty ECT sensor that is sending inaccurate readings to the ECM, Wiring Issues: Damage or corrosion to the wiring harness connecting the ECT sensor to the ECM can cause circuit range/performance issues, Poor Electrical Connection: A loose or poor electrical connection at the ECT sensor or ECM can lead to erratic sensor readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0116 2013 Nissan Rogue indicates Engine Coolant Temperature Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty ECT Sensor: The most common cause of a P0116 DTC is a faulty ECT sensor that is sending inaccurate readings to the ECM, Wiring Issues: Damage or corrosion to the wiring harness connecting the ECT sensor to the ECM can cause circuit range/performance issues, Poor Electrical Connection: A loose or poor electrical connection at the ECT sensor or ECM can lead to erratic sensor readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0116 2013 Nissan Rogue Description
The P0116 diagnostic trouble code (DTC) for a 2013 Nissan Rogue refers to the Engine Coolant Temperature (ECT) Sensor Circuit Range/Performance. This code is triggered when the ECT sensor is sending a signal that is out of the expected range or is not performing within the specified parameters. The ECT sensor is a crucial component of the engine management system, as it provides vital information to the engine control module (ECM) about the temperature of the coolant circulating through the engine.
Common Causes of P0116 2013 Nissan Rogue
- Faulty ECT Sensor: The most common cause of a P0116 DTC is a faulty ECT sensor that is sending inaccurate readings to the ECM.
- Wiring Issues: Damage or corrosion to the wiring harness connecting the ECT sensor to the ECM can cause circuit range/performance issues.
- Poor Electrical Connection: A loose or poor electrical connection at the ECT sensor or ECM can lead to erratic sensor readings.
- Coolant Level: Low coolant level or air pockets in the cooling system can affect the ECT sensor's performance and trigger a P0116 DTC.
- ECM Malfunction: In rare cases, a malfunctioning ECM can also cause a false P0116 DTC by misinterpreting ECT sensor data.
Symptoms of P0116 2013 Nissan Rogue
- Check Engine Light: The most common symptom associated with a P0116 DTC is the illumination of the check engine light on the vehicle's dashboard.
- Engine Overheating: A malfunctioning ECT sensor may provide inaccurate temperature readings, leading to engine overheating or improper cooling system operation.
- Poor Fuel Economy: A faulty ECT sensor can cause the engine to run rich or lean, resulting in reduced fuel efficiency.
- Rough Idle: Incorrect temperature readings from the ECT sensor can lead to a rough idle or stalling issues, as the ECM may not be able to adjust engine parameters correctly.
- Hard Starting: A malfunctioning ECT sensor may cause hard starting or extended cranking times, especially when the engine is cold.
How to Fix P0116 2013 Nissan Rogue
- Diagnose the Issue: Begin by using a scan tool to retrieve the specific DTC and confirm the P0116 code. Perform a visual inspection of the ECT sensor and its wiring harness for any obvious damage.
- Test ECT Sensor: Use a multimeter to test the ECT sensor's resistance and compare it to the manufacturer's specifications. Replace the sensor if it is out of range.
- Check Wiring and Connections: Inspect the wiring harness for any damage, corrosion, or loose connections. Repair or replace any faulty wiring as needed.
- Clear DTC: Once the issue has been resolved, clear the DTC from the ECM's memory using a scan tool. This will reset the check engine light and allow the vehicle to enter a normal operating mode.
- Test Drive: After completing the repair, take the vehicle for a test drive to confirm that the issue has been resolved. Monitor the engine's temperature, fuel economy, and overall performance to ensure everything is functioning correctly.
Cost to Fix P0116 2013 Nissan Rogue
The typical repair costs for addressing a P0116 DTC on a 2013 Nissan Rogue can vary depending on the specific cause of the issue. In general, replacing a faulty ECT sensor can cost between $50 and $150 for the part, with additional labor costs ranging from $50 to $150. If wiring repairs or ECM replacement are necessary, the total repair costs can increase accordingly.
When is the Code Detected?
Need more information about the P0116 2013 Nissan Rogue code?
Need more information on how to fix the P0116 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0116 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0116 2013 Nissan Rogue Code
1. What does the OBDII code P0116 on a 2013 Nissan Rogue indicate?
The code P0116 on a 2013 Nissan Rogue specifically points to an issue with the Engine Coolant Temperature Sensor Circuit Range/Performance.
2. What are the common symptoms of a P0116 code in a 2013 Nissan Rogue?
Common symptoms of a P0116 code in a 2013 Nissan Rogue may include inaccurate temperature readings on the dashboard, engine overheating, poor fuel economy, and potential stalling or rough idling.
3. What are the possible causes of the P0116 code in a 2013 Nissan Rogue?
Potential causes of a P0116 code in a 2013 Nissan Rogue include a faulty engine coolant temperature sensor, damaged wiring or connectors in the sensor circuit, low coolant levels, or a malfunctioning engine control module (ECM).
4. How can I diagnose the P0116 code on my 2013 Nissan Rogue?
Diagnosing a P0116 code on a 2013 Nissan Rogue involves using an OBDII scanner to retrieve the code, checking the coolant level, inspecting the sensor and its wiring for any damage, and testing the sensor's resistance with a multimeter.
5. What are the repair options for a P0116 code in a 2013 Nissan Rogue?
Repair options for a P0116 code in a 2013 Nissan Rogue may include replacing the engine coolant temperature sensor, repairing any damaged wiring or connectors, ensuring proper coolant levels, and resetting the fault code with an OBDII scanner.
6. Can a P0116 code in a 2013 Nissan Rogue cause engine damage?
While a P0116 code itself may not directly cause engine damage, ignoring the issue can lead to potential risks such as engine overheating, reduced fuel efficiency, and drivability problems if left unresolved.
7. Is it safe to continue driving with a P0116 code in a 2013 Nissan Rogue?
It is not recommended to drive your 2013 Nissan Rogue with a P0116 code, as it can affect the engine's performance and potentially lead to overheating issues. It's best to address the problem promptly to prevent further complications.
8. How much does it typically cost to repair a P0116 code in a 2013 Nissan Rogue?
The cost of repairing a P0116 code in a 2013 Nissan Rogue can vary depending on the underlying cause, but it may range from $100 to $300 for parts and labor, excluding diagnostic fees.
9. Can a DIY enthusiast fix a P0116 code in a 2013 Nissan Rogue?
Depending on your skill level and access to tools, DIY enthusiasts can attempt to fix a P0116 code by replacing the engine coolant temperature sensor and checking the wiring. However, professional diagnosis and repair may be recommended for accurate troubleshooting.
10. How long does it take to repair a P0116 code in a 2013 Nissan Rogue?
The repair time for a P0116 code in a 2013 Nissan Rogue can vary based on the extent of the issue and the repair process involved. It may take anywhere from 1 to 3 hours for a mechanic to diagnose and resolve the problem.
Discuss the causes and fixes for P0116 2013 Nissan Rogue OBDII Code
Code P0116 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.