P0114 2014 GMC Sierra Code - Intake Air Temperature Circuit Intermittent
Quick Answer
The P0114 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the Intake Air Temperature (IAT) sensor circuit intermittently malfunctioning. Common causes include Faulty IAT sensor, Loose or corroded electrical connections, Wiring harness issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0114 2014 GMC Sierra indicates Intake Air Temperature Circuit Intermittent.
- Common causes
- Common causes include Faulty IAT sensor, Loose or corroded electrical connections, Wiring harness issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0114 2014 GMC Sierra Description
The P0114 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the Intake Air Temperature (IAT) sensor circuit intermittently malfunctioning. The IAT sensor is responsible for measuring the temperature of the air entering the engine, providing crucial data to the engine control module (ECM) to adjust fuel delivery and ignition timing for optimal performance. When the ECM detects intermittent signal disruptions from the IAT sensor, it triggers the P0114 code, signaling a potential problem that needs to be addressed.
Common Causes of P0114 2014 GMC Sierra
- Faulty IAT sensor
- Loose or corroded electrical connections
- Wiring harness issues
- ECM software glitches
- Intake air leaks near the sensor
Symptoms of P0114 2014 GMC Sierra
- Decreased fuel efficiency
- Engine hesitation or rough idling
- Engine stalling or difficulty starting
- Check Engine Light illuminated
- Reduced engine power
How to Fix P0114 2014 GMC Sierra
- Begin by locating the IAT sensor, usually located near the air intake manifold.
- Inspect the sensor and its wiring for any visible damage, corrosion, or loose connections.
- Test the sensor using a multimeter to check for proper resistance values.
- If the sensor is faulty, replace it with a new one following manufacturer's guidelines.
- Clear the DTC with a scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0114 2014 GMC Sierra
The typical repair costs for addressing a P0114 code on a 2014 GMC Sierra can range from $100 to $300, including parts and labor. However, it is essential to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Auto repair shops commonly charge between $80 and $150 per hour for labor, with rates potentially higher in metropolitan areas or at dealerships, and lower at independent shops. It is recommended to inquire about local rates for a more accurate estimate.
Need more information about the P0114 2014 GMC Sierra code?
Need more information on how to fix the P0114 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0114 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0114 2014 GMC Sierra Code
1. What does the OBDII code P0114 mean on a 2014 GMC Sierra?
P0114 indicates an intermittent issue in the Intake Air Temperature (IAT) sensor circuit, meaning the sensor signal is not stable or consistent.
2. What are the symptoms of code P0114 in a 2014 GMC Sierra?
Symptoms may include rough idling, reduced engine performance, poor fuel economy, difficulty starting, or an illuminated check engine light.
3. What causes the P0114 code on a 2014 GMC Sierra?
Common causes include a faulty IAT sensor, damaged wiring or connectors, a loose sensor connection, or contamination on the sensor.
4. How do I locate the IAT sensor on a 2014 GMC Sierra?
The IAT sensor is typically located in the intake air duct between the air filter and the throttle body.
5. Can a dirty air filter trigger code P0114 on a 2014 GMC Sierra?
While unlikely, a heavily clogged air filter can affect airflow and potentially contribute to sensor issues or improper readings.
6. How do I fix the P0114 code on my 2014 GMC Sierra?
Start by inspecting the IAT sensor and its wiring for damage or loose connections. Clean or replace the sensor if necessary. If the issue persists, further diagnostics are required.
7. Can I drive my 2014 GMC Sierra with the P0114 code?
It’s possible but not recommended, as it may lead to poor performance, reduced fuel efficiency, and potential long-term engine damage.
8. How much does it cost to fix the P0114 code on a 2014 GMC Sierra?
The cost can vary, ranging from $50 to $200, depending on whether the IAT sensor or wiring needs repair or replacement.
9. Will replacing the IAT sensor always fix the P0114 code on a 2014 GMC Sierra?
Not always. If the issue is caused by damaged wiring, loose connections, or an ECM problem, replacing the sensor alone won’t resolve the code.
10. How can I prevent the P0114 code from recurring on my 2014 GMC Sierra?
Regularly inspect and maintain the air intake system, check for damaged wires or connectors, and keep the IAT sensor clean and free of debris.
Discuss the causes and fixes for P0114 2014 GMC Sierra OBDII Code
Code P0114 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.