P0113 2014 Chevrolet Silverado Code - Intake Air Temperature Circuit High Input
Quick Answer
The P0113 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that there is a high input signal detected in the intake air temperature (IAT) circuit. Common causes include Faulty IAT sensor, Wiring or connector issues in the IAT circuit, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2014 Chevrolet Silverado indicates Intake Air Temperature Circuit High Input.
- Common causes
- Common causes include Faulty IAT sensor, Wiring or connector issues in the IAT circuit, Intake air leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0113 2014 Chevrolet Silverado Description
The P0113 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates that there is a high input signal detected in the intake air temperature (IAT) circuit. This means that the Engine Control Module (ECM) has detected a voltage signal from the IAT sensor that is higher than the normal operating range. The IAT sensor is responsible for measuring the air temperature entering the engine, which is crucial for determining the correct air-fuel mixture for optimal combustion.
Common Causes of P0113 2014 Chevrolet Silverado
- Faulty IAT sensor
- Wiring or connector issues in the IAT circuit
- Intake air leaks
- ECM software issues
- Engine overheating affecting the IAT sensor
Symptoms of P0113 2014 Chevrolet Silverado
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Check Engine Light illuminated
- Reduced engine performance
How to Fix P0113 2014 Chevrolet Silverado
- Start by visually inspecting the wiring and connector of the IAT sensor for any signs of damage or corrosion. Repair or replace any damaged components.
- Test the IAT sensor using a multimeter to ensure it is functioning correctly. Replace the sensor if it is faulty.
- Check for any intake air leaks that could affect the IAT sensor readings. Repair any leaks found.
- Clear the DTC with a scan tool and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, consult a professional mechanic for further diagnostics and potential ECM reprogramming.
Cost to Fix P0113 2014 Chevrolet Silverado
The typical repair costs for addressing a P0113 code in a 2014 Chevrolet Silverado can range from $100 to $300, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on various factors. It is advisable to check local rates for a more precise estimate.
Need more information about the P0113 2014 Chevrolet Silverado code?
Need more information on how to fix the P0113 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2014 Chevrolet Silverado Code
What does the OBDII code P0113 mean on a 2014 Chevrolet Silverado?
P0113 indicates that the Powertrain Control Module (PCM) has detected a high input voltage from the Intake Air Temperature (IAT) sensor, meaning the sensor may be reporting an abnormally high temperature or malfunctioning.
What are the symptoms of P0113 on a 2014 Chevrolet Silverado?
Common symptoms include poor engine performance, reduced fuel efficiency, difficulty starting the vehicle, rough idling, or the Check Engine Light illuminating.
What causes the P0113 code to appear on a 2014 Chevrolet Silverado?
Possible causes include a faulty IAT sensor, damaged wiring or connectors, a disconnected sensor, or a problem with the PCM.
Can I drive my 2014 Chevrolet Silverado with the P0113 code?
While the vehicle may still be drivable, continued operation with this code can lead to reduced performance, potential damage to other engine components, and increased emissions.
How do I fix the P0113 code on my 2014 Chevrolet Silverado?
Potential fixes include inspecting and reconnecting the IAT sensor, repairing damaged wiring or connectors, replacing the IAT sensor if faulty, or addressing any PCM issues if necessary.
Where is the IAT sensor located on a 2014 Chevrolet Silverado?
The IAT sensor is typically located in the air intake system, near or within the air filter housing or air intake tube.
How do I know if the IAT sensor is faulty on my 2014 Chevrolet Silverado?
You can test the sensor using a multimeter to check resistance values against the manufacturer’s specifications. If the values are out of range, the sensor may be faulty.
Can a dirty air filter cause the P0113 code on a 2014 Chevrolet Silverado?
A dirty air filter is not a direct cause of P0113, but it can affect air intake flow, potentially leading to inaccurate readings from the IAT sensor.
How much does it cost to fix the P0113 code on a 2014 Chevrolet Silverado?
Repair costs vary depending on the issue but typically range from $50 to $200, including labor and parts, such as replacing the IAT sensor or repairing wiring.
Will clearing the P0113 code solve the issue on a 2014 Chevrolet Silverado?
Clearing the code without addressing the underlying issue may temporarily turn off the Check Engine Light, but the code will likely return until the root cause is fixed.
Discuss the causes and fixes for P0113 2014 Chevrolet Silverado OBDII Code
Code P0113 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.